• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.194-205
• /
• 2018

This study investigated knowledge and attitudes of long-term care hospital nursing assistants such as nursing aides and direct care workers toward patient safety and their safety care activities. This was a descriptive study that attempted to enhance the competence of nursing assistants' patient safety management, and the data were used to develop a training program for nursing assistants. A total of 230 nursing assistants working at six hospitals whose wards were over 200 participated and were assessed with a rating 1 or 2 in 2013 in B city. Data were collected using questionnaires from March 2 to March 26 in 2017. The collected data were analyzed by the SPSS/WIN 20.0 program using number, percentage, mean, standard deviation, t-test, ANOVA, $Scheff{\acute{e}}$ test, correlation coefficient, and multiple regression. In conclusion, the findings show that patient safety care activities were better performed by nursing aides than direct care workers. Higher education and a higher number of patient safety training programs and patient safety care activities were frequent. In addition, nursing assistants' knowledge of patient safety affected attitudes toward patient safety, and attitudes affected patient safety care activities. Therefore, an actual regular training program for patient safety should be executed over five times a year to improve patient safety perception. Furthermore, a hospital system including adequate working time needs to be improved. Based on the results of the study, patient safety in long-term care hospitals should be improved, and this study could be utilized as basic data to develop a training course for improvement of knowledge and attitudes of nursing assistants toward patient safety.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.47-52
• /
• 2007

Quality evaluations of seasoning chicken wing treated with pine needles during storage of 6 days at $4^{\circ}C$ were assessed. Seasoning chicken containing 0.5-1.3% (w/w) pine needle during storage at $4^{\circ}C$ was allowed to the growth of Staphylococcus aureus. pH values of seasoning chicken containing pine needles after 6 days of storage were not significantly different (p>0.05) than those of the controls. The rate of drip loss on seasoning chicken containing pine needles after 24 hr of storage was significantly different (p<0.05) than that of the controls. Sensory scores of seasoning chicken containing 0.8-1.3% pine needles for odor and flavor were in the "liked more" to typical category during storage of 6 days at $4^{\circ}C$. For odor and flavor scores, seasoning chicken containing 1.0-1.3% pine needles compared to the controls and other treatments increased during storage days due to fresh odor of pine needles. Seasoning chicken containing 0.5-1.3% pine needles after 6 days of storage were no significantly different levels (p>0.05) of Hunter color $L^*$ values compared to controls. Hunter color $a^*$ and $b^*$ values of seasoning chicken containing 0.5-1.3% pine needles after 6 days of storage were significantly different (p<0.05) than those of the controls.

• Clean Technology
• /
• v.17 no.4
• /
• pp.336-345
• /
• 2011

The total area of forest land in Korea is 64.2%, and significant forest resources can continuously be produced. However our country didn't separate the recyclable waste wood and was illegal landfill or incinerated. In this study, waste-wood and rice husk of biomass and low-grade-anthracite made refuse derived fuel by mixing and compressing. In addition, the binding effect of binders and additives were analyzed. Physical and chemical characteristics of manufactured refuse derived fuel were analyzed and evaluated suitability by compared with quality standards. A result of change with compressed and relaxed density, added 20% anthracite and 10% rice husk is optimal density change and average density increased large range when 20 wt.% P.V.A., guargum, molasses and 10 wt.% starch were added. All fuel samples be distributed over 3,500 kcal/kg LHV and grade of No. 3~4 fuels appeared. A result of the characteristics of physical and chemical compressed biomass refuse derived fuel with addictive, 12.9% of durability improvement appeared when is mixing asphalt and 5.8% of durability improvement appeared when is mixing rice bran by pretreatment of NaOH 5%.

• The Korean Journal of Pesticide Science
• /
• v.15 no.1
• /
• pp.22-27
• /
• 2011

Nonylphenols are toxic compounds classified as endocrine disruptors. We investigated the nonylphenols clean-up procedures for the contamination control in the quantitative analysis. In this research we analyzed the residual nonylphenols in the solvent and the SPE cartridges. First, at the analysis of HPLC grade solvents (n-hexane, diethyl ether, ethyl acetate and its mixture), diethyl ether was confirmed the residue as 0.963 ${\mu}g/mL$, and we eliminated the contaminant through the distillation with $CaH_2$, Second, at the analysis of SPE cartridges (silica gel and Florisil), all products were showed the residue at 0.046~13.0 ${\mu}g/mL$, but unfortunately the residue in the cartridge were not easily removed with referenced methods in all tested SPE cartridges except in silica gel SPE cartridge with glass ware.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2396-2401
• /
• 2009

This study is on development of UV-cured hard coating compounds which have more improved abrasion resistance than existing UV-cured urethane-acrylic resin, to prevent a surface of a widely used PVC tile as a constructive material from being scratched. To make a high abrasion resistant hard coating solution compared to UV-cured urethane-acrylic resin which has no abrasion resistance and been used for PVC tiles, we added powder substances of different abrasion resistant level, $Al_2O_3$(Al-160SG-3), $Al(OH)_3$(SH-8W), $SiO_2$(KS-5000), etc., to the resin, changing their contents from 10% to 30% against quantities of resin, and compounded it using Ring-Mill. After coating PVC tiles with the hard coating solution using bar-coating method that can adjust a thickness, we estimated some surface properties-abrasion resistance, pencil hardness, adhesive power, thickness of coating, and so on. As a result, a hard coating solution added 30% $Al_2O_3$ powder to the resin had the finest surface properties-the first grade in abrasion resistance, H in pencil hardness, 100% in adhesive power, and a hard coating solution which showed excellent solidity and abrasion resistance has smaller particle size, higher powder content, and thicker coating thickness.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.790-803
• /
• 2019

The dioctyl terephthalic acid (DOTP) process produces plastic plasticizers by esterification of terephthalic acid with powder in the form of octanol. In this study, the dust explosion characteristics of terephthalic acid directly injected into the manhole in the form of powder in the presence of flammable solvent or vapor in the reactor of this process were investigated. Dust particle size and particle size distribution dust characteristics were investigated, and pyrolysis characteristics of dust were investigated to estimate fire and explosion characteristics and ignition temperature. Also, the minimum ignition energy experiment was performed to evaluate the explosion sensitivity. As a result, the average particle size of terephthalic acid powder was $143.433{\mu}m$. From the thermal analysis carried out under these particle size and particle size distribution conditions, the ignition temperature of the dust was about $253^{\circ}C$. The lower explosive limit (LEL) of the terephthalic acid was determined to be $50g/m^3$. The minimum ignition energy (MIE) for explosion sensitivity is (10 < MIE < 300) mJ, and the estimated minimum ignition energy (Es) based on the ignition probability is 210 mJ. The maximum explosion pressure ($P_{max}$) and the maximum explosion pressure rise rate $({\frac{dP}{dt}})_{max}$ of terephthalic acid dust were 7.1 bar and 511 bar/s, respectively. The dust explosion index (Kst) was 139 mbar/s, corresponding to the dust explosion grade St 1.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2019

The biotic stress of garlic and tobacco infected by bacteria and virus was evaluated using a thermal imaging camera in a growth chamber. The remote sensing technique using the thermal camera detected that garlic leaf temperature increased when the leaves were infected by bacterial soft rot of garlic. Furthermore, the temperature of leaf was relatively high for the leaves where the colony-forming unit per mL was large. Such temperature patterns were detected for tobacco leaves infected by Cucumber Mosaic Virus using thermal images. In addition, the crop water stress index (CWSI) calculated from leaf temperature also increased for the leaves infected by the virus. The event such that CWSI increased by the infection of the virus occurred before visual disease symptom appeared. Our results suggest that the thermal imaging camera would be useful for the development of crop remote sensing technique, which can be applied to a smart farm.

• Conservation Science in Museum
• /
• v.27
• /
• pp.103-124
• /
• 2022

This study examined the properties of the materials used in the three-story pagoda at Jangha-ri, Buyeo. It was performed in order to identify the objective condition of the pagoda and establish an appropriate plan for the conservation treatment of the pagoda. According to the study, the average total magnetic susceptibility was 3.71 (10^-3 SI unit), and at least four types of granite with different origins were likely used in the production of the pagoda. The ultrasonic velocity averaged 1,519m/s, and the coefficient of weathering showed an average of grade 4. The thermal gradient between the cement (restoration materials) and original materials was identified through thermal imaging. In some areas, the cement restoration materials required replacement with new stone materials with properties similar to those of the original stone materials. Taking into account these results, a map of weathering damage was prepared and appropriate conservation treatment plans were established based on the findings of previous studies. Since the pagoda had suffered severe biological damage and discoloration, surface contaminants were removed through wet cleaning with distilled water and a brush. The exfoliated areas were reinforced on the site by mixing epoxy resin with powdered stone with the same properties as the original stone materials of the pagoda.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.713-723
• /
• 2023

Climate change is significantly affecting coastal areas, and its impacts are expected to intensify. Recent studies on climate change adaptation and risk assessment in coastal regions increasingly integrate the concepts of recovery resilience and vulnerability. The aim of this study is to develop a measurement model for coastal hazard recovery resilience in the context of climate change adaptation. Before constructing the measurement model, a comprehensive literature review was conducted on coastal hazard recovery resilience, establishing a conceptual framework that included operational definitions for vulnerability and recovery resilience, along with several feedback mechanisms. The measurement model for coastal hazard recovery resilience comprised four metrics (MRV, LRV, RTSPV, and ND) and a Coastal Resilience Index (CRI). The developed indices were applied to domestic coastal erosion cases, and regional analyses were performed based on the index grades. The results revealed that the four recovery resilience metrics provided insights into the diverse characteristics of coastal erosion recovery resilience at each location. Mapping the composite indices of coastal resilience indicated that the areas along the East Sea exhibited relatively lower coastal erosion recovery resilience than the West and South Sea regions. The developed recovery resilience measurement model can serve as a tool for discussions on post-adaptation strategies and is applicable for determining policy priorities among different vulnerable regional groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.334-340
• /
• 2003

This study was conducted to evaluate the effects of dietary herbal extracts mixture on the growth rate. carcass traits and serological changes in finishing pigs. For the Exp 1, eighty Duroc(Yorkshir(Landrace pigs(81.58$\pm$3.20kg average initial body weight) were used in a 45 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) NCM(NC diet added 0.1% of herbal plant mixture) and 4) PCM(PC diet added 0.1% of herbal plant mixture). Through the entire experimental period, ADG of pigs fed NCM and PCM diets was greater(P<0.08) than that of pigs fed NC diet. There was interaction of ADG(P<0.01) in pigs fed NC diet with herbal plant mixture compared to pigs fed PC diet with herbal plant mixture. ADFI and G/F tended to increase in PC and NCM treatments. However, there were not significantly differences among the treatments. Total protein of serum was improved by supplementation of the herbal plant mixture in NC diet(P<0.04). For the Exp 2. one hundred Duroc(Yorkshir(Landrace pigs(77.36$\pm$2.01kg average initial body weight) were used in a 28 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) PM0.1(NC diet added 0.1% of herbal plant mixture) and 4) PM0.2(NC diet added 0.2% of herbal plant mixture). Through the entire experimental period, ADG tended to increase in PC treatment. However, there was not significantly difference among the treatments. Carcass weight in NC was higher than other treatments(P<0.06). Backfat thickness was higher in pigs fed PC than other treatments. However, there was not significantly difference among the treatments. A grade appearances of carcass tended to increase in pigs fed PM(P<0.09). In conclusion, the results of the experiments suggest that pigs fed PM could be a beneficial growth performance and serogical immunity for finishing pigs.