• Korean Journal of Environment and Ecology
• /
• v.35 no.4
• /
• pp.336-346
• /
• 2021

The enforcement of the Nagoya Protocol, which regulates the acquisition and use of genetic sources, an essential material for biotechnology R&D, has imposed a burden for additional documentation works to researchers. In the past, countries regarded genetic resources as a common human heritage and thus allowed researchers to use them freely. However, they can no longer afford the luxury of such freedom now since many countries are introducing new laws and regulations on the acquisition and use of the resources as the Nagoya Protocol recognizes the exclusive ownership of genetic resources. Therefore, Korea, which is highly dependent on foreign genetic resources, needs a more systematic response. This paper aims to review the key contents of the Nagoya Protocol to raise awareness among domestic and foreign genetic resource users, including researchers of environment and ecology and present the overall structure, and flow of acquisition, access, and benefit sharing (ABS) for the use of foreign genetic resources to help them respond appropriately to the new landscape. The researchers' efforts and support at the national level are necessary at the same time to appropriately respond to the Nagoya Protocol. First, the researchers must understand the overall framework and the specific response in each stage under the Nagoya Protocol scheme. It is necessary to respond to the ABS procedure of the resource provider country from accessing genetic resources to sharing benefits resulting from it. In that regard, the Nagoya Protocol has imposed more restrictions on research activities and raised the burden outside of research. The current trend of recognizing the country's sovereign rights over genetic resources is likely to continue and widespread worldwide as resource-rich countries are expected to continue protecting their resources. Therefore, our study will help environmental ecology researchers understand ABS and conduct research under the Nagoya Protocol and legal obligations of resource provider countries step by step, from access to benefit sharing.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.743-752
• /
• 2019

The flow in the meandering channel is characterized by the spiral motion of secondary currents that typically cause the erosion along the outer bank. Hydraulic structures, such as spur dike and groyne, are commonly installed on the channel bottom near the outer bank to mitigate the strength of secondary currents. This study is to investigate the effects of submerged vanes installed in a $90^{\circ}$ meandering channel on the development of secondary currents through three-dimensional numerical modeling using the hybrid RANS/LES method for turbulence and the volume of fluid method, based on OpenFOAM open source toolbox, for capturing the free surface at the Froude number of 0.43. We employ the second-order-accurate finite volume methods in the space and time for the numerical modeling and compare numerical results with experimental measurements for evaluating the numerical predictions. Numerical results show that the present simulations well reproduce the experimental measurements, in terms of the time-averaged streamwise velocity and secondary velocity vector fields in the bend with submerged vanes. The computed flow fields reveal that the streamwise velocity near the bed along the outer bank at the end section of bend dramatically decrease by one third of mean velocity after the installation of vanes, which support that submerged vanes mitigate the strength of primary secondary flow and are helpful for the channel stability along the outer bank. The flow between the top of vanes and the free surface accelerates and the maximum velocity of free surface flow near the flow impingement along the outer bank increases about 20% due to the installation of submerged vanes. Numerical solutions show the formations of the horseshoe vortices at the front of vanes and the lee wakes behind the vanes, which are responsible for strong local scour around vanes. Additional study on the shapes and arrangement of vanes is required for mitigate the local scour.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2020

Objective : The purpose of this study is to present an analysis model in developing an inclusive response for safety hazards and disaster preventive information system for vulnerable people to the disaster including persons with disabilities, and those with specific needs. Methods : In this study, the persona analysis method is used to analyze fictitious characters that correspond to various characteristics such as age, disability, environment, occupation, etc. in terms of the scenario of some particular disaster subjects. Based on the user's communication problems derived from the persona analysis, focused group interview and ICF based analysis were implemented to identify needs and arbitration methods. Results : The needs from persona analysis and ICF-based communication items analysis identifies the factors that make each fictitious character difficult in terms of communication in obtaining the benefits consistent with the purpose of the service. The study derives service requirements that can provide arbitration or facilitation methods to increase communication ability of the users. Conclusion : Through the persona analysis method, difficulties that could occur when receiving disaster information using communication devices were identified and analyzed in conjunction with communication problems described in the ICF. In building information services for the prevention of safety hazards and disasters, this study presented a model that uses the persona analysis method and the ICF classification system to derive user requirements for accessible information system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.207-235
• /
• 2022

In a knowledge-based society where knowledge and information industries are the main pillars of the economy, knowledge sharing and diffusion and its systematic management are recognized as essential strategies for improving national competitiveness and sustainable social development. In the field of Information Systems (IS) research, where the convergence of information technology and management takes place in various ways, the evolution of knowledge occurs only when researchers cooperate in turning old knowledge into new knowledge from the perspective of the scientific knowledge network. In particular, it is possible to derive new insights by identifying topics of interest in the relevant research field, applied methodologies, and research trends through network-based interdisciplinary graftings such as citations, co-authorships, and keywords. In previous studies, various attempts have been made to understand the structure of the knowledge system and the research trends of the relevant community by revealing the relationship between research topics, methodologies, and co-authors. However, most studies have compared two or more journals and been limited to a certain period; hence, there is a lack of research that looked at research trends covering the entire history of IS research. Therefore, this study was conducted in the following order for all the papers (from its first issue in 1977 to the first quarter of 2022) published in the MIS Quarterly (MISQ) Journal, which plays a leading role in revealing knowledge in the IS research field: (1) After extracting keywords, (2) classifying the extracted keywords into research topics, methodologies, and theories, and (3) using topic modeling and keyword network analysis in order to identify the changes from the beginning to the present of the IS research in a chronological manner. Through this study, it is expected that by examining the changes in IS research published in MISQ, the developing patterns of IS research can be revealed, and a new research direction can be presented to IS researchers, nurturing the sustainability of future research.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.102-111
• /
• 2022

Termites are a group of social insects that are one of the primary causes of damage to wooden architectural heritage. Since termite damage impairs the authenticity and structural stability of cultural heritage, it is imperative to prevent it. This study examines the extent of termite damage to wooden architectural heritage as part of efforts to prevent termite damage to nationally designated wooden architectural heritage sites across the country. The extent of termite damage to each cultural heritage was assessed qualitatively and quantitatively and comparatively analyzed by region using the results of the "Investigation on Biological Damage to Wooden Architectural Heritages" conducted by the National Research Institute of Cultural Heritage from 2016 to 2019. It involved 362 nationally designated wooden architectural heritages(25 national treasures, 157 treasures, 180 national folklore cultural heritages) and 1,104 buildings. The results were as follows: termite detection dogs reacted at 317(87.6%) of the 362 wooden heritages, with visible termite damage observed in 185 cases(51.1%). Furthermore, termite damage was confirmed using one of two methods(detection dogs or visual inspection) in 324 cases(89.5%). Of the 1,104 buildings, termite detection dogs reacted at 668(60.5%), while 339(30.7%) showed visible termite damage. Employing one of the two methods, damage was confirmed in 702 buildings(63.6%). The country was categorized into nine regions(Seoul Metropolitan Area, Gangwon, Chungbuk, Chungnam, Jeonbuk, Jeonnam, Gyeongbuk, Gyeongnam, and Jeju) to examine the termite damage rate and the degree of damage to each cultural heritage according to location. Termite detection dogs reacted to more than 70% of the cultural heritage in all regions. Visible damage was minimal in the Seoul metropolitan area(32.1%) and Gangwon(21.4%) but severe in Chungnam(65.6%), Jeonnam(67.3%), and Gyeongnam(68.2%). By quantifying the degree of termite damage of each cultural heritage as a ratio of the absence of termite damage among the total absence, the average termite damage of the cultural heritage across the country was 9.2%. Regional variance analysis showed that the cultural heritage in Jeonbuk and Jeonnam showed a statistically significantly higher degree of termite damage than the cultural heritage in the Seoul metropolitan area, Chungbuk, and Gyeongbuk. This paper comprehensively analyzed termite damage to nationally designated wooden architectural heritage. The findings are expected to be valuable in establishing policies for the preservation and management of cultural heritage sites in the future.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.69-84
• /
• 2021

As industrial structural changes in the 4th Industrial Revolution have recently led to the need for fostering high-tech industries and high-tech manufacturing industries have been showing high value-added creation, the importance of high-tech manufacturing ventures has increased a lot as well. As a result of this, the government is actively supporting and fostering them. However, it appears that high-tech manufacturing ventures seem to have a lot of difficulty in securing competitive advantages due to the lack of internal core competencies and experience in the rapidly changing international economic conditions. In order for high-tech manufacturing ventures to strengthen internal core competencies, external collaborations with other companies or institutions which have diverse experience, technology skills and abundant resources are actively promoted. Accordingly, based on resource-based theory and transaction cost theory, the authors analyzed the effects of the high-tech manufacturing ventures'external collaborations on internal core competencies and management performance in this study. In order to verify the hypothesis of this study, the 2020 data on"The Research on the Precision Status of Ventures'compiled by the Ministry of SMEs and Startups since 1999 were utilized. According to the results of this study, the experience of external collaborations had a positive impact on the internal core competencies and non-financial management performance, while there was no direct impact on financial management performance. Moreover, the relationship between the experience of external collaborations and management performance is mediated by the internal core competencies. Additionally, it was found that the internal core competencies positively affected both non-financial and financial management performances, and non-financial management performance again had a significant impact on the financial management performance. Finally, the experience of external collaborations had a positive impact on both development, manufacturing, and marketing factors forming the internal core competencies. However, the impacts of individual factors were different in the management performance. Development and marketing factors were shown to have a significant impact on both non-financial and financial management performance, while the manufacturing factor had a significant impact only on financial management performance.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.75-88
• /
• 2021

The film won the Golden Palm Award at the Cannes Film Festival, and received the Academy Award for a non-English-speaking film in February 2020, respectively. It has received a monumental evaluation in the world film history. Overall, this film is about class conflict, and critics evaluate the theme of the film as "badly twisted class gap" and "anger from class." The film expresses an intrinsic conflict embodied in culture as a "tragedy in which no bad person appears," rather than the dichotomous composition of the classical class struggle from Marxism. In other words, this can be seen as expressing the substrated class relationship of the modern society that Pierre Bourdieu had argued. This film has been focused as a controversial target under Korea society with excess of ideology. Politics used to adopt the keyword, 'parasite', for political disputes not only in culture contents world. Paradoxically socialism China did not allow to release film 'Parasite.' On the other hand, Lee O-Yong argues that the movie "Parasite" does not look at social phenomena through a dichotomous perspective, but is viewed through a "double perspective" and evaluates that it does not lose eyes looking at humans through tension. This view is based upon 'Vital Capitalism'. Lee. O-Yong looks at the movie "Parasite" from the perspective of "Vital Capitalism". The theory of Vital Capitalism does not seek to find the root of historical development in class struggle conflicts, but rather figuring out history and society pays attention onto the intrinsic characteristics of life, Topophilia, Neophilia, and Biophilia. Lee Eo-ryeong argues that the development of civilization theory evolved from the stage of Hobbes' Darwinism or predatism to the stage of host vs. parasite of Michel Serres, and onto the stage of Margulis's 'Win-Win (inter-dependence)'. In this paper, after overview of vital capital concept and preceeding research, re-interpretations were tried onto scenes based upon fields from habitus, culture capital. This exploration looks for a alternative for excess of ideology in Korea society.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1827-1836
• /
• 2022

Disasters that occur unexpectedly are difficult to predict. In addition, the scale and damage are increasing compared to the past. Sometimes one disaster can develop into another disaster. Among the four stages of disaster management, search and rescue are carried out in the response stage when an emergency occurs. Therefore, personnel such as firefighters who are put into the scene are put in at a lot of risk. In this respect, in the initial response process at the disaster site, robots are a technology with high potential to reduce damage to human life and property. In addition, Light Detection And Ranging (LiDAR) can acquire a relatively wide range of 3D information using a laser. Due to its high accuracy and precision, it is a very useful sensor when considering the characteristics of a disaster site. Therefore, in this study, development and experiments were conducted so that the robot could perform real-time monitoring at the disaster site. Multi-sensor module was developed by combining LiDAR, Inertial Measurement Unit (IMU) sensor, and computing board. Then, this module was mounted on the robot, and a customized Simultaneous Localization and Mapping (SLAM) algorithm was developed. A method for stably mounting a multi-sensor module to a robot to maintain optimal accuracy at disaster sites was studied. And to check the performance of the module, SLAM was tested inside the disaster building, and various SLAM algorithms and distance comparisons were performed. As a result, PackSLAM developed in this study showed lower error compared to other algorithms, showing the possibility of application in disaster sites. In the future, in order to further enhance usability at disaster sites, various experiments will be conducted by establishing a rough terrain environment with many obstacles.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.5
• /
• pp.431-449
• /
• 2022

As many tunnels generally have been constructed, various experiences and techniques have been accumulated for tunnel design as well as tunnel construction. Hence, there are not a few cases that, for some usual tunnel design works, it is sufficient to perform the design by only modifying or supplementing previous similar design cases unless a tunnel has a unique structure or in geological conditions. In particular, for a tunnel blast design, it is reasonable to refer to previous similar design cases because the blast design in the stage of design is a preliminary design, considering that it is general to perform additional blast design through test blasts prior to the start of tunnel excavation. Meanwhile, entering the industry 4.0 era, artificial intelligence (AI) of which availability is surging across whole industry sector is broadly utilized to tunnel and blasting. For a drill and blast tunnel, AI is mainly applied for the estimation of blast vibration and rock mass classification, etc. however, there are few cases where it is applied to blast pattern design. Thus, this study attempts to automate tunnel blast design by means of machine learning, a branch of artificial intelligence. For this, the data related to a blast design was collected from 25 tunnel design reports for learning as well as 2 additional reports for the test, and from which 4 design parameters, i.e., rock mass class, road type and cross sectional area of upper section as well as bench section as input data as well as16 design elements, i.e., blast cut type, specific charge, the number of drill holes, and spacing and burden for each blast hole group, etc. as output. Based on this design data, three machine learning models, i.e., XGBoost, ANN, SVM, were tested and XGBoost was chosen as the best model and the results show a generally similar trend to an actual design when assumed design parameters were input. It is not enough yet to perform the whole blast design using the results from this study, however, it is planned that additional studies will be carried out to make it possible to put it to practical use after collecting more sufficient blast design data and supplementing detailed machine learning processes.