• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.459-465
• /
• 2013

In the manufacturing process of steel plates, materials at high temperatures above $800^{\circ}C$ are rapidly cooled by using a circular impinging water jet to determine their strength and toughness. In this study, the basic heat and fluid flow is solved by using the existing numerical model for boiling heat transfer. Actually, steel undergoes a phase change from austenite to ferrite or bainite during the cooling process. The phase change induces changes in its thermal properties. Instead of directly solving the phase change and the material cooling together, we solve the heat transfer only by applying the thermal properties that vary with temperature, which is already known from other studies. The effects of the changes in the thermal properties on the cooling of steel and the necessity of calculating the phase change are discussed.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.225-232
• /
• 1997

Material properties of a new composite composed of components with known material properties are usually investigated through experiments. Elastic modulus and Poisson's ratio are measured at various volume fractions of mixed components and utilized as the base information on an analytical model for predicting the mechanical behaviors of a structure constructed by the composite. Elastic material properties of a composite at various volume fractions are numerically estimated by minimizing the error between the static displacements computed from a model for the composite and those computed from a model of homogeneous and isotropic material. A finite element model for a composite is proposed to distribute different types of material components easily into the model depending on the volume fraction. Then, the material properties of a composite filled with solid mircospheres are predicted numerically through a sample study and the estimated results are compared with experimental results and some theoretical equations.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.24-31
• /
• 2001

An axial-type turbine design technology is developed. In order to design one-stage turbine, the preliminary design method is applied, and then design parameters are chosen after analyzing gas properties within the turbine passage using the streamline curvature method. Stator blade is designed using C4 profile, and rotor blade is designed using shape parameters. Stator is manufactured as an integral type and rotor is manufactured to be disassembled from the disc for changing blade incidence angle. The output power from the rotor is measured with various RPM and input power. Experimental results show that the maximum efficiency of turbine rotor is obtained on the design point, and the output power is proportionally decreased with the negative incidence angle even the test turbine is a reaction turbine. The efficiency of turbine rotor is decreased to 5% by $7.5^{\cire}$ negative incidence angle from the designed value.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.34-41
• /
• 2003

A Green's function approach is adopted for analyzing the thermoelastic deformation and stress analysis of a plate made of functionally graded materials (FGMs). The solution to the 3-dimensional steady temperature is obtained by using the laminate theory. The fundamental equations for thermoelastic problems are derived in terms of out-plane deformation and in-plane force, separately. The thermoelastic deformation and the stress distributions due to the bending and in-plane forces are analyzed by using a Green’Às function based on the Galerkin method. The eigenfunctions of the Galerkin Green's function for the thermoelastic deformation and the stress distributions are approximated in terms of a series of admissible functions that satisfy the homogeneous boundary conditions of the rectangular plate. Numerical examples are carried out and effects of material properties on thermoelastic behaviors are discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.887-894
• /
• 2013

Effective thermal conductivity of nanofluids has been predicted by using generalized self-consistent model and modified Eshelby model, which have been used for analysis of material properties of composites. A nanolayer between base fluid and nanoparticle, one of key factors for abrupt enhancement of thermal conductivity of nanofluids, is included in the analysis. The effective thermal conductivities of the nanofluid predicted by the present study show good agreement with those by models in the literature for the nanolayer with a constant or linear thermal conductivity. The predicted results by the present approach have been confirmed to be consistent with experiments for representative nanofluids such as base fluids of water or ethyleneglycol and nanoparticles of $Al_2O_3$ or CuO to be validated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.73.1-73.1
• /
• 2011

석탄가스화 복합발전(IGCC) 시스템은 고온 고압으로 운전되는 가스화기에서 미분탄을 산소와 함께 가스화하여 주로 CO 및 $H_2$를 생성하고 이때 발생되는 먼지 및 황성분은 각각 집진기 및 탈황장치에서 제거되며, 석탄 회분은 고온에서 용융되어 슬래그의 형태로 배출되는 방식을 사용하고 있다. 본 연구에서는 석탄가스화 복합발전시스템 설계에 필요한 기본자료를 파악하기 위해서, 고온 고압의 운전조건에서 1일 3톤의 석탄을 처리할 수 있는 Bench Scale급 석탄가스화기를 이용하여 가스화에 사용된 원탄 및 가스화기 설비의 각 지점에서 샘플링한 고체 시료를 중심으로 열화학적 특성을 살펴보았다. 가스화 실험은 아역청탄 계열의 ABK 석탄을 대상으로 가스화기 내부의 온도와 압력을 $1400{\sim}1450^{\circ}C$, $7.5{\sim}7.6Kg/cm^2$로 유지시키면서 실시하였다. 실험에 사용된 석탄 시료의 기본적인 물성치를 조사하기 위하여 표준방법에 따라 석탄의 공업분석, 원소분석, 발열량분석 등을 실시하였다. 석탄가스화기에서 배출된 슬래그와 대상 석탄 회분의 특성을 파악하기 위해서 XRF를 이용한 회분의 성분분석, Heating Microscope를 이용한 회분의 용융점 분석, XRD를 이용한 회분과 슬래그내의 화합물의 형태 및 결정구조 파악, SEM을 이용한 슬래그의 형상 등을 분석하였다. 또한 석탄가스화기 시스템을 구성하는 각 설비의 특성을 파악하기 위해서 관련 설비의 특정 지점에서 채취한 시료의 입도분석, 원소분석, 촤 회분 무게비, 슬래그중의 잔존탄소함량, 슬래그와 슬래그로부터 제조된 용출수내의 중금속 함량분석 등을 실시하였다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.37-46
• /
• 2008

Application of resilient modulus, representing mechanical behavior of pavement materials, has become general concept for pavement design, analysis and maintenance after '86 AASHTO selected it as a basic input property of subgrade. It is known that resilient modulus of domestic subgrade soil is affected greatly by material factors, such as water content and dry weight unit, and stress components, such as deviatoric stress and confining stress, while effects of loading frequency and loading repeat were regarded negligible. If design based on resilient modulus is to be successfully implemented, design input variables of relevant models should be able to reflect local conditions. In this study, generalized mechanical model for subgrade is proposed. Model parameters are estimated from test results. Verification of the model was performed through finite element analysis using the proposed model, which showed good agreement with measured results of pavement deflections.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.267-275
• /
• 1996

금속과 같은 균질한 재료의 균열파괴의 특성을 설명하기 위하여 도입된 파괴역학의 이론들은 1960년대 이후 콘크리트나 암석 등에 대하여 적용되기 시작하였다. 파괴인성계수(fracture toughness)는 균열의 성장에 대한 재료의 저항을 나타낸다. 그러나, 암석의 파괴역학적 특성은 암석이 갖는 불균질성이나 비등방성에 의하여 영향을 받는다. 즉, 암석의 파괴역학적 특성의 측정은 시험편의 크기나 초기균열의 길이, 시험편의 형상 등에 의하여 측정자료의 분산이 심하며 따라서 다른 기본 물성들의 경우에서와 마찬가지로 일정한 시험기준의 도입이 요구되었다. 1988년에 국제암반공학회(ISRM)에서 제시한 표준시험방법은 시험편의 제작이나 시험방법에 있어서 복잡한 과정을 요구하고 있다. 본 논문에서는 표준시험방법에서 사용되는 시험편의 형태에 비하여 비교적 간단한 시험방법들에 의하여 얻어진 파괴적인성계수들을 서로 비교하여 제시하고 시험편의 크기와 기타 시험조건에 따른 파괴인성계수 측정치의 변화를 나타내고 있다. 또한, 암석에 포함되어있는 자연균열들의 특성과 파괴역학실험 중 유발되는 인공균열들의 형태를 비교하여 실험실에서 얻은 파괴역학적 계수들의 현장적용에 대한 문제점들을 지적하고 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.167-172
• /
• 2001

구조최적화는 기계구조물의 동특성을 변경하기 위하여 필수적으로 수행되어야 할 요소이다. 어떠한 방법을 택하여 보다 효율적으로 수행할 것 인지가 엔지니어의 관심일 것이다. 구조최적화는 설계변수에 따라 치수최적화, 물성치최적화 형상최적화 등으로 나눌 수 있다. 형상 최적화는 구조물의 유한요소모델을 기본으로 경계의 형상이나 절점의 형상, 회전 등을 설계 변수로 삼는 것이다. 고유진동수를 높이거나 모드형상을 제어하기 위하여 평판에 보강재를 붙이는 경우가 있다. 이때 보강재의 위치나 치수 형상 등이 중요한 변수가 될 수 있다. 본 논문에서는 평판의 고유진동수를 극대화 하기위해 보 보강재를 붙이는 문제에서 보의 회전을 설계 변수로 삼아 최적설계를 수행 할 것이다.