• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.528-536
• /
• 2010

A monopulse feeder gives the most important impact upon the radiation pattern characteristics of a multi-function radar or a tracking radar which uses the space feed. It is described that the triple-mode type monopulse feeder which possesses the optimum aperture illumination for three monopulse channels is designed and measured in this paper. The measured results show that the designed feeder has not only the characteristics of the optimum aperture illimination in each channel and also very low return loss over the 10 % of fractional bandwidth at X-band. This means that the feeder provides the antenna system with low sidelobe level and high monopulse slope characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.71-76
• /
• 2014

In this paper, we proposed the 1-channel monopulse receiver which has the new configuration and described the operation procedures. Also, we compared and analyzed the proposal receiver and the general 3-channel monopulse receiver. As a result, it is apparent that the monopulse ratio of the proposal receiver is equal to that of the 3-channel monopulse receiver. The proposal receiver achieve the simple receiver configuration and the simple tracking procedures, as contrasted with the 3-channel monopulse receiver. Also, the proposal receiver has advantages in terms of size, weight, cost and power. Because the proposal monopulse receiver require 1-channel receiver and need not the signal processor in comparison with 3-channel monopulse receiver which require 3-channel receiver and need the signal processor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.900-908
• /
• 2016

In this paper, we have studied the tracking system with a single channel monopulse receiver that has a comparative advantage of costs, size, weight, and power consumption over the general 3-channel monopulse receivers. After the single channel monopulse system was composed of an antenna, a monopulse receiver, a servo unit, a RF signal processor unit and a power supply unit, we analyzed the basic tracking performance of the tracking error angle and the pointing loss. And we proved the tracking performance to a moving target in the outdoor environment. On the Analysis of the tracking test results, the single channel monopulse system shows a equal or higher performance over the general 3-channel monopulse system and also has advantages of the system implementation. Also, it is concluded that this study is useful to apply a single channel monopulse receiver with benefits of production price and miniaturization when the monopulse tracking systems will be developed in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.22-29
• /
• 2013

The combined structure of both an annular dielectric resonator and a quarter-wave monopole is proposed to generate an omnidirectional radiation pattern over the wideband frequency range. The monopole works at the lower frequency band and excites the cylindrical dielectric resonator along its center point by electrical coupling mechanism. The rectangular shape of the DR is cut to generate the wideband operation of 4.7-18.2 GHz. The geometrical parameter of cylindrical dielectric resonator is 5.8 mm, 11.6 mm and 6.0 mm in inner diameter, outer diameter and height, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.275-278
• /
• 2012

This paper has been studied about implementation of mono-pulse tracking antenna using flat-antenna. Mono-pulse tracking antenna consists of four flat-antenna, comparators, tracking receiver, controller. We analyzed magnitude and phase of radio wave that according to antenna array. In addition, We analyzed output signal of tracking receiver so that we could present the tracking range. Tracking receiver was designed in one path instead of two path of azimuth and elevation in order to minimize the difference occurred in two path. We hadResults of -3~+3degrees of tracking range.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.113.1-113.1
• /
• 2010

본 연구에서는 중 소형 SOFC에 적용할 수 있는 연료 변환 시스템으로 자체 기동 및 독립운전이 가능한 천연가스 자열개질(ATR) 반응기를 $10Nm^3/hr$급으로 개발하고자한다. 설계된 천연가스 자열개질기는 자열개질 촉매를 코팅한 금속 모노리스형 촉매체를 반응기 내에 장착함으로써 반응열을 신속하게 제거 또는 공급할 수 있는 시스템으로 구성되었다. 이는 금속 모노리스의 뛰어난 열전도 능력에 의해 반응기 내의 촉매층 전체 온도 분포를 균일하게 유지할 수 있는 저에너지형 자열개질 반응기이다. 또한 빠른 기동 특성을 실현하기 위하여 전기 발열식 촉매체(EHC ; Electically Heated Catalyst)를 장착한 start-up 시스템을 적용하여 천연가스 자열개질 반응기의 신속한 기동과 장치 간편화를 실현하였으며, 합성 syngas의 배열 회수를 위한 최적 열교환 시스템을 설계/적용함으로써 에너지 효율 향상을 도모하였다. 이와 같은 촉매 및 구조 시스템을 가지는 천연가스 자열개질 반응용 소형 연료변환 시스템을 원통형의 이중관 구조로 구성하고, 독립운전 모드로 개발함으로써 소형 SOFC의 연료 변환장치의 적용에 용이하게 하고자 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2020

This paper summarizes the data of a monopole antenna with a sleeve structure that can be applied in various ways. Sleeve monopole antennas have broadband characteristics and are used for multi-frequency applications. The sleeve monopole antenna is composed of a vertical conductor, which is a radiator, and a sleeve having the same structure as a coaxial cable. The sleeve acts as a radiator and an open stub. The length of the sleeve should be 1/3~2/3 of the total length of the antenna. A monopole antenna having a sleeve structure is applicable to a vehicle wiper antenna. In addition, the case of applying this antenna to a broadband sleeve antenna using a loading coil, a broadband printed sleeve monopole antenna for an ISM band, a gap sleeve and a double sleeve, and a UWB planar monopole antenna using half cutting was summarized and analyzed in terms of structure and broadband.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.3-9
• /
• 2015

In this paper, we propose the operation procedures of the 1-channel monopulse receiver which achieves the new configuration. Also, we analyzed the monopulse ratio and the target angle accuracy of the fabricated receiver by using the monopulse signal generator developed for verifying the proposal equipment. As a result, it is apparent that the monopulse ratio of the proposal receiver is equal to that of the 3-channel monopulse receiver. Also, the fabricated receiver exhibits the target angle accuracy with fewer than 0.1 RMS. The proposal receiver achieves the simple receiver configuration and the simple tracking procedures, as contrasted with the 3-channel monopulse receiver. Also, the proposal receiver has advantages in terms of size, weight, cost and power. Because the proposal monopulse receiver requires 1-channel receiver and needs not the signal processor in comparison with 3-channel monopulse receiver which requires 3-channel receiver and need the signal processor.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.154-161
• /
• 1993

Four kinds of new phosphinate derivatives with a pendant monoazacrown ether were synthesized and their biological activities were tested. These biologically active phosphinates were synthesized in relatively good yields (61∼72%) by one step reactions of phenylphosphinate with aldehyde and monoazacrown ether. Toxicity of these compounds was tested by intraperitoneal injection of the compounds to male mouse and revealed $LD_{50}$ value of 65∼90 mg/kg, which showed enhanced toxicity by attachment of a pendant azacrown ether to a simple phenylphosphinate structure. Although the ring size effect of the pendant crown ethers, (monoaza-15-crown-5 and monoazo-18-crown-6), beening negligible, the identity of the ester functional group in the phosphinate structure exerted sizable influence on toxicity. Thus, phosphinate derivative with octyl or propyl ester group showed somewhat higher toxicity than that with ethyl ester group.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.146-149
• /
• 2018

A monopulse sensor is used to estimate the angle of a target with respect to each received single pulse. It is well known that the cross-eye technique can result in an angle deception effect against monopulse sensors. To verify this effect, we propose a test environment configuration for the angle deception using monopulse receiving antennae and cross-eye transmitters in an anechoic chamber. Using the proposed test environment configuration, we have measured powers of the sum and difference of the signals received by the monopulse receiving antennae when the distance of the two cross-eye transmitters is varied. Finally, the angle deception performance related to the powers of the sum and difference signals was analyzed.