• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.23-27
• /
• 2011

Due to the rapid development of construction technology with effective land utilization in this nation, many tunnels were and are being built across the country. However, the smoke and the heat generated from tunnel fire are the most important critical factors which may results in both massive personal injury and property damage, especially, due to the closed surrounding of the tunnel. Considering this particular nature of the tunnels, this study aims to install a fire detection system using an optic fiber cable to measure the temperature changes, compare, and analyze the resulted values with the times of temperature changes of the sensor by performing fire simulations under the same condition as a real fire test. From the results, it has been found that the temperature sensor detects a fire occurrence and generates an alarm within one minute after ignition for both a real fire test and a fire simulation alike, and also that the characteristics of temperature changes of the sensor has close relations with the speeds of the currents inside the tunnel. In addition, considering the tunnel fires can affect the evacuation efficiency and the fire extinguishing activities of the fire brigade inside the tunnel, the temperature sensor must be able to search and find the locations and directions of the fires correctly.

• Korean Journal of Ornithology
• /
• v.25 no.2
• /
• pp.106-111
• /
• 2018

The Black-tailed gull (Larus crassirostris) is one of the most common gull species in the Northeast Asia and classified as LC (least concern) in the IUCN Red List. The bird has become a useful indicator for marine environmental pollution and habitat disruption, since the human activities impacted marine environments. Here we show that the black-tailed Gull has 6 haplotypes and some rare haplotypes are locally limited implying that the bird may not disperse far. This study may be the first report on population genetic study of Black-tailed Gull in Korea and could be used as the baseline data for monitoring and genetic study on the bird as an environmental indicator.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.402-408
• /
• 2019

Purpose: The study want to verify application the medium expantion foam extinguisher of expantion foam rate and fire extinguishing Performance test because the medium expansion system can maintain the discharge distance less affected by air currents, and the foam agent can be used efficiently. Method: For the study, the medium-expansion testing apparatus was manufactured and with synthetic surfactant foam agent of (class B) fire extinguishing model, and Fire Performance was analyzed for foam expansion rate and the fire agent consumption was measured and analyzed. Results: We measured the medium-spray testing apparatus and found that the expansion rate was 26.1 times. The test results of a 20-unit fire extinguishing model show that the extinguishing time is faster than the high and low foam expansion. It has been analyzed that it is possible to apply a hand-operated with a hose reel or medium expansion apparatus. Conclusion: Considering that the foaming agent and the extinguishing performance of the medium foam ratio are excellent, It is necessary to introduce the technical standards of medium foam agent for the introduction of hand-operated equipment, such as hose reel or portable medium foam apparatus.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.273-275
• /
• 2009

In recent years, many home machines have been developed in order to design and control comfortable interior inside houses. For such task, important factors are temperature, natural and interior lights, and space and control of relative factors each other. This paper presents novel sensor module inside houses, which is designed based on these factors through the PMV (Predicted Mean Vote) standard using information about home state. Moreover, LonWorks based power line communication technique is utilized for control interior lights and air-conditioners by means of wireless remote controllers. This mechanism is systemically operated via intelligent control framework.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.98-107
• /
• 2021

During the sea trial test for the aerovane in AOE-II, a malfunction occurred in the wind detector movement around 40 to 90° on the starboard side and around 270 to 320° on the port side. The purpose of this study was to analyze and improve the cause of the above phenomenon. The wind detector was covered with a mast structure and was not affected directly by the blowing wind, and a vortex air current was formed behind the mast structure, causing the motion malfunction. The above problem was solved by moving and installing the wind detector on the newly installed mast yard. After conducting vibration analysis and reviewing the effects of vibration, the wind detector was installed in the new mast yard and verified by a sea trial test. Since the improvement plan was slightly effective, the position of the wind detector moved away from the mast on the new mast yard and was re-verified through a sea trial test. The movement malfunction of the wind detector did not occur, confirming that it is an appropriate improvement plan.

• Journal of Environmental Science International
• /
• v.32 no.8
• /
• pp.555-561
• /
• 2023

A study is to predict the effective pulsing distance following to the pulsing pressure, nozzle diameter, filtration velocity using numercial analysis techniques and use it as an efficient operation condition and economic data for on-line type pulse air jet bag filter. Filtration area 6 m² condition, calculate filter resistance coefficient for simulation through the primary experiments using coke dust. For CFD simulation, analysis pulsing characteristics about nozzle diameter, filtration velocity and pulsing pressure. The maximum pulsing length of on-line type pulse air jet bag filter, in 10mm nozzle, filtration velocity 1.5m/min and pulsing pressure 5 bar conditions, is 2,285 mm, maximum length is 76.2% of the total filter bag, which is sufficient to pulsing. In 12mm nozzle, pulsing pressure 5 bar and filtration area 1.22 m² conditions, the maximum pulsing length of on-line type pulse air jet bag filter is 1,744~2,952 mm, and the maximum length is 2,952 mm indicates pulsing air can be reached to the bottom of filter bag. When the nozzle diameter is increased 8mm to 10mm, maximum pulsing length is extended 40~47%, and increased 10mm to 12 mm, maximum pulsing length is extended 10~17%. For effective pulsing, over the 5bar of pulsing pressure and larger than 10 mm of nozzle diameter are required.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.42-42
• /
• 2023

최근 IPCC 6차 보고서에서는 전 지구의 온도가 0.5℃가 증가할 때마다 기상학적 가뭄 지역이 증가하며, 인위적 강제력은 가뭄 현상의 강도와 빈도를 증가하는 것으로 밝혔다. 봄철(3월-5월) 동남아시아(남중국, 필리핀 등)에 비해 상대적으로 건조한 동북아시아(동중국, 한반도, 일본) 지역은 가뭄에 취약하며 기후 변화에 따라 가뭄으로 인한 피해가 커질 것으로 전망된다. 그러므로 이 지역은 봄철 가뭄으로 인한 피해를 완화하기 위해 봄철 강수량에 대한 신뢰할 만한 계절적 예보 기술이 꼭 필요하다. 본 연구에서는 1992-2022년 봄철의 Standardized Precipitation Index(SPI) 값을 기준으로 2001년과 2011년 동북아시아 가뭄이 발생한 것을 확인하였으며, 각 해의 3월에 관측된 기상학적 초기 조건으로부터 다중 기후 예보 모델들의 봄철 강수량의 계절적 예측성을 정량적으로 평가하였다. 관측자료로부터 2001년 가뭄은 동북아시아 대기 상층의 저기압성 순환의 강화로 인한 제트류(Jet stream)의 강화와 연관되어 있었으며, 2011년 가뭄은 제트류 강화와 함께 태평양 열대 지역 기류 강화가 동반되어 발생하였음을 알 수 있었다. North American Multi-Model Ensemble 기후 예보 모델들은 2011년 가뭄에 비해 2001년 가뭄에 대한 예측성이 높았으며, 그 이유로는 대기 상층 순환의 예측성과 연관이 있음을 밝혔다. 또한, 봄철 대기-해양 상호 패턴을 관측과 유사하게 재현한 GFDL-SPEARS 모델이 가뭄 해의 대기 상층 저기압성 순환과 강수 예측성이 가장 높은 것을 보였다. 본 연구의 결과들을 통해 동북아시아 봄철 가뭄과 같은 극한 기상의 강수량 예측성 향상에 있어서 기후 예보 모델들의 현실적인 대기-해양 결합 과정 모사 능력의 중요성을 밝혔다. 본 연구에서 제안된 방안들은 기후 예측 모델 개선을 위한 전략적인 정보를 제공할 것으로 보인다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2023

Although Korea is the world's No. 1 semiconductor producing country, most studies are conducted with risk assessment for simple material risks due to the closedness of the site for industrial protection. In terms of industrial safety, a monitoring system such as a gas detector to determine the leakage of hazardous substances has been established, but research on effectively discharging harmful gastritis substances in case of leakage has only recently begun. Semiconductor manufacturing facilities (gas boxes) where a large amount of flammable materials are handled are currently being safety managed by using a gas detector and blocking the air inlet. It is difficult to dilute in a short time in case of leakage of flammable substances. Therefore, in this study, based on various criteria, the size of the duct according to the size of the gas box is determined and the appropriate size of the air inlet is studied to minimize the exhaust performance requirement without exposing hazardous chemicals to the outside in the event of a flammable leak. We want to do an optimal exhaust design.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.47-74
• /
• 2018

The United States is often perceived as a free-trading nation as it significantly contributed to the establishment of the GATT and WTO in the 20th century. With the inauguration of the Trump Administration in 2017, however, trading partners of the United States are faced with great concerns over the 'new' aggressive, protectionist and above all, unilateral trade threats posed by the United States under the name of 'America-First' trade policy. However, the recent unilateral trade actions by the United States are not new, but has historically and continuously been used to protect its key industries, like the automobile sector. This paper analyzes the historical cases of the unilateral trade policy of the United States in the automobile industry, targeting Korea and Japan in the 1980s, 1990s and 2010s. Then, we draw future implications for other key industries of the United States such as IT, intellectual property, services and agricultural sectors. This study evaluates whether such unilateral practices have brought successful and expected outcomes in favor of the United States.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.184-184
• /
• 2021

2020년의 경우 대기 상층 제트기류가 크게 강화됨에 따라 작은 규모의 저기압의 발달이 평년보다 두 배 이상 증가하였고, 그로 인해 장마가 최대 54일가량 지속되며 1조 371억 원 가량의 대규모 침수피해가 발생하였다. 이와 같이 최근 기후변화로 인한 이상 기후가 빈번하게 발생하고 있으며, 그로 인해 홍수, 태풍과 같은 재난의 강도 및 파급되는 재산피해가 점차 증가하고 있는 추세이다. 따라서 본 연구에서는 기후변화를 고려하여 향후 30년간 강우량 변화 추이를 파악하고, 이에 따라 파급되는 재난피해 규모의 증가 추세를 확인하고자 하였다. 기후변화 시나리오는 IPCC AR6(Intergovernmental Panel on Climate Change - Sixth Assessment Report)에서 제시하고 있는 시나리오 중 극한 시나리오인 SSP5-8.5와 안정화 시나리오인 SSP2-4.5 시나리오를 활용하고자 하였다. GCM(General Circulation Model) 자료는 전 지구적 모형으로 공간적 해상도가 낮은 문제가 있기 때문에, 국내 적용을 위해서는 축소기법을 적용해야 한다. 본 연구에서는 공간적 축소를 위해 통계학적 기법 중 인공지능 기법을 적용하고 Reference data와 종관기상관측(ASOS)의 실측 강우 자료(1905 ~ 2014년)를 통해 학습된 모형의 정확도 검증을 수행하였다. 또한 연 강수량과 연도별 홍수피해의 규모 및 빈도를 확인하여 연도별 강수량 증가에 따른 피해 규모의 증가를 관계식을 도출하였다. 이후 최종적인 축소기법으로 모형을 통해 향후 2050년까지 부산광역시의 예측 강우량을 전망하여 연 강수량의 증가량과 피해 규모의 증가량을 전망해보고자 하였다. 본 연구 결과는 부산광역시의 예방단계 재난관리의 일환으로 적응형 기후변화 대책 수립에 기초 자료로써 활용될 수 있을 것이다.