• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.3-3
• /
• 2020

사회-수문시스템의 인과관계에 대한 보다 상세한 통찰하기 위해서는 현재의 사회-수문시스템의 기능을 이해하고 미래의 사회-수문시스템의 변화 궤적을 예상할 수 있는 모형이 필요하다. 사회-수문학적 관점에서는 수문순환 현상과 더불어 인간 활동과 관련된 인구, 토지이용, 경제성, 환경변화로 연계되는 사회-수문시스템 내 복잡한 관계해석 과정이 중요하다. 본 연구에서는 하천유지유량 결정기준에 따른 사회-수문시스템의 변화과정을 이해하고 가능한 영향궤적을 평가하기 위해 사회수문학적 관점으로 해석하고자 한다. 현재 우리나라에서는 하천유량고시지점 114개 중 각 항목별 고시지점의 비율은 수질(33%), 평균갈수량(33%), 생태(29%), 경관(4%), 수질 및 염해(1%)로 나타났다(2019년 고시 현황). 따라서 사회-수문시스템 내에서 하천유지유량 결정기준 차이에 따라 환경적, 사회적, 경제적 측면으로의 영향을 평가하기 위하여 구조방정식모형을 모델링 한 후, 모형 내 잠재요인(기상, 수문, 환경, 사회·경제)의 상호연관성을 파악하였다. 기상학적 요소로는 기온, 강수량을 선정하였으며, 인간의 활동이 개입된 수문학적 요소는 유량, 하천수이용량으로 선정하였다. 환경적 요소는 BOD, COD, SS를 선정하였으며, 사회·경제적 요소는 인구, 지가변동률을 고려하였다. 이와 같은 사회-수문시스템 내 잠재요인별 요소를 바탕으로 사회-수문학적 영향평가를 위한 가설을 검증하기 위해 통계 프로그램 AMOS를 활용하여 구조방정식모형을 모델링하였다. 향후 사회-수문학 관점에서의 복잡한 영향관계를 정량적으로 평가하고, 다양한 이해관계자 간의 합의를 도출하는 데 있어서 효율적인 의사결정도구로 활용될 수 있을 것으로 기대한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.79-93
• /
• 2008

Water quality simulations on the Saemangeum inner reservoir have been carried out using EFDC model to understand water quality variations caused by abrupt physical changes due to closing of tidal barrier. According to hydrodynamic simulation, model reproduces not only outer regional dynamics but also inner superelevation very well. Calibration and verification of water quality models accomplished using observed data taken before closing. Also sensitivity tests regarding riverine discharges and tidal flats were done. Due to enlarging of always wet zone caused by super elevation on inner tidal flats, predicted DO decreases at that region as a result of SOD. Moreover shrink of mixing zone after closing of dike causes deteriorating of water quality showing DO as 2 mg/L during summer at Mangyeong and Dongjin estuaries, however it does not spread to middle part of the reservoir. Vertical stratification occurs after closing and shows vertical differences in DO concentration at least 6 mg/L to 7 mg/L in summer season. Most part of the reservoir is getting stratified and it leads to an oxigen deficit zone near bottom.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.328-333
• /
• 2007

In this paper, we describe characteristics of a movable bridge called the Anjok and propose an improved string model which has delay line controller in physical modeling of the Gayageum. Movable bridge, the Anjok determines the length of vibrating string and transmits the vibration of each string to the body of the Gayageum. We analyze the variations in frequency domain and implement the Anjok model as parametric form using the first-order polynomial fitting in logarithmic scale graph, because the length of string changes fundamental frequency. In order to implement the Anjok model, frequency fitting, tension fitting and frequency fitting using leaky integrator are used. The frequency fitting using leaky integrator has the best results among those. Proposed string model with the Anjok model can represent real tuning system of the real Gayageum and the proposed model could synthesize sounds which is similar to original sounds.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.71-85
• /
• 2012

The purpose of this study is to estimate air purification effectiveness considering the improvement of its methods related atmospheric environment. The air purification effectiveness is estimated in Daegu, one out of Korean Metropolitan cities because air pollution is getting serious in a heavily urbanized area. The absorption of pollutants is calculated by considering spatial heterogeneity that was not considered previous studies and the spatial resolution of air dispersion modeling is also improved by kriging method. According to the type and distribution of urban forest, total 26 kinds of plant communities were distributed with Pinus densiflora community, Pinus densiflora-Quercus mongolica community, Pinus densiflora-Quercus acutissima community and other kinds of communities in the study area. In the results of estimating the $CO_2$ absorption amount for identification of the air purification effectiveness on urban forest, the annual absorption amount was total 108,155t/yr. Also, the annual absorption amounts of $NO_2$ and $SO_2$ were total 183.5 ton and 410.2 ton respectively. The findings from this study can confirm the differences of pollutant absorption by concentration that could not identify if spatial distribution of pollutant concentration had not been considered.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.199-206
• /
• 2014

In this paper, a scheme to evaluate the response variability for functionally graded material (FGM) beam with varying sectional area is presented. The randomness is assumed to appear in a spatial domain along the beam axis in the elastic modulus. The functionally graded material categorized as composite materials, however without the drawbacks of delamination and occurrence of cracks due to abrupt change in material properties between layers in the conventional composite materials. The functionally graded material is produced by the gradual solidification through thickness direction, which endows continuous variation of material properties, which makes this material performs in a smooth way. However, due to difficulties in tailoring the gradients, to have uncertainty in material properties is unavoidable. The elastic modulus at the center section is assumed to be random in the spatial domain along the beam axis. Introducing random variables, defined in terms of stochastic integration, the first and second moments of responses are evaluated. The proposed scheme is verified by using the Monte Carlo simulation based on the random samples generated employing the spectral representation scheme. The response variability as a function of correlation distance, the effects of material and geometrical parameters on the response variability are investigated in detail. The efficiency of the proposed scheme is also addressed by comparing the analysis time of the proposed scheme and MCS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.316-316
• /
• 2020

1970년대 이후 급속한 경제성장과 함께 도시화와 산업구조의 변화로 인간 활동과 밀접한 관계를 맺고 있는 수환경은 크게 훼손되어 왔다. 특히 인간 활동으로 인한 대량 생산과 소비는 하천의 자정작용을 초과하는 오염물질을 배출하고 오염된 하천은 본래 기능을 상실하였으며 각종 생활 오·폐수의 배수구로서의 역할이 부여되어 대부분 복개되기에 이르렀다. 이처럼 현재 우리나라의 하천은 고유의 기능인 용수원으로의 기능과 도시민의 휴식 및 친수공간으로서의 기능을 상실하였으며 중소하천의 건천화에 따른 하천 유지유량의 부족은 하천을 중심으로한 각종 용수의 부족, 수질 오염의 증가, 수변환경 친수기능 상실 등의 문제를 초래하고 있다. 중소하천의 건천화현상은 2000년대 이후 계속 증가, 진행되어 소하천뿐만 아니라 지방하천도 이미 메마르고 있는 상태이며 이로 인한 2차적 비용증가 등 경제적인 측면의 손실도 매년 심해지고 있어 건천화에 대한 원인 규명과 방지책에 대한 연구가 시급한 실정이다. 특히 새만금유역은 농업용수 사용이 많은 유역의 특성상 하천의 건천화 문제가 지적되었으나, 대부분 새만금유역의 용수이용체계 등에 연구가 추진되어 주로 농업용수 이용실태와 수질측정을 위주로 하고 있으며, 건천화의 실태와 원인, 그리고 건천화로 인한 물환경의 영향 등에 대해 조사된 바가 없다. 따라서 본 연구는 만경강유역 하천에 대하여 대조하천, 도시하천, 준도시하천, 농업하천으로 대표지점을 선정하여 현장조사와 유역모델링을 통해 건천화의 원인별 기여율을 파악하였고, 만경강유역의 건천화 규모를 추정하였다. 건천화 원인을 평가하기 위해 유역 내 인위적인 물이용이 없는 상태인 기준유량(자연유량)을 산정하였고, 댐 및 방류량의 영향, 하수처리수 유입에 의한 영향, 수자원이용에 의한 영향, 수리구조물(수자원이용)에 의한 영향의 조건을 고려하였으며 건천화 평가지수를 활용하여 대상하천 소유역의 건천화 현황을 파악하였다. 또한 분석된 결과를 토대로 만경강유역의 토지이용도를 고려하여 만경강유역의 건천화 규모를 추정하였다. 분석결과, 수리구조물(수자원이용)에 의한 영향이 25.5%, 수자원이용에 의한 영향이 13.9%, 방류량에 의한 영향이 12.3%, 하수처리수 유입에 의한 영향이 6.54%로 나타났으며, 수리구조물(수자원 이용)에 의한 영향이 가장 크게 평가되었고, 하수처리수 유입에 의한 영향이 가장 작은 것으로 평가되었다. 이러한 연구결과는 향후 하천의 건천화현상에 대한 원인을 규명하고 방지하기 위한 대책 수립에 필요한 기초자료로 활용이 가능할 것으로 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.397-406
• /
• 2016

Diverse stakeholders engaged in design, construction, and operation and maintenance of offshore plants typically operate heterogeneous plant 3D CAD systems. Engineering, procurement, and construction (EPC) companies are required to submit plant design result to the owner in the form of a plant 3D CAD model, as specified in the contract. However, because of the limitations of data interface of plant 3D CAD systems, EPC companies frequently perform manual remodeling to fulfill the terms and conditions of the contract. Therefore, comparison should be performed between the source plant 3D CAD model and the remodeled plant 3D CAD model to prove the validity of the remodeled plant 3D CAD model. To automate the comparison process, we have developed a system for quantitatively assessing the similarity of the plant 3D CAD models. This paper presents the architecture and detailed functions of the system. In addition, experimental results using this system are explained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.1 s.1
• /
• pp.5-18
• /
• 1999

Recently, the necessity of automatic knowledge extraction from spatial data stored in spatial databases has been increased. Spatial data mining can be defined as the extraction of implicit knowledge, spatial relationships, or other knowledge not explicitly stored in spatial databases. In order to extract useful knowledge from spatial data, an object management system that can store spatial data efficiently, provide very fast indexing & searching mechanisms, and support a distributed computing environment is needed. In this paper, we designed and implemented an open object management system for spatial data mining, that supports efficient management of spatial, aspatial, and knowledge data. In order to develop this system, we used Open OODB that is a widely used object management system. However, the lark of facilities for spatial data mining in Open OODB, we extended it to support spatial data type, dynamic class generation, object-oriented inheritance, spatial index, spatial operations, etc. In addition, for further increasement of interoperability with other spatial database management systems or data mining systems, we adopted international standards such as ODMG 2.0 for data modeling, SDTS(Spatial Data Transfer Standard) for modeling and exchanging spatial data, and OpenGIS Simple Features Specification for CORBA for connecting clients and servers efficiently.