• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.478.2-478.2
• /
• 2003

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.68-71
• /
• 2013

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2657-2662
• /
• 2010

Demand on information security in mobile devices based control system grows rapidly with a view to counteracting information hacking and leakage. Among these techniques, encryption and authentication are most common. This paper presents CBC-MAC (Cipher Block Chaining-Message Authentication Code) based mobile devices control system. The system is termed as Secure Mobile in Vehicle (SMIV)We use CBC-MAC that is one of the most efficient authentication modes to protect information against any malicious attacks. By sharing the secret key of CBC-MAC between the transmitter and receiver, it asserts authentic information. The proposed system is verified in such a way that we develop mobile devices control system, apply the CBC-MAC algorithm to the control system and validate the received data. Unlike conventional systems where the development of control mechanism in mobile devices based control systems is main concern, this proposed system offers a secure communication link of the data in mobile devices control system and therefore would be useful to the design and implementation of various mobile devices based control systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.190-192
• /
• 2021

얼굴 검증 기술은 출입통제 시스템이나 모바일 기기에서의 열람 또는 금융 서비스 등 보안이 요구되는 다양한 분야에서 널리활용되고 있다. 최근 얼굴 검증 분야에서 높은 성능 향상을 보인 대부분의 검증 모델은 깊은 네트워크를 사용하므로 상대적으로 매우 큰 컴퓨팅 파워를 요구한다. 따라서 해당 모델들을 실환경에 적용하기 위해서는 모델 경량화 기술에 대한 고려가 반드시 필요하다. 얼굴 검증 연구에서 경량화 기술의 중요성에도 불구하고 해당 연구는 이제까지 잘 다뤄지지 않았다. 본 논문은 주요 얼굴 검증 모델에 대해서 지식 증류 기술을 수행하고, 이에 따른 실험 결과를 비교 분석하여 제시함으로써 경량화 기술 적용에 대한 방향성을 제시한다.

• Smart Media Journal
• /
• v.7 no.1
• /
• pp.37-44
• /
• 2018

Utilizing sequence control and numerical computing, embedded devices are used in a variety of automated systems, including those at industrial sites, in accordance with their control program. Since embedded devices are used as a control system in corporate industrial complexes, nuclear power plants and public transport infrastructure nowadays, deliberate attacks on them can cause significant economic and social damages. Most attacks aimed at embedded devices are data-coded, code-modulated, and control-programmed. The control programs for industry-automated embedded devices are designed to represent circuit structures, unlike common programming languages, and most industrial automation control programs are designed with a graphical language, LAD, which is difficult to process static analysis. Because of these characteristics, the vulnerability analysis and security related studies for industry automation control programs have only progressed up to the formal verification, real-time monitoring levels. Furthermore, the static analysis of industrial automation control programs, which can detect vulnerabilities in advance and prepare for attacks, stays poorly researched. Therefore, this study suggests a method to present a discussion on an industry automation control program designed to represent the circuit structure to increase the efficiency of static analysis of embedded industrial automation programs. It also proposes a medium term translation technology exploiting LLVM IR to comprehensively analyze the industrial automation control programs of various manufacturers. By using LLVM IR, it is possible to perform integrated analysis on dynamic analysis. In this study, a prototype program that converts to a logical expression type of medium language was developed with regards to the S company's control program in order to verify our method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

An in-cabinet response spectrum should be generated to perform the seismic qualification of devices and instruments mounted inside safety-related electrical equipment installed in nuclear power plants. The response spectrum is available by obtaining accurate seismic responses at the device mounting location of the cabinet. The dynamic behavior of most of electrical equipment may not be easily analyzed due to their complex mass and stiffness distributions. Considering these facts, this study proposes a procedure to estimate the seismic responses of a structure by a combination of a test and subsequent analysis. This technique firstly constructs the modal equations of the structure by using the experiment modal parameters obtained from the impact test. Then the seismic responses of the structure may be calculated by a mode superposition method. A simple steel frame structure was fabricated as a specimen for the validation of the proposed method. The seismic responses of the specimen were estimated by using the proposed technique and compared with the measurements obtained from the shaking table tests. The study results show that it is possible to accurately estimate the seismic response of the structure by using the experimental modal parameters obtained from the impact test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.102-108
• /
• 2003

This paper presents a new Data acquisition system that can improve a accuracy and response characteristics by designing a SDAS(Signal Datat Acquisition System). I&C(Instrumentation and Control) system, which it applied for Nuclear Power Plant, affects for safety either directly or indirectly. It should be assessed by the equipment qualification procedure to confirm the functionality during design life before it apply on the nuclear power plant depending on safety classification. This paper proposes data acquisition system that required as an essential measurement equipment in the method and procedure of equipment qualification following of standards and codes of IEEE and Nuclear Regulatory Guide. It provides comparable and experimental studies have been carried out. The presented results from the above investigation show considerably improved accuracy performance in the data acquisition system. This circuit will be able to be used in high performance I&C system.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.72-78
• /
• 2018

Recent trends in gas safety devices are actively developing and researching wireless gas safety devices in response to the development of wireless technologies and the needs of customers. Although there is controversy over the reliability of wireless, the strength of wireless convenience is increasing the introduction of gas safety devices, a reasonable performance evaluation method is needed to verify the safety and reliability of these devices. This paper amis to propose designing and manufacturing performance assesment equipment and methods for evaluating performance so that the safety and reliability of wireless gas safety devices can be verified and distributed smoothly. So, this study reviews the functions and methods of verifying reliability and safety by investing domestic and foreign the related wireless gas safety devices, produces equipments capable of testing major functions, and presents key performance assessment item and test methods that satisfy the reliability and safety requirements of wireless gas safety devices.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.10-18
• /
• 2009

In this paper, we propose a novel method for authenticating a user's personal-usage using a secure portable storage, so that the user carrying the secure portable storage is able to consume his/her own broadcast programs freely, regardless of the location of the devices. The proposed authentication process is performed by a portable personal-usage authentication device, an access-control module for the portable personal-usage authentication device, and a player integrating the access control module. The portable personal-usage authentication device plays a role of secure storage in which domain authentication information is securely stored, while the access-control module is in charge of accessing the authentication information and, consequently, acquiring a decryption key. The player decrypts the broadcast programs in real time and processes the decrypted media streams. In this Paper, we describe the structure and procedure of the proposed model, and verify its feasibility by implementation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.115-126
• /
• 2022

Under the COVID-19 pandemic, the importance of Official Development Assistance(ODA) in health and medical service is emphasized more. The number of cases is expected to increase in the future. Therefore, it is necessary to provide differentiated education and training for each type of occupation as a follow-up to realize the operations management and maintenance of medical equipment supported by the ODA project. In this study, for an effective follow-up and operations management of medical equipment supported by the ODA project, the differences in educational training achievement between users and maintainers were analyzed through a t-test. As a result of this study, there were significant differences between users and maintainers of medical equipment in use and manage six types of priority management target medical equipment(Q5) and an instruction manual understanding of medical equipment(Q6). However, there was no difference in the need and purpose of education and training, satisfaction with an instructor, and the need for cross-professional communication.