• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.286-286
• /
• 2004

초고속 정보통신망 구현에 필수적인 광학 연결용 부품인 광 Ferrule은 광섬유 커넥터의 중요부품으로서 우수한 치수정밀도와 내마모성을 갖추어야 한다. 현재, Ferrule로 사용되는 재료는 지르코니아, 알루미나 등 세라믹 물질이 많이 사용되고 있으며 기계적 강도나 내마모성 면에서는 우수하지만, 피연마속도가 석영섬유에 비해 현저히 작아서 특수한 연마방법을 채택해야 하며 성형성이나 가공성이 나빠 생산효율이 낮고 비용이 비싸다는 단점을 가지고 있다.(중략)

• IE interfaces
• /
• v.9 no.2
• /
• pp.83-94
• /
• 1996

본 논문에서는 자동차용 전기배선 제조공정 중 절압공정을 대상으로 기계별 작업순서결정에관한 개선된 방법에 관하여 연구한다. 기계별 작업순서에 대하여 작업자들이 현장에서 느끼는 불편한 점들을 개선하려는 목적에서 연구를 진행하였음 개선된 방법을 통하여 자재교환과 치구교환횟수를 감소시킬 수 있었다. 그 결과 기계가동율이 향상되었고 계획된 작업순서에 대한 작업준수율을 높일 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.2926-2935
• /
• 1993

Chip breaker selection analysis, only being possible through experimental process, was obtained by a applied equation which used an orthogonal cutting model and a basic chip deformation. This equation could present an analysis of the chip breaking phenomena without the use of an actual experimetal method, and it was applied to computer simulation and proved the validity of theory through actual experiments. From these results, an efficient method for finding the optimum conditions of chip breaking was found through an optimized theory being applied to basic program. A finite element model for simulating chip breaking in orthogonal cutting was developed and discussed. By simulation the animation of chip breaking is observed in process on the computer screen.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2012

An experimental study was carried out to observe the characteristics of impingement of assist gas from a rectangular supersonic nozzle on kerf surface in laser machining. A micro-scale supersonic (Mach number 2.0) rectangular nozzle system was designed and fabricated for the purposes, and hot tests of the performance of the nozzle system was proceeded in the ITI corporation laboratory. For various related parameters such as laser powers, nozzle pressures and cutting speeds, the quality of the frontal view of cut edge surfaces was observed by a microscope. In the study, it was shown that the application of the present micro-rectangular supersonic nozzle in an off-axis configuration made it possible to cut a mild steel, by combinations of relatively low laser - powers, large standoff distances, and assist gas with no oxygen, which was not achieved by conventional laser cutting processes.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1505-1508
• /
• 2008

One of the important functions of prosthetic foot is the foot inversion-eversion which is so important when walking on uneven surfaces. The aim of our study was to evaluate the effect of foot eversion angle especially on knee and ankle joint for transtibial amputees by motion analysis. The experimental data were collected from three transtibial amputees and then ten healthy individuals. To simulate walking on side sloping ground, we used custom-made slope (5, 10, 15 degrees). Motion analysis was performed by 3-dimensional motion analyzer for 6 dynamic prosthetic feet. The results showed that knee abduction moments of amputated leg were decreased but those of sound leg were mainly increased as foot eversion angle increased. And ankle abduction moments of sound leg were inconsistent in magnitude and tendency between control and experimental group. Therefore foot eversioncharacteristics should be considered to develop advanced prosthetic foot.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1074-1079
• /
• 2003

In this paper, we conducted finite element analysis to investigate the residual stress redistributions of weldment due to cutting. To evaluate the effect of the residual stress on the fatigue behavior of weldment, test specimens are commonly cut from the weldment, but the distributions of the residual stress in the cut specimen should be different from those in the original weldment. Our work is to evaluate the difference between the residual stresses before and after weldment-cutting to understand the effect of cutting on the residual stress. Transient heat analysis, elastic-plastic mechanical analysis and element removal technique are used to simulate the welding and cutting procedures on the commercial finite element code ABAQUS.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.111-117
• /
• 2012

Dust collecting performance of axial-vane type cyclone for oil mist was analyzed in this study. For predicting cut diameter size of cyclone, the number and angle of vane ($tan{{\beta}_2}^{\prime}$) was simulated by CFD. As the result, $tan{{\beta}_2}^{\prime}$ was decreased as the number of vane was increased and the angle of inclination(${{\beta}_2}^{\prime}$) decreased, and it cause strong swirl flow. Therefore, it could be confirmed that as the number of vane was increased and the angle of inclination was decreased, cut diameter size was decreased. Also, by verifying the results of CFD through experiment, the cut diameter size could be $2{\mu}m$ at $4m^3/min$ of flow rate.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.345-350
• /
• 2002

바이오테크놀로지(BT, biotechnology)는 21세기의 첨단과학기술로서 생명공학, 생물공학, 생물이용기술 등으로 불리우고 있으며(일농기학회, 2000), 이 중 실용화되고 있는 기술중의 하나가 식물조직의 배양기술이다(백, 1993), 현재 우리나라에서는 나리, 호접란 등의 우량묘 대량증식을 위하여 조직배양기술을 이용하고 있으나 배양공정의 대부분이 인력에 의존하고 있고 배양묘 생산에 소요되는 비용의 약 60% 정도가 노동비용에서 발생되고 있다(정, 1995). 따라서 배양묘 생산의 여러 과정 중에서 수작업에 의한 작업부분을 로봇 화하여 배양묘 생산비용을 절감하려는 연구개발이 활발히 수행되고 있으며, 이중 주목을 받고 있는 것은 배양기에서 증식된 소식물체의 적출, 절단, 이식과 같은 추후의 증식과정이다 이 공정은 노동집약적일 뿐만 아니라 공정의 수작업에 따른 절단의 불균일성, 품질저하, 조작의 미숙련성, 잡균오염의 위험성 등의 문제점이 로봇화로 해결 가능하기 때문이다. (중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.211-219
• /
• 2017

In this study, we performed numerical simulations on a circulating air classifier using a commercial computational fluid dynamics program. The variations in the grade efficiency, the cut-size and the cut-sharpness were calculated and discussed. By controlling the rotating speed of the main fan, the cut-size could be rapidly increased. However the linearity of the cut-size variation with respect to the main fan speed was not sufficient for application to contaminated soil classification processes. On the other hand, by varying the rotating speed of the classifying fan, the cut-size gradually decreased and could be precisely adjusted. Using both the main fan and the classifying fan, we could achieve larger cut-sharpness values and better classifying performances.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1940-1954
• /
• 1992

Fine grid computations were attempted to analyze the turbulent flows in the near wall low Reynolds number region and the numerical analyses were incorporated by a finite-volume discretization with full find grid system and low Reynolds number k-.epsilon. model was employed in this region. For the improvement of low Reynolds number k-.epsilon. model, modification coefficient of eddy viscosity $f_{\mu}$ was derived as a function of turbulent Reynolds number $R_{+}$ and nondimensional length $y^{+}$ from the concept of two length scales of dissipation rate of turbulent kinetic energy. The modification coefficient $f_{\epsilon}$ in .epsilon. transport equation was also derived theoretically. In the turbulent kinetic energy equation, pressure diffusion term was added in order to consider low Reynolds number region effect. The main characteristics of this low Reynolds number k-.epsilon. model were founded as : (1) In high Reynolds number region, the present model has limiting behavior which approaches to the high Reynolds number model. (2) Present low Reynolds number k-.epsilon. model dose not need additional empirical constants for the transport equations of turbulent kinetic energy and dissipation of turbulent kinetic energy in order to consider wall effect. Present low Reynolds number turbulence model was tested in the pipe flow and obtained improved results in velocity profiles and Reynolds stress distributions compared with those from other k-.epsilon. models.s.s.