• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.1
• /
• pp.9-16
• /
• 2019

Flow velocity changes in the shroud system for tidal current power generation due to experimental flow velocities and blade geometry changes were analyzed by hydraulic experiment and numerical simulation. Through the hydraulic experiment, flow velocities at inlet of shroud system and RPM according to blade geometry were measured, and numerical simulation was used to analyze flow velocity changes in shroud. When the experimental flow velocity was increased by about 28% and the shape of the airfoil was applied, the measured flow velocity at the shroud inlet tended to increase by up to about 56%. On the other hand, when airfoil-shaped blades were installed, the flow velocity at the inlet tended to increase by up to 14% compared to conventional blades, and RPM was also the highest at the same conditions. The hydraulic experiment and numerical simulation results showed an error of about 13%, and the trends of the flow velocity changes in each result are similar. Numerical simulation of the flow velocity changes in the shroud showed that the flow velocity tended to increase 1.7 times at the front of the blade compared to the inlet. The results of the flow velocity change analysis in the shroud system obtained from this study will provide the basic data necessary for the development of efficient shroud system for tidal current power generation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.245-250
• /
• 2010

The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.82-91
• /
• 1997

In this paper, a design method of the boiler-turbine control system in the coal fired power plant is proposed. We need to control electric output and drum pressure and water level in drum to guarantee stable operation and save energy for generating electricity and decrease air pollution in the boiler-turbine system. This boiler-turbine control system is composed of reference model part and model following part. The multivariable boiler-turbine system is separated into 3 SISO(Single Input Single Output) systems applying the concept of relative gain matrix. Each 3 reference models for separated boiler-turbine system are composed of 1st order nominal plant and hysteresis integral control system and they make good dy¬namic response with no overshoot and fast rising time. Each fuzzy controller to follow as close as possible to the response of each reference model is designed. The robustness and the good tracking property can be achieved using 5150 fuzzy controllers when there are modeling errors, disturbances and parameter pertur¬bations. The effectiveness of the proposed design method is verified through simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.465-473
• /
• 2019

This paper is meaningful as the first case where a 4 - sided hull-fixed phased array radar was installed on a mast separated from Korea and the alignment was verified. The mechanical alignment method was studied for accurately mounting two separate masts for naval ships and the 3D scanner for alignment. Hull-fixed phased array radar uses very high frequency, so the short wavelength can cause a phase difference of the device due to the small positional error. Since the array antenna is fixed with the hull, it has higher accuracy control than the rotary radar for 4 array surfaces. The study describes a method of checking the flatness of two radar masts manufactured at a factory, a method of aligning masts in a shipyard, and a method of aligning four array pad mounting surfaces. As a tool for this, a 3D laser scanner and a software-based method for comparing survey results with 3D CAD are used. This paper is meaningful as the first example of installing a four-sided hull-fixed phased array radar on a separate mast from a Korean naval ship and deriving a mechanical alignment method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.553-559
• /
• 2004

The servo motor is used for the driving power source of the conventional linear conveyor system. The mechanical power transfer system is needed for converting the circular to the linear operation. But this system causes some problems of position error, the necessity of the periodical maintenance. In this paper the study on application of transverse flux linear motor(TFLM) is carried out for the indexer system of LCD processing because TFLM has much thrust per a volume than the conventional motor. TFLM is suitable system for the indexer system because of capacity of acceleration, maximum speed and precision of the position, etc.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.501-503
• /
• 2006

최근 산업 분야에서 리니어모터는 고속, 고정밀도의 요구사항에 따라 회전 모터와 볼 스크류, 벨트를 이용한 직선구동방식보다 빠르고 정확하며, 효율이 높기 때문에 활발히 이루어지고 있다. 리니어모터 중에서 선형 브러시리스 직류 전동기(LBLDCM)는 다른 리니어모터에 비해 소형, 경량이 가능하고, 저속 및 고속의 운전이 용이하며, 기계 가공 정도보다는 엔코더 등과 같은 위치 결정 응용 분야에 적합하며 본 연구에서 사용된 LBLDCM은 코일 가동형으로 영구 자석에 의해 발생된 자계와 가동자 코일에 흐르는 전류 사이에 작용하는 힘을 이용하게 된다. 이와 같은 LBLDCM을 응용분야에 적용하기 위해서는 구동 중에 속도가 변하는 지점에서 발생하는 진동을 줄여야 하며 목표지점까지의 정확한 위치 제어가 필수적이다. 따라서, 본 연구에서는 다양한 속도 프로파일에 따른 진동에 대해 비교 분석한 후, 이동거리에 따른 적합한 속도 프로파일에 대해 알아보았고, 그 결과를 토대로, 목표지점까지의 위치 오차를 저감하면서 정밀한 위치 제어에 적합한 프로파일을 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.2
• /
• pp.1-9
• /
• 2003

We develop an experimental system to inspect a metal mask and, in this paper, introduce its inspection algorithm. This system is composed of an ASC(Area Scan Camera) and a belt type xy-table. The whole area of the metal mask is divided into several inspection blocks. The area of each block is equal to FOV(Field of View). For each block, the camera image is compared to the reference image. The reference image is made by gerber file. The rotation angle of the metal mask is calculated through the linear equation that is substituted two end points of horizontal boundary of a specific hole in a camera image. To calculate the position error caused by the belt type xy-table, HT(Hough-Transform) using distances among the holes in two images is used. The center of the reference image is moved as much as the calculated Position error to be coincided with the camera image. The information of holes in each image, such as centroid, size, width and height, are calculated through labeling. Whether a holes is mado correctly by laser machine or not, is judged by comparing the centroid and the size of hole in each image. Finally, we build the experimental system and apply this algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1757-1763
• /
• 2010

Flywheel energy storage system (FESS) is defined as a high speed rotating flywheel system that can save surplus electric power. The FESS is proposed as an efficient energy storage system because it can accumulate a large amount of energy when it is operated at a high rotating speed and no mechanical problems are encountered. The FESS consists of a shaft, flywheel, motor/generator, bearings, and case. It is difficult to simulate rotor dynamics using common structure simulation programs because these programs are based on the 3D model and complex input rotating conditions. Therefore, in this paper, a program for the FESS based on the 2D FEM was developed. The 2D FEM can model easier than 3D, and it can present the multi-layer rotor with different material each other. Stiffness changing of the shaft caused by shrink fitting of the hub can be inputted to get clear solving results. The results obtained using the program were compared with those obtained using the common programs to determine any errors.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.96-96
• /
• 2017

농산물 수확 이후 저장 유통 과정에서 일어나는 생리적 현상 변화에 따른 내부품질의 측정 분석연구가 활발히 진행되고 있다. 이 연구에서는 비파괴 측정 방법들 중 하나인 자기공명영상(Magnetic Resonance Imaging, MRI) 기술을 활용하여 후숙 과일인 키위의 저장 일수에 따른 형태 및 내부 구조의 변화를 조사하였다. 공시재료는 국내에서 판매되고 있는 키위들 중 3품종(뉴질랜드산 Sun Gold, 뉴질랜드산 Green, 칠레산 Jin Green)별로 균일한 크기의 과일 5개씩을 이용하였으며, 시료를 실험실내($16.6^{\circ}C$, 38% RH)에서 18~19 일간 보관하면서 3~5일 간격으로 5회 시험하였다. 전북대 농업과학기술연구소가 보유하고 있는 MRI(M10, Aspect Imaging, Israel)를 활용하여 영상 이미지를 얻었으며, 저장 기간에 따른 무게 감소는 전자저울(한성, HK-series)을 이용하였다. 자기공명영상 이미지는 Gradient-Eco 펄스열을 사용하였고, 횡단면(Axial)의 영상면(Image-direction)을 중심으로 영상영역(Field of View, FOV)은 $80mm{\times}80mm$로 1회 촬영 할 때 마다 30개의 영상들을 얻었다. 저장 기간이 길어질수록 내부 공동현상이 커지는 것으로 나타났고, 뉴질랜드산 Sun Gold 품종은 다른 두 품종보다 내부 공동이 빠르게 나타났다. 실험이 끝나는 날에는 껍질이 연화되어 타원형의 형체를 계속 유지하지 못하고 붕괴되는 이미지를 MRI를 통해서 관찰 할 수 있었다. 시간이 지남에 따라 영상들의 위치가 일정하지 않고 일부 회전을 한 것처럼 나타났다. 이는 키위 전용 홀더를 만들어 고정하지 않고 측정하다보니 생긴 오차로 생각 되었다. 키위를 건조한 공간에 오래 보관하였기 때문에 시간이 지남에 따라 수분증발과 연화된 껍질 사이로 과육이 흘러 일부를 제외한 대부분의 키위 무게가 일정하게 감소하는 것을 알 수 있었다.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.175-181
• /
• 1993

Radiosurgery requires integral procedure where special devices and computer systems are needed for localization, dose planning and treatment. The aim of this work is to verify the overall mechanical accuracy of our LINAC and develop dose calculation algorithm for LINAC radiosurgery. The alignment of treatment machine and the performance testing of the entire system were extensively carried out and the basic data such as percent depth dose, off-axis ratio and output factor were measured. A three dimensional treatment planning system for stereotactic radiosurgery has been developed. We used an IBM personal computer with C programming language (IBM personal system/2, Model 80386, IBM Co., USA) for calculating the dose distribution. As a result, deviations at isocenter on gantry and table rotation for our treatment machine were acceptable since they were less than 2 mm. According to the phantom experiments, the focusing isocenter were successful by the error of less than 2 mm. Finally, the mechanical accuracy of our three dimensional planning system was confirmed by film dosimetry in sphere phantom.