• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.431-440
• /
• 2011

The thermal expansion coefficient of epoxy/inorganic additives composites was controlled by changing the amount of the inorganic additives such as talc and fused silica. The epoxy resin comprises hydrogenated bisphenol A (HBA)-based epoxide, difunctional polyglycidyl epoxide (DPE) as a diluent and isophorone-diamine (IPDA) as a crosslinking agent, which was subsequently mixed with inorganic additives (talc and fused silica). The thermal expansion coefficient was decreased by increasing amount of inorganic additives, nearly to fresh granite. Fused silica was more effective than talc in lowering the thermal expansion coefficient. Additionally, lexural and tensile strengths of the composites were getting lower and higher with the amount of the inorganic fillers, respectively. It was thus concluded that an epoxy composite containing inorganic fillers was developed to show much lower thermal expansion coefficient, similar to fresh granite, than the neat epoxy resin, and also proper mechanical strengths for applications.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.944-953
• /
• 2021

Lignin is a complex phenylpropanoid polymer abundant in the cell walls of vascular plants. It is mainly presented in conducting and supporting tissues, assisting in water transport and mechanical strength. Lignification is also utilized as a defense mechanism against pathogen infection or wounding to protect plant tissues. The monolignol precursors of lignin are synthesized by cinnamyl alcohol dehydrogenase (CAD). CAD catalyzes cinnamaldehydes to cinnamyl alcohols, such as p-coumaryl, coniferyl, and sinapyl alcohols. CAD exists as a multigenic family in angiosperms, and CAD isoforms with different functions have been identified in different plant species. Multiple isoforms of CAD genes are differentially expressed during development and upon environmental cues. CAD enzymes having different functions have been found so far, showing that one of its isoforms may be involved in developmental lignification, whereas others may affect the composition of defensive lignins and other wall-bound phenolics. Substrate specificity appears differently depending on the CAD isoform, which contributes to revealing the biochemical properties of CAD proteins that regulate lignin synthesis. In this review, details regarding the expression and regulation of the CAD family in lignin biosynthesis are discussed. The isoforms of the CAD multigenic family have complex genetic regulation, and the signaling pathway and stress responses of plant development are closely linked. The synthesis of monolignol by CAD genes is likely to be regulated by development and environmental cues as well.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.419-432
• /
• 2010

Various torque generating devices have been developed and employed to apply a proper torque. These devices are usually calibrated by the manufacturer to apply appropriate torque levels for their specific implants and attachments. The purpose of this investigation was to determine and compare the accuracy of the torque controllers. In this study, 4 types of torque controllers were used; torque limiting device(TLD), torque indicating device(TID) and contra angle torque driver(CA), electronic torque controller(ETC). Digital torque gauge was employed to measure the de-torque value. Thirty cycles of tightening and loosening were repeated with each torque controller. All implant torque controllers have shown slight errors and deviations. The contra angle torque driver exhibited the most accurate data. In the limitation of this study, it would be recommended that the implant torque controllers should be checked whether uniformed and precise torque can be generated and a measuring error should be corrected.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.67-70
• /
• 1998

지방족 폴리에스테르계 고분자인 Poly(lactic acid)(PLA)는 생분해성, 생체적합성, 분해물의 비독성, 가공성 등이 우수하여 부러진 뼈의 접합 재료, 약물 조절 방출 재료 및 흡수성 봉합사 등과 같은 의료용 소재로 널리 이용되고 있다[1]. 그러나 PLA는 높은 결정화도로 인해 물성이 brittle하고 분해속도가 느릴 뿐만 아니라 낮은 열 안정성으로 인해 용융 가공할 경우 급격한 분자량의 감소를 유발하여 기계적 특성이 좋지 않은 단점이 있다.(중략)

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.46-49
• /
• 2001

EMV(electromagnetic valve) 시스템은 자동차에서 기계식 캠을 사용하지 않고 전자기력을 이용하여 흡 배기 밸브를 작동시키고 타이밍을 조절하기 위한 것이다. 본 논문에서는 EMV 시스템을 위한 전자기와 기계적 모델을 사용하여 그에 대한 동역학 모델을 유도하였다. EMV 시스템의 최대 동작주파수가 가솔린엔진의 최대 회전수 6000rpm에 대응한 valve의 주파수가 50Hz 되기 위한 제어기를 설계하였고, 실험을 통하여 문제점들을 파악하고자 한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.28-28
• /
• 1994

세라믹 분림가은 세라믹 고유의 열적, 기계적 특성으로 인해 유기질막이 사용되어질 수 없는 작업환경에서도 사용가능하다는 장점이 있다. 기존의 세라믹 분리막 제조방법으로는 졸겔법등이 있는데, 최근들어 새롭게 주목받고 있는 것이 화학기상중착법 (chemical vapor deposition)에 의한 제조이다. CVD 법은 막의 두께를 비교적 정확하게 조절할 수 있고, 균일한 두께의 막을 제조할 수 있다는 장점이 있다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.78-81
• /
• 2004

막을 이용한 기체분리의 경우 높은 투과도와 높은 선택도를 얻는 것은 매우 중요하면서도 어려운 일이다. 일반적으로 투과도가 높아지면 선택도가 낮아지고 선택도가 높아지면 투과도가 낮아지는 거동을 보인다. 이 두 가지의 특성을 적절히 조절하여 최적화하기 위하여 막은 기계적 강도를 높이기 위한 다공성의 지지층과 실질적인 분리가 일어나는 얇은 선택 층으로 구성된 복합막의 형태로 제조된다.(중략)

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2280-2282
• /
• 2001

EMV(electromagnetic valve) 시스템은 자동차에서 기계식 캠을 사용하지 않고 전자기력을 이용하여 흡·배기 밸브를 작동시키고 타이밍을 조절하기 위한 것이다. 본 논문에서는 EMV 시스템을 위한 전자기와 기계적 모델을 사용하여 그에 대한 동역학 모델을 유도하였다. EMV 시스템의 최대 동작주파수가 가솔린 엔진의 최대 회전수 6000rpm에 대응한 valve의 주파수가 50Hz 되기 위한 제어기를 설계하였고, 실험을 통하여 문제점들을 파악하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.33-34
• /
• 2007

카본과 BN의 합성조건을 제어하여 고경도 상과 저경도 상을 다층박막화하기 위하여 시편에 인가하는 바이어스 전압을 조절하여 박막을 합성하였다. 합성된 다층박막은 카본의 경우 흑연상을 많이 함유한 단일층 박막과 유사한 경도와 탄성계수를 보였으나 마찰계수는 $2{\sim}3$배 개선되었다. BN의 경우에도 2층박막화된 박막에서 FTIR분석 결과로는 50%이상의 c-BN이 합성된 것으로 나타났으며, 마모특성도 c-BN박막과 유사하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.341-349
• /
• 1996

To improve the dyeability of polyurethane (PU) resin, low molecular weight diols containing dye site in the molecular structure was added as a chain-extender. PU resin were synthesized with the variations in the chain extender, polyol type, and hard segment/soft segment (HS/SS) ratio. When HS/SS ratio is 1.4 and dimethylolpropionic acid(DMPA) or N-butyldiethanolamine (BDEA) was used as a chain extender, because of heterogeneity of reaction mechanical properties were diminished. But when N-methyldiethanolamine (MDEA) was used as a DCE, and HS/SS ratio lowed to 1.3, mechanical properties and dyeability improved. In particular, when linear type 1,4-BD was formulated with MDEA, hydrolysis resistance and mechanical properties of PTMG type PU was improved. And initial elasticity, tensile strength and elongation could be controlled by the variation of HS/SS ratio, DCE mixing ratio of 1,6-HD or NPG.