• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.111-111
• /
• 2018

ASTM A387-Gr.91 강은 우수한 고온 강도, 크리이프 저항성 그리고 내산화성 등으로 인해 화력 및 바이오매스 발전 시설과 같은 고온 설비의 구조재료로 널리 사용되고 있다. 고온 환경에서 높은 강도는 탄화물과 탄질화물에 의한 석출강화가 주 요인으로 작용한다. 열처리 과정에서 Mo, Cr, Mn, 그리고 Fe는 구-오스테나이트 및 마르텐사이트 라스 입계에 $M_{23}C_6$ 탄화물로 석출되며, V, Nb, 및 N은 조직 내부에 미세한 MX 탄질화물로 석출된다. 따라서 합금의 고온 강도는 조직 내 석출물의 개수밀도와 크기에 크게 의존한다. 그러나 적용 환경의 특성 상 고온 노출에 따른 2차상 석출 및 조대화의 조직열화 현상이 발생하며, 이는 재료의 강도를 저하시킨다. 본 연구에서는 ASTM A387-Gr.91 강의 미세조직 열화에 따른 강도저하 및 파괴 양상을 고찰하는데 그 목적을 두었다. 본 연구에서 사용된 ASTM A387-Gr.91 강의 화학성분(wt, %)은 0.1 C, 0.38 Si, 0.46 Mn, 0.25 Ni, 8.38 Cr, 0.93 Mo, 0.18 V, 0.09 Nb, 그리고 나머지는 Fe 이다. 조직열화 및 기계적 강도저하 특성을 평가하기 위한 등온열화는 $650^{\circ}C$의 대기 환경에서 최대 1000시간동안 실시하였다. 열화된 시험편의 미세조직 및 탄화물에 대한 분석은 SEM과 EDS를 이용하여 실시하였다. 그리고 기계적 강도 평가는 인장실험과 비커스 경도시험을 통해 실시하였다. 또한 열화 시간에 따른 파단양상의 변화를 관찰하기 위해 인장시험편의 파단면을 SEM과 EDS를 이용하여 분석하였다. 그 결과, 열화에 따른 마르텐사이트 라스의 소실, 탄화물의 조대화, 그리고 2차상 석출의 조직 열화현상이 나타났다. 또한 기계적 강도는 조직 열화에 따라 저하되는 경향을 나타냈다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.167-172
• /
• 2007

Since 1990s, these many researchers have been fully involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. the first is "Mechanical recycling" which involves shredding and grinding of the scrap FRP in a new product. Despite of the safety hazards, mechanical recycling is one of the simpler and more technically proven methods. Recent researchers should be more interested in these methods. It is fact that most of FRP wastes are depended on incineration or reclamation. Because it Is made up of reinforced fiber glass, it is very difficult to break into pieces. By the disposing of waste FRP this way, it also occurs secondary problem such as air pollution and unacceptable noise. This study is to propose a new method which is efficient and environment friendly waste FRP regenerating.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.26-29
• /
• 2007

Fe-based powders, Fe-M(M=Cr, Mn, Cu, Zn), were prepared in Ar gas by mechanical alloying and their crystallographic and magnetic properties were investigated. X-ray diffraction indicates that the cubic lattice parameter increases for the M substitution. The distance of closest approach around M can explained the increase of lattice constant in Fe-M powders. $M\"{o}ssbauer$ spectroscopy measurements on Fe-M samples indicates the coexistence of ferromagnetic phases and paramagnetic phase that are created by the distribution of local environment M on Fe atom. On the other hand, The spread of line-width on $M\"{o}ssbauer$ spectra can be explained by the distribution of hyperfine magnetic fields. The results of quadrupole shift and isomer shift revealed that M substitutions in Fe-M powders didn't change both structure and the local charge distribution around Fe atom severely.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.721-727
• /
• 2000

The electrolytic plating of a metallic nickel on carbon fiber surfaces was carried out to improve mechanical interfacial properties of carbon fiber/epoxy resin composites. The surface characteristics of carbon fibers and the mechanical interfacial properties of final composites were characterized by X-ray photoelectron spectroscopy (XPS) and interlaminar shear strength (ILSS), respectively. It was found that the electrolytic Ni-plating conditions significantly affected the degree of adhesion at interfaces between carbon fibers and epoxy resin matrix in a composite system. Especially, the increase of O,$_{1s}$/$C_{1s}$ ratio, production of NiO groups, and formation of metallic nickel on the nickel-plated carbon fiber surfaces led to an increase of the ILSS of the composites. Also, the ILSS of the composites was greatly correlated with the $O_{1s}$/$C_{1s}$ ratio of the carbon fibers treated in this work.is work.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.573-578
• /
• 2012

In general, most physical properties of wood/polyvinyl chloride (PVC) composites are lower than those of corresponding neat PVC resin because of poor interfacial adhesion between the hydrophilic wood flour and hydrophobic PVC. Therefore, in this study, we treated wood flour with three aminosilanes to improve wood/PVC interfacial adhesion strength, and eco-friendly wood/PVC/nanoclay composites were prepared by melt blending the aminosilane-treated wood flour, a heavy metal free PVC compound, and a type of nanoclay. The effects of treating wood flour with the aminosilanes and adding the nanoclay on the mechanical properties of the composites were investigated. Mechanical properties of the composites were investigated by universal testing machine (UTM), izod impact tester, dynamic mechanical analyzer (DMA), and thermomechanical analyzer (TMA). The tensile properties of the composites with the aminosilane-treated wood flour were considerably higher than those of the composites with neat wood flour. Furthermore, a small amount of the nanoclay improved mechanical properties of the composites. The performance of the wood/PVC composites was considerably improved by using the aminosilane-treated wood flour and the nanoclay.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.53-59
• /
• 1995

Effects of sintering additives and sintering temperatures on the sintering behavior and mechanical properties of SiC whisker reinforced alumina composites have been investigated in this study. Dense (>95% TD) composites were obtained by using 2 wt% $Y_2O_3$ as liquid phase sintering additive. But only porous composite could be obtained when the sintering additives were MgO and $TiO_2$, which were known as the sintering additives for solid state sintering of alumina. Bending strength and fracture toughness were enhanced by reinforcement of SiC whisker. It is belived from the microstructure investigation that the enhanced by strength and toughness could be attribute to the reinforcing and grain growth inhibition effects of SiC whisker. After HIP treatment, fully dense composites were obtained and further enhanced mechanical properties achieved.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.191-199
• /
• 2015

In order to improve the low impact resistance of polystyrene without harming its transparency the styrene monomer was copolymerized with transparent butyl acrylate (BA), and methylmethacrylate (MMA) to obtained a poly(styrene-co-butylacrylate) P(SM-co-BA) and a terpolymer copolymer P(SM-co-BA-co-MMA). The polymers were then cross-linked with the aid of a cross-linking agent dicumylperoxide (DCP), and their mechanical and optical properties were tested. It was found that the contents of monomers and DCP affect the mechanical, thermal, and optical properties of the polymers. An increase in BA contents in P(SM-co-BA) and P(SM-BA-MMA) improved the mechanical strength, but the optical properties remained the same with some exception for P(SM-co-BA). An increase in the DCP contents improved the mechanical but found losses in the optical properties.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.78-83
• /
• 2014

Recently, a rapid growth of wind power system as a leading renewable energy source has compelled a number of companies to develop intelligent monitoring and diagnostic system. Such systems can detect early mechanical faults, which prevents from costly repairs. Generally, fault diagnostic system for wind turbines is based on vibration and process signal analysis. In this work, different type of mechanical faults such as mass unbalance and shaft misalignment which can always happen in wind turbine system is considered. The proposed intelligent fault diagnostic algorithm utilizes artificial neural network and Wavelet transform. In order to verify the feasibility of the proposed algorithm, mechanical fault generation experimental system manufactured by Gaon corporation is utilized.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.45-53
• /
• 2015

There are few studies on the effects of different sources of PVC scraps generated after the end-of-life PVC products and these scraps are used to prepare PVC products of low quality. In this paper, rigid PVC scraps from different sources such as clothes, pipes, and others were investigated to incorporate into virgin PVC compounds as a part of efforts to recycle various PVC scraps effectively. It was found that the tensile strength and impact strength of the PVC compounds generally decreased with increasing the content of PVC scraps. The impact properties of scrap were in order of CC > PC > RC, tensile strength were PC > CC > RC and Vicat softening temperature shows no specific tendency. CC scraps contents of 50 phr of virgin PVC resin showed 80 %, and PC scrap with 50 phr of virgin resin showed 50% of the mechanical properties with virgin PVC.

• Composites Research
• /
• v.33 no.4
• /
• pp.213-219
• /
• 2020

Recently, global facing environmental issues have been raised caused by plastic waste. Hence, increasing the demand for interest in environmentally friendly materials. In this row, research on engineering composite materials also replacing the synthetic reinforcement by introducing natural fibers. However, focus on the strength and interfacial adhesion between matrix and reinforcement is very essential in natural fiber composite, which is insufficient in the literature. There are number of approaches for improving the mechanical strength of the composites, one of the common methods is to reinforce additive nanoparticles. The present investigation, bio-additives were synthesized utilizing bio-waste, cheap, bio-degradable sea-weed powder that could replace expensive nanomaterials and reinforced into the CFRP composite through Hand lay-up followed by a vacuum process. Mechanical properties were evaluated and analyzed through microanalysis. The results concluded that synthesized additives are effective for improving mechanical properties such as tensile, flexural, impact, and shear strength. Overall, the results confirmed that the fabricated composites have potential applications in the field of engineering applications.