• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.564-566
• /
• 2012

In this paper, a design method for a compact broadband planar monopole antenna fed by coplanar waveguide (CPW) is studied. The proposed broadband monopole is optimized for terrestrial digital television (DTV) receiving. The monopole is fed by a CPW with 75-ohm characteristic impedance on an FR4 substrate and its size is $100mm{\times}200mm$. A pair of slit is appended for size reduction and an inductive stub is loaded for the impedance matching between the feedline and monopole. The optimized monopole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.573-576
• /
• 2012

We have analyzed the induction effects by separation distance between the power feeding station and the telecommunication cables. To do this we measured the induced voltage in 11 sections(10km) between Jangseong and Imgok at Jeon-nam province using telecommunication cable installed nearby KTX's feeder line. Sub-section has about 1km length of telecommunication cable. And we used normalization method in installed length of telecommunication cables and mutual inductance to analysis the induction effects more rationally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.895-900
• /
• 2001

본 논문에서는 하나의 급전선을 갖는 원형 섹터 마이크로스트립 안테나를 사용하여 서로 수직한 편파 특성을 갖는 이중주파수 안테나를 설계하였다. 여기되는 모드 및 주파수를 공진기 모델을 사용하여 계산하였으며, 반경과 섹터 각도를 파라미터로 하여 여기되는 두 주파수를 설계할 수 있었다. 약 2GHz 대역에서 동작하는 안테나를 제작하여 안테나의 특성을 측정하였다. 안테나의 반경을 고정하고 섹터 각도를 75$^{\circ}$에서 120$^{\circ}$까지 변화시켜, 여기되는 두 주파수의 비가 1.08에서 1.518까지 변하는 것을 볼 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1261-1262
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1263-1264
• /
• 2012

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.302-305
• /
• 2003

In this paper, a feedline which is a shape of a fork is designed to improve a bandwidth of the microstrip slot antenna. To determine design parameters of the feedline, the characteristics of the microstrip slot antenna is analyzed by changing design parameters of the feedline. The microstrip slot antenna with the feedline of a shape of a fork has a wide band, from 1.7 GHz to 6.1 GHz for VSWR $\leq$2.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1474-1479
• /
• 2004

In electrification of the Honam line, the grounding method of the copper wire shield of 66kV feeder cable was disputed. This paper describes that the review of the proper earthing method(one-side earthing or both-side earthing) under consideration of the site condition and the acceptability of the induction voltage of the shield on the end of the cable.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1393-1395
• /
• 2000

본 논문에서는 최근 선진국에서 활발히 연구되는 EMF 차폐 대책의 일환인 수동루프에 대한 이론적 분석 방법을 제시하고, 고속철도 급전선 주변에서의 자계 저감효과를 보이고자 한다. 그 결과 수동루프를 이용하여 자계 저감효과를 확실하게 나타낼 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1492-1497
• /
• 2017

In this paper, a design method for a CPW-fed wideband loop antenna for indoor digital TV applications is studied. The proposed loop antenna consists of a square loop and two circular sectors which connect the loop with central feed points, and the CPW feed line is inserted in the lower circular sector. The CPW feed line is designed to match with the 75 ohm port impedance for DTV applications, and the ground slots are etched in order to improve the impedance matching in the middle frequency region. The effects of the gap between the circular sectors and the location and dimension of the ground slots on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized antenna is fabricated on FR4 substrate, and the experiment results show that it operates in the frequency band of 463-1,280 MHz for a VSWR < 2, which assures the operation in the DTV band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.461-466
• /
• 2019

In this paper, we have studied the improvement of gain and bandwidth characteristics by using double feeding and L-shaped inset feed line matching circuit in microstrip stacked patch antenna which is widely used to broaden the gain of general microstrip antenna. The proposed structure is composed of two feeding edges of the main patch antenna, each of them are connected to a feeding line having an L shaped inset feeder. And the parasitic patch is placed at a proper distance above the main patch. The size of the main patch is designed so that the resonance frequency is close to the center frequency of the target frequency band. The experimental results show that the bandwidth was increased more than 180MHz in the 2.3-2.7 GHz band, which is more interesting than the single feed, and the gain improvement of 2.5dBi was obtained at 2.7GHz.