• Title/Summary/Keyword: 급수배관

Search Result 62, Processing Time 0.022 seconds

Investigation on Design Requirements of Feed Water Drain and Hydrogen Vent Systems for the Prototype Generation IV Sodium Cooled Fast Reactor (소듐냉각고속로 원형로 소듐-물 반응 압력완화계통의 급수배출 및 수소방출 설계 요건 연구)

  • Park, Sun Hee;Ye, Huee-Youl;Lee, Tae-Ho
    • Korean Chemical Engineering Research
    • /
    • v.55 no.2
    • /
    • pp.170-179
    • /
    • 2017
  • We investigated design requirements of feed water drain and hydrogen vent systems for the sodium-water reaction pressure relief system (SWRPRS) of the prototype generation IV sodium cooled fast reactor (PGSFR). We evaluated the areas of the gas vent pipe of the water dump tank and the length of the water drain pipe of the steam generator to rapid drain of the water steam inside the steam generator for the normal and refueling operations, respectively. We also calculated the diameter of the gas vent pipe of the sodium dump tank which met its design pressure.

배관 세척장치의 성능평가

  • 조정식
    • 월간 기계설비
    • /
    • s.119
    • /
    • pp.71-83
    • /
    • 2000
  • 점차 복잡해지고 있는 사회적 욕구를 만족시키기 위한 건물에서는 반드시 복잡한 설비가 요구되고 있고, 이러한 설비시스템 중에는 급수, 급탕 및 배수설비라고 하는 배관시스템이 없다면 기능유지에 막대한 지장을 초래할 것은 자명하다고 하겠다. 이러한 배관시스템에서는 항시 또는 일부 사용되어질 물이나 사용된 물이 흐르기 때문에 배관내부에 발생하는 스케일(scale)이나 슬라임(slime) 등은 피할 수 없는 사실인 것이다. 건축물 내에 설치된 각종 배관은 건물의 기능을 유지하고 보건위생과 직결되는 중요한 기능을 담당하고 있어 세척의 필요성이 매우 높음에도 불구하고 배관의 수명이 다할 때까지 거의 세척이 이루어지지 않고 사용되어 왔다. 이들 배관에 대한 세척은 배관의 수명연장과 관마찰 계수를 낮추어 급수의 수송동력을 절감할 수 있고, 난방관의 열전달 효과를 높여 에너지 절약 효과를 거두어 건물의 유지관리 비용 절감에 기여할 수 있음에도 적절한 세척공법이 개발되지 않고 있다. 이러한 관점에 맞추어 건물배관의 특성에 맞도록 고압 세척장치를 개발하고 이를 이용한 세척공법을 적용하고자 하였다. 즉, 배관 내에 압축공기를 주기적으로 분사하여 맥동현상이 일어나도록 하면서 기포를 발생시켜 기포가 관의 내벽에서 성장하여 파괴될 때 관내에 부착된 이물질을 제거할 수 있고, 또한 세척효과를 높이기 위하여 관의 벽면에 접촉하면서 배출되는 과정에서 이물질을 제거할 수 있도록 구조와 아울러 이들 장치를 이용한 세척방법의 적용성에 대해서 고찰하고자 한다.

  • PDF

Unsteady Thermal Stratified Flow and Heat Transfer in a Horizontal Feedwater Pipe (수평급수배관 내에서의 비정상 열성층유동 및 열전달)

  • Yeom, Hak-Gi;Park, Man-Heung
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.20 no.2
    • /
    • pp.680-688
    • /
    • 1996
  • In this paper, the unsteady state calculational model is proposed for the thermal stratification analysis in the feedwater line of the PWR plant. By defining dimensionless parameters in the two-dimensional polar coordinate system and applying SIMPLE algorithm, the temperature and flow profiles due to the thermal stratification are obtained. Base on the fact that the most significant condition occurs when the fluid temperature difference between the piping ends reaches as high as 166.deg. C, the present result shows that max. Dimensionless temperature difference of 0.6 (about l00.deg. C) obtained between hot and cold sections of pipe wall at dimensionless time 47.0.

A Comparison of the Design Loads of a Water Supply System (급수배관에서의 순간최대 급수량의 산정에 대한 비교 연구)

  • Lee, Yong-Hwa
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.26 no.1
    • /
    • pp.38-41
    • /
    • 2014
  • Fixture units and the diversity curve are used, in order to determine the required size of water supply pipe. However, the values of the National Plumbing Code, International Plumbing Code and National Standard Plumbing Code of America are not the same. The objective of this study is to comparatively analyze the fixture units and the peak flows of a 10th story office building, at any instant of time, according to the three codes.

수처리 선진화 사업-옥내급수관 갱생으로 녹물 제거

  • Korea Mechanical Construction Contractors Association
    • 월간 기계설비
    • /
    • no.12 s.209
    • /
    • pp.34-43
    • /
    • 2007
  • 환경부는 산하 수처리선진화사업단에서 수돗물 수질개선대책의 일환으로 연구개발한 옥내급수관 진단, 세척 및 갱생기술을 적용, 서울시와 공동으로 시범사업을 실시한다고 밝혔다. 이 사업은 서울 둔촌동 주공아파트 2개동 80세대를 대상으로 약 1억2000만원의 예산을 들여 지난 8월 말부터 시행, 수돗물 녹물발생 방지를 위한 갱생기술의 완성도를 검증·확인한다는 것. 기존 옥내급수관 갱생기술은 평균 관직경 15mm인 소형관에 대한 정밀시공이 어려워 녹이 재발하는 경우가 많았다. 하지만 이번에 개발된 기술은 수도관 내부의 녹 제거 및 관 내부 표면이 균일토록 코팅할 뿐 아니라 시공 후 마이크로 로봇을 이용, 관 내부 촬영 및 절연도 체크를 통해 코팅 완성도를 확인, 녹 재발 가능성을 미연에 방지한다. 이번 기술이 검증되면 환경부는 선박배관, 빌딩, 냉각수배관, 소화용배관, 산업용배관 등에도 확대 적용하고 해외진출을 통해 물산업 육성 아이템으로 발전시킬 계획이다. 한편 환경부는 지난 2005년 수도법을 개정, 건축연면적 6만$m^2$이상 다중이용건축물과 연면적5,000$m^2$이상 국.공립 공공시설은 준공 5년 후부터 매년 수질검사를 실시, 결과에 따라 수도관을 세척·갱생 또는 교체토록 올해 1월부터 의무화 하고 있다.

  • PDF

A Study of Water-Hammer Control with Statuette-Piping (입상 급수 라인의 수충격 현상 제어에 대한 연구)

  • Lee, J.H.;Lee, H.H.;Kyoun, B.H.;Woo, J.W.;Lee, K.H.
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.674-678
    • /
    • 2007
  • 기술수준의 발달로 인해 건물이 대형화 고층화됨에 따라 높은 양정의 펌프를 사용하고 있으며, 배관계통을 대부분 전자식 밸브를 채택하여 입상급수라인의 수충격 현상이 대두되어 수충격 현상제어를 위한 여러 방법들이 시행되고 있다. 본 연구는 수충격 현상을 제어하는 방법 중 수충격 방지기를 이용하여 입상급수라인의 수충격 현상의 제어를 효과적으로 제어할 수 있었다. 향후 본 연구를 계속 진행 시켜나감에 따라 수충격 현상의 제어에 큰 성과를 거둘수 있을 것으로 판단된다.

  • PDF

배관재의 수급현황과 전망

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • s.1
    • /
    • pp.141-143
    • /
    • 1990
  • 설비분야의 배관재는 난방용 배관재와 위생용 배관재 등으로 각별한 구분이 지어지지 않고 있다. 수요자들이 필요에 따라 난방용 급수 위생용 등으로 선택하기 때문이다. 그러나 가장 불꽃 튀는 경쟁을 벌이는 곳이 온돌 용 배관재시장이다. 아연도금 강관이 부식성 문제로 난방용으로 적합치 않다는 보고가 있고서부터 동관과 XL파이프 등이 주도권을 잡기 시작, 치열한 경쟁을 벌이고 있다. 현재 난방용 배관재 시장에서 합성수지관이 $50\%$, 동관이 $30\%$, 기타가 $20\%$를 차지하고 있으며 합성수지관이 계속적인 증가추세에 있다.

  • PDF

스테인레스$\cdot$코일드튜브에 의한 헤더 공법

  • 화전황미
    • 월간 기계설비
    • /
    • s.64
    • /
    • pp.69-75
    • /
    • 1995
  • 일본의 근대수도는 100년을 넘는 역사를 갖고 있으며 보급률은 95$\%$에 달하고 대부분의 국민이 수도에 의존하여 건강하고 위생적인 생활을 이루는 기반시설로서 정착하고 있다. 그러나, 건축후 25년을 경과한 맨션 100만동 이상의 거주자가 급수$\cdot$급탕의 적수$\cdot$청수$\cdot$부식누수의 피해에 고민하고 있다. 전번 NHK의 프라임 10에서 $\ulcorner$고치려고 해도 고쳐지지 않는 고령화 맨션의 우울 $\lrcorner$이라고 하는 제목으로서 맨션배관정비개수비 4억엔으로 고민하는 거주자의 곤혹의 실태가 영상으로 호소되었다. 매년 150만호가 건축되는 주택의 급수급탕배관의 대부분이 라이닝강관과 테이퍼 나사 조인트 분기공법으로 시공되고 있다.

  • PDF

Erosion-Corrosion Behavior of Power Plant Pipe Caused by Hot Feed Water (고온 급수에 의한 파워 플랜트 배관 침식-부식 거동)

  • Bang, Sung-Ho;Lee, Jin-Won;Kim, Tae-Won
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.6
    • /
    • pp.739-745
    • /
    • 2013
  • In this study, we tried to define the erosion-corrosion behavior together with the resulting effects on a pipe that is a part of a feed water circulation system according to the pipe size and hot feed water environment. An erosioncorrosion analysis was performed through the Hayduk and Minhas model based on the chemical reaction between iron and oxygen, an essential corrosive factor. The erosion-corrosion rate against the pipe diameter and feed water temperature was then evaluated by means of finite element analysis using ABAQUS. As shown in the results, the feed water temperature was the main factor influencing the erosion-corrosion rate; in particular, it was expected that the thickness of 316 stainless steel would decrease by $2.59{\mu}m$ every year in a hot water environment at $290^{\circ}C$.