• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.9-18
• /
• 2013

In order to optimize the gold leaching process from refractory sulfide concentrate, a chlorine-hypochlorite solution with varying concentrations and temperatures were applied to salt-roasted concentrate. The concentrate consisted of pyrite, chalcopyrite, and galena, which were turned into hematite through air-roasting at $750^{\circ}C$. Also these concentrates were changed into hematite and nantokite (CuCl)) through salt (NaCl)-roasting at $750^{\circ}C$. The results of the gold leaching experiments showed that the best gold leaching parameters were obtained when the hydrochloric acid-sodium hypochlorite mix was at a ratio of 1 : 2, the added concentration was 1.0 M concentration, the pulp density was 1.0%, and the leaching was done at a $60^{\circ}C$ leaching temperature. The leaching rate for gold was much greater in the roasted concentrate than in the raw concentrate. The leaching rate was greater in the salt-roasted concentrate than in the plain roasted concentrate too. From XRD analysis, quartz was found in the salt-roasted concentrate and in the solid residue from the chlorine-hypochlorite leaching solution at $60^{\circ}C$.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.33-37
• /
• 2013

A study on the removal of arsenic from gold concentrate was conducted using thermal decomposition method at $700^{\circ}C$ as a function of reaction time. In addition, the arsenic removed from the concentrate was also collected in the bag-filter as a form of AsS. The content of arsenic in the concentrate was dramatically decreased from 12.62 wt/% to 1.40 wt.% for 1 hour and even lower than 1 wt.% after two hours. The removal efficiency of arsenic was finally achieved to be about 95% after 2 hours at a given temperature.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.113-126
• /
• 2019

This study aimed to effectively dissolve sulfide minerals through microwave-nitric acid leaching of invisible gold concentrate and then recover gold from the solid-residue with fire assay. For the purposes, this study conducted microwave-nitric acid leaching experiments to examine nitric acid concentration, time of microwave leaching, and sample addition effect. As results of the experiments, this study discovered that the weight loss rate of solid-residue increased as nitric acid concentration and microwave leaching time increased while weight loss rate decreased as sample addition increased. In an XRD analysis with solid-residue, it was discovered that pyrite completely disappeared when the nitric acid concentrate was 6 M and the microwave leaching time was 18 minutes. When a fire assay was carried out with solid-residue, gold particles with more content were recovered as nitric acid concentration and microwave leaching time increased whereas gold particles with more gold content were recovered as the sample addition decreased.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.21-28
• /
• 2013

In order to optimize gold leaching from refractory sulfide concentrate, a HCl-NaClO-$FeCl_3$ solution with varying attributes was applied to the roasted concentrate from Uil mine. The gold from Uil mine occurs in the form of invisible gold that is difficult to leach. The results of the gold leaching experiments showed that the best gold leaching parameters were $550^{\circ}C$ of roasting temperature, 2.0 M of concentration, 1.0% of pulp density, and $70^{\circ}C$ of leaching temperature. It is confirmed that the HCl-NaClO-$FeCl_3$ solution was an environmentally friendly method to leach gold and silver from the refractory sulfide concentrate as an alternative lixiviant to cyanide.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2013

In order to dissolve Au, Ag, and other valuable metals from gold ore concentrate, raw gold concentrate was pre-treated by roasting and salt-roasting at $750^{\circ}C$. The roasted concentrate was treated with aqua regia digestion to dissolve the valuable metals and higher amount of Au, Ag, and valuable metals were extracted from the roasted concentrates than from the raw concentrate. Higher amount of these metals were also extracted from the salt-roasted concentrate than from the roasted concentrate. The results of the gold dissolution experiments showed that the gold dissolution was most efficient when particle size, roasting temperature, and the percentage of added salt in salt roasting were about $181{\sim}127{\mu}m$, $750^{\circ}C$, and was 20.0%, respectively. The XRD analysis suggests that quartz and pyrite were not destroyed even through roasting at $750^{\circ}C$ and decomposition with aqua regia. However, through salt roasting, pyrite was completely decomposed, whereas quartz could not be destroyed through salt-roasting at $750^{\circ}C$ and aqua regia digestion. Accordingly, it was expected that the gold contained in quartz can not be dissolved through salt-roasting and treatment with aqua regia.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.3
• /
• pp.115-124
• /
• 2014

In order to leach Au and Ag from gold-silver bearing sulfide concentrate, the sulfide concentrate was ground in a ball mill for a dry pre-treatment and a wet pre-treatment process. Mineralogical studies and thiourea leaching experiments were carried out with the pre-treated sulfide concentrate. The results of the pre-treatment with the concentrate samples showed the mean particle size and iso-electrical potential was smaller in the dry pre-treatment sample than in the concentrate sample, and the contents was lower in the wet pre-treatment sample than in the dry pre-treatment sample. In XRD analysis, amorphous properties were only shown in the wet pretreatment sample. The results of the concentrate sample leaching experiments showed that the best Au, Ag leaching parameters were when the addition of thiourea was at a 1.0 g concentration, ferric sulfate was 1.0 M, sulfuric acid was 2.0 M and the leaching temperature was at $60^{\circ}C$. The Au, Ag leaching rate was always much greater and faster with the wet pre-treatment samples than with the dry pre-treatment samples. Accordingly, it is expected that more Au, Ag can be leached in an eco-friendly methodology using wet pre-treatment. The pre-treatment could be improved with an optimized grinding additive reagent and through researching grinding time in future non-cyanide processes.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2019

This study used microwave-nitric acid leaching with the aim of removing penalty elements such as As and Bi. Moreover, enhanced gold content from the gold concentrate sample. The leaching conditions were changed: leaching time, nitric acid concentrations and solid-liquid ratio; In order to improve the removal of penalty elements. As a result of the experiment; sample weight loss rate, As and Bi removal rate and gold content in the solid-residues have been increased when the nitric acid concentration and leaching time were increased while the solid-liquid ratio was decreased. The leaching conditions for the maximum As and Bi removal and gold content were: leaching with a 6.0 M nitric acid solution doing 5 min. At these, the solid-residue sample weight loss was 87 %. As removal rate was 98.23 % and Bi was completely removed (100 %). Furthermore, gold content increased from 81.36 g/t to 487.32 g/t. The XRD of the solid residue showed that pyrite disappeared as the nitric acid concentration was increased, whereas sulfur peaks was increased, too.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.185-200
• /
• 2019

This study aimed to liberate gold from invisible gold concentrate (Au = 1,840.00 g/t) through microwave nitric acid leaching experiments. For the purpose, this study conducted microwave-nitric acid leaching experiments and examined nitric acid concentration effect, microwave leaching time effect and sample addition effect. The results of the experiments were as follows: Au (gold) contents were not detected in all of the microwave leaching conditions. In the insoluble-residue, weight loss rate tended to decrease as the nitric acid concentration, microwave leaching time and sample addition increased. In an XRD analysis with solid-residue, it was suggested that gypsum and anglesite were formed due to dissolution of calcite and galena by nitric acid solution. When a fire assay was carried out with insoluble-residue, it was discovered that gold contents of the solid-residue were 1.3 (Au = 2,464.70 g/t) and 28.8 (52,952.80 g/t) times more than those of concentrate. But in the gold contents recovered, a severe gold nugget effect appeared. It is expected that the gold nugget effect will decrease if a sampling method of concentrate is improved in the microwave-nitric acid leaching experiments and filtering paper with smaller pore size is used for leaching solution and burned filter paper is used for sampling in lead-fire assay.

• 보일러설비
• /
• s.20
• /
• pp.142-163
• /
• 1990

금후 건물이나 기기의 성에너지화가 진척됨에 따라 에너지 수요를 둘러싼 에너지간의 경합이 더욱 심화될 것이 예상된다. 따라서 가스에너지의 메리트를 최대한으로 살리는 기술과 상품을 개발하여 마케팅활동의 일환으로 전개시키고 싶다. 여기서는 일본에서의 새로운 기기, 설비 및 금후의 기술개발을 중심으로 보고하고자 한다.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.645-655
• /
• 2014

In order to obtain pure metallic Te from gold concentrate, roasting treatment, hypochlorite leaching, Fe removal and electrolysis experiments were carried out. The contents of Au, Ag and Te from the concentrate sample and roasted sample were much more soluble in the hypochlorite solution than in aqua regia digestion, whereas the metals Pb, Zn, Fe and Cu were easier to leach with the aqua regia than the hypochlorite. With the addition of NaOH in the hypochlorite leaching solution prior to electrolysis, the Fe removal rate achieved was only 96% in the concentrate sample, while it reached 98% in the roasted sample. The results of electrolysis for 240 min, 98% of the metallic copper was recovered from the concentrate sample, while 99% was obtained from the roasted sample due to the removal of S by roasting. The amount of anode slime was also greater in the electrolytic solution with the roasted sample than with the concentrate sample. The results on the anode slime after the magnetic separation process showed the amount of metallic pure native tellurium recovered was greater in the roasted sample than in the concentrate sample.