• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.48-56
• /
• 2011

Purpose : The aim of this study is to measure the typical MR variables such as $T_1$- and $T_2$-relaxation times according to morphological characteristics of gold nanopartides as a preliminary study to perform theragnosis using local heating by gold nanopartides. Materials and Methods : Two types of gold nanoparticles were used. Spheres were synthesized by various methods and stirring speed. Rods were synthesized by adding various concentrations of sphere nanopartides. Gold nanopartides were mixed with 2% agarose gel at 1:1 ratio and then signals were acquired using a 1.5T MRI. For the measurements of $T_1$-and $T_2$-relaxation times, TR and TE were varied, respectively. The results were acquired through $T_1$ and $T_2$ curves based on the intensities of MR image using self-developed software. And Statistical analysis was performed. Results : $T_1$ times were measured 1.86 sec and 2.08 sec for sphere and rod, respectively. On the other hands, $T_2$ times were measured 57 ms and 35.45 ms for sphere and rod. Conclusion : The changes of the MR variables according to the morphological characteristics of the gold nanopartides were confirmed. Optimal MR imaging conditions can be obtained by choosing proper TR and TE according to the type of nanoparticles.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.153-159
• /
• 2016

This study investigated relationship between secondary electrons produced from single gold nanoparticle as a result of its interaction with radiation and particle size and incidence energy, provided basic data related to the dose enhancement effect based on gold nanoparticles. Monte Carlo simulation was applied by using MCNPX MC code, 50, 100, 150 kV and 6, 15 MV x-ray energy was used. In a water phantom, single gold nanoparticles that are 30, 50, 70, 90, and 110 nm in diameter were placed and the tally volume was designated at every 10 nm. Difference in electrons produced from gold nanoparticles was normalized based on absence of nanoparticle. When the X ray energy decreased and the diameter of gold particles increased, more electrons were produced. When the energy was lower, in the linear formula related to nanoparticle size and electron production, the gradient was higher. And, in comparison to the MV X-ray, at kV X-ray, significantly more electrons were produced. This study can be used as data to understand the dose enhancement effect based on gold nanoparticles, and further research related to various materials that dose enhancement including gold nanoparticles needs to be conducted.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.272-276
• /
• 2005

[ $C_{70}$ ]-gold nanoparticle multilayer films were self-assembled using a 'dirt-ball' method on the reactive surface of glass slides functionalized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were soaked in the solution containing both unmodified $C_{70}$ and ${\omega}$-amino-functionalized gold nanoparticles. Organic reaction (amination) facilitated the assembly of multilayer $C_{70}$-gold nanoparticle films, which have grown up to several layers. Chemical stability of $C_{70}$-gold nanoparticle films was studied by monitoring the changes in absorbance after the immersion of the films in acidic solution. In addition, ultrasonic stability of these nanoparticle films was studied by exposing them to ultrasonic irradiated surrounding, which resulted in partial desorption and a little aggregation of nanoparticles on solid surfaces.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.161-165
• /
• 2011

This study is related to the preparation of biocompatible gold nanoparticles (AuNPs) which are stable in aqueous solutions for a long time. Ultrasmall polyethyleneimine (PEI)-capped AuNPs (PEI-AuNPs) with limited agglomeration were prepared in aqueous solutions at room temperature, which were based on the roles of PEI as a reductant and a stabilizer. PEI-AuNPs with an average size of 8~12 nm formed highly stable nanocolloids with an average hydrodynamic cluster size of around 50 nm in aqueous media. At a low concentration of metal precursor hydrogen tetrachloroaurate (III), the particle size was reduced noticeably. The typical peaks of gold were observed in the X-ray diffraction pattern of AuNPs. The cell viability of 98% was obtained in the case of PEI-AuNPs, while PEI was cytotoxic. The PEI-AuNP is considered to be a potential candidate as a contrast agent for computed tomography.

• Journal of the Korean Vacuum Society
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2012

We fabricated the textured silicon (Si) surface on Si substrates by the electrochemical etching using gold (Au) nanoparticle catalysts. The antireflective property of the fabricated Si nanostructures was improved. The Au nanoparticles of ~20-150 nm were formed by the rapid thermal annealing using thermally evaporated Au films on Si. In the chemical etching, the aqueous solution containing $H_2O_2$ and HF was used. In order to investigate the effect of electrochemical etching on the etching depth and reflectance characteristics, the sample was immersed in the aqueous etching solution for 1 min with and without applied cathodic voltages of -1 V and -2 V. As a result, the solar weighted reflectance, i.e., the averaged reflectance with considering solar spectrum (air mass 1.5), could be efficiently reduced for the electrochemically etched Si by applying the cathodic voltage of -2 V, which is expected to be useful for Si solar cell applications.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.477-483
• /
• 2016

The effect of dose enhancement was evaluated using Snyder head phantom, dependence on size of gold nanoparticle and material concentration in megavoltage X, ${\gamma}$-ray. Monte Carlo simulation using MCNPX was used for 4, 6, 10, 15 MV and Co-60 ${\gamma}$-ray. Described the tumor in Snyder head phantom, gold nanoparticle of 25, 75, 125nm diameter was inserted inside tumor. Concentration of dose enhancement material was used for 5, 15, 25 mg/g and dose enhancement factor was calculated on the basis of the no dose enhancement material. The lower incident energy and the higher concentration of material were that high dose enhancement factor is indicated. The size of gold nanoparticle had relatively high dependence on lower incident energy and higher concentration of material. It will increase dose inside the tumor, and be additional effect of use of gold nanoparticles in radiation therapy.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.163-167
• /
• 2021

In the present work, we studied a method for the synthesis of uniform gold-peptide hierarchical superstructures using tyrosine rich peptide, Tyr-Tyr-Leu-Tyr-Tyr (YYLYY). Peptide nanoparticles self-assembled by dityrosine bonds were synthesized through the photo-crosslinking reaction of the peptide, and gold-peptide hybrid nanoparticles were synthesized using biomineralization properties of tyrosine in a green synthetic manner. The synthesized gold-peptide hybrid nanoparticles were then characterized by transmission electron microscopy, scanning electron microscopy, dynamic light scattering, UV-vis spectroscopy, scanning transmission electron microscopy-energy dispersive X-ray spectroscopy, and X-ray diffraction. Furthermore, the catalytic activity of gold-peptide hybrid nanoparticles was confirmed by the reduction reaction of methylene blue where the catalytic reaction rate constant was 13.4 × 10-3 s-1.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.191-191
• /
• 2010

초전도 전력 기기를 안정적으로 운용하기 위해서는 고자장하에서 높은 임계 전류 밀도($J_c$)를 지닌 초전도체 개발이 필수적이다. 최근 고자기장에서 전기적 특성을 향상시키는 방법으로는 YBCO 박막선재에 인위적 피닝센터로 고자장하에서도 $J_c$가 크게 증가 되었다고 보고되고 있다. 본 연구에서는 STO(100) 기판 위에 SAM 방법을 이용하여 금 나노분말을 분산시킨 후 PLD로 YBCO 박막을 증착하여 미세구조와 전기적인 특성을 분석하였다. 분산된 금 나노분말은 열처리전 나노입자의 높이는 29~32 nm, 지름은 41~49 nm툴 나타내었고 $800^{\circ}C$에서 진공 열처리 후에는 높이는 25~30 nm, 지름은 52~60 nm로 변형되었다. 임계온도는 순수 YBCO에서 85 K을 나타냈지만 금 나노입자를 적용한 YBCO의 경우는 80K으로 낮아진 것을 확인하였다. 임계전류밀도는 4T에서 측정된 경우 65 K에서는 순수한 YBCO는 141 KA/$cm^2$에서 금 나노입자가 형성된 기판에 증착한 YBCO는 42 KA/$cm^2$로 낮아졌다.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1048-1051
• /
• 2003

주사탐침현미경 (Scanning Probe Microsope, SPM)을 이용하여 직접 패터닝을 함으로써 hexanedithiol 분자의 임의 패턴을 금 표면에 형성하였다. 또한, hexanedithiol 분자는 양단에 thiol 그룹이 존재하여 금과 안정화 화학결합을 이룰 수 있으므로, 금 표면과결합을 이루고 있지 않는 상단의 thiol 그룹에 금 나노 입자를 고정함으로써 나노입자의 패턴을 제작하였다. SPM을 이용한 직접 패터닝 방법은 분자활성을 유지한 채로 임의 패턴을 수십 nm의 선폭으로 구현하는 것이 가능하므로, 나노입자 배열뿐만 아니라, 생화학물질의 패터닝을 통한 바이오 기술연구, 레지스트용 분자 패터닝과 시각 및 흡착 등의 계속적인 공정을 통한 다양한 나노구조 제작 등에 폭넓게 활용될 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.424-424
• /
• 2011

금속 나노 입자는 국소 표면 플라즈몬(Localized Surface Plasmon, LSP)이 여기 되며 이의 국부 환경 변화에 대한 민감한 의존성으로 인하여 생화학적 센서로의 응용이 크게 주목 받고 있다. LSP는 금속 나노 입자의 재료, 모양, 크기 그리고 주변 환경 변화에 민감하게 의존한다는 것이 알려져 있다. 금속 나노 입자를 소자로 응용하기 위해서는 일반적으로 기판을 사용하게 되며 이때 기판의 재료적 특성이 LSP에 서로 다른 영향을 준다. 기판은 재료의 광학적인 특성에 따라 유전체, 반도체 그리고 금속으로 분류할 수 있다. 유전체와 반도체 기판과는 다르게, 금속 기판은 표면의 자유전자가 금속 나노 입자에 구속된 자유전자와 반응하여 추가적인 플라즈몬모드를 형성한다. 이번 연구에서는 금속 기판 위에 지름이 100 nm인 콜로이드 금을 분산시킨 후 광산란 신호를 검출하고 금속 기판이 LSP에 미치는 영향을 하부금속 금속층 물질 및 두께의 함수로 하여 분석하였다. 또한, 콜로이드 금 주변의 굴절률 변화에 대한 반응도를 분석하여 센서로서 특성을 평가하였다.