• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.6 no.2
• /
• pp.99-108
• /
• 2002

그리드 고정용 전자석은 절단금형에서 여러 조각으로 나누어진 매우 얇고 가벼운 그리드를 전자석에 흡착시켜 그리드를 부착한 장소까지 이송하는 역할을 하는 전자석이다. 설계목표는 (1)그리드 고정용 전자석이 착자, 탈자 및 이동시 전자석에 흡착된 그리드 조각의 정렬상태가 동요되지 않는 전자석의 설계, (2)금형(그리드 흡착면)에 잔류자기가 최소화되는 설계, (3)전자석이 탈자되었을 때, 잔류자기가 최소화되는 설계에 초점을 두었다. 자장분포는 유한요소법으로 계산하였고, 전자력 계산은 Maxwell stress tensor법을 사용하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.252-254
• /
• 2009

프로그레시브 노칭과 포밍금형에 있어서 박판성형해석에 의한 사전 분석은 제품을 양산하는데 꼭 거쳐야 하는 필수과정이다. 본 논문에서 연구한 Ez5는 일본 S 자동차의 미국 현지 공장에서 발주한 수출 금형을 가지고 스트립 레이아웃 설계에 관한 것을 연구한 것이다. 광폭 1열 1개 뽑기의 편측캐리어를 단 배열로 블랭크 레이아웃을 최적화하였다. 사용된 3D CAD/CAM 소프트웨어는 Cimatron E Die Design이며 10개 공정으로 스트립 레이아웃설계를 완성하였다.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.156-164
• /
• 1996

To investigate the behavior of plastic deformation in axisymmetric extrusion through square dies, experimental works with the plasticine as a model material are carried out at the room temperature. Some mechanical properties of the model material are determined by compression and ring compression tests. Visioplasticity method using expermental grid distortion in extrusion is introduced to analyze the plastic flow strain rate and strain distribution. In spite of severe deformation during the extrusion through square die the visioplasticity method shows good results for the distribution of effective strain rate and effective strain.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1619-1625
• /
• 2011

The objective of this study determine the molding conditions of a double-shot injection mold for fabricating a computer mouse using different materials, by performing three-dimensional injection molding analysis. In order to select the optical injection molding conditions, the effects of the injection time, the maximum injection pressure, the effect of packing time on the injection molding characteristics, and the product qualities were quantitatively examined. From the results of the injection molding analysis, the optimal injection molding conditions of the double-shot injection mold, which leads the molded product to the minimized shrinkage and deflection, were estimated. The results of the injection molding experiments, showed that an appropriate computer mouse can be fabricated using different materials when the identified optimal injection molding conditions are adopted.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.69-73
• /
• 1992

일반적으로 사출성형법은 유동, 보압, 냉각과정등 크게 3단계로 나눌 수 있는 데 유동해석에 관한 수치해석은 Tadmor 등이 FAN(Flow Analysis Network) 방법을 도입하면서 실제 적용에 활발히 쓰이고있다. 그리고보압은 후충전 과정으로써 충전이 끝난후 수축된 부분을 보상하기 위해서 수행되는 단계이다. 본 연구에서는 실제 사출금형 제작 시 결정해야 될 냉각 채널의 위치, 크기, 수동에 대한 설계기준을 얻을 수 있는 냉각해석 프로그램을 개발하였다. 이를 위하여경계 요소법(Boundary Element Method)을 이용하였으며 일반적인 냉각 채널 즉, Annual, Baffle 및 Bubber등 에 대한 해석이 가능하도록 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1349-1350
• /
• 2011

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.216-225
• /
• 2023

This paper describes the finite element analysis and die design change of cold heading punching process to increase the cold forging tool life and reduce the tool wear and stress concentration. Through this study, the optimization of punch tool design has been studied by an analysis of tool stress and wear distribution to improve the tool life. Plastic deformation analysis was carried out in order to understand the cold heading process between tool and workpiece stress distribution. Cold heading punch die design was set up to each process with different four types analysis progressing, the cold heading punch dies shapes with combination of point angle and punch edge corner radius shapes of cold forging dies, punch die material properties and frictional coefficient. The design parameters of point angle and corner radius of punch die geometry, die material properties and frictional coefficient were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the cold heading punch die design parameters optimization for bolt head cold forging process, it was possible to expect an reduce the cold heading punch die wear to the 37 % compared with current using cold heading punch in the shop floor.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.124-127
• /
• 2009

In this paper, a longitudinal die insert fracture which occurred during cold forging of a high strength ball-stud with a sound die design nearly optimized empirically for relatively low strength material of SCM435 is introduced and the reason is revealed. A comparative study between SCM435 and ESW105 is quantitatively made using a thermoelastic finite element method for die structural analysis coupled with a forging simulator theoretically based on a rigid-plastic finite element method. It has been shown that the longitudinal die insert fracture caused from non-optimized value of shrink fit, emphasizing that the die optimal design is inevitable for cold forging of high strength materials.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.111-115
• /
• 2001

The die design for hot forging was investigated for manufacturing precisely of scroll rotor made with Al-Si alloy. A scroll rotor is a non-symmetric 3-D shape part, having involute wraps. Disk-shaped billet of Al-Si alloy was extruded to wraps and boss simultaneously. Because the involute wraps is not axi-symmetric, the flow velocity and the stress of die is very much different at each portion. Moreover, the die in wraps portion is a cantilever beam and fractured. In this paper, the analysis of forming and die stress is investigated using the FEM tool, DEFORM-3D. The tensile strength of tool material is $250kg/mm^{2}$. From the analysis results, we can find the maximum principal stress of die is over the fracture strength and redesign the die. The prototype forged part is superior in net shaping and microstructure.

• Transactions of Materials Processing
• /
• v.7 no.1
• /
• pp.72-80
• /
• 1998

This study is concerned with the thermo-biscoplastic finite element analysis of hot tube extrusion through square dies with a mandrel. The problem is treated as a non-steady state and the ALE description is used due to abruptly turning flow at the die aperture. Since the contact heat transfer coefficient and the friction factor are required in the analysis experiments are also carried out to determine the values, In order to apply ceramics to an extrusion die the study is focussed on under-standing the characteristics of the process. The simulated results provide the useful informations such as metal flow temperature distribution stress state etc. The elastic analysis of the dies is carried out to obtain the stress state of the ceramic dies.