• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.877-885
• /
• 2013

A seawater pipe of the engine room in the ships is being surrounded with severely corrosive environments caused by fast flowing of the seawater, containing aggressive chloride ion and high conductivity etc.. Therefore, the leakage of the seawater from its pipe have been often occurred due to its local corrosion by aggressive chloride ions. Subsequently, its leakage area is usually welded by AC shielded metal arc welding with various electrodes. In this study, when the sea water pipe is welded with several types of electrodes such as E4301, E4311, E4313 and E4316, a difference of the corrosion resistance on the welding metal zones was investigated using an electrochemical method, observing microstructure, measuring polarization behaviors and hardness. The weld metal zone welded with E4313 electrode exhibited the lowest value of hardness compared to other weld metal zones. In addition, its zone indicated also the best corrosion resistance than those of other weld metal zones. Furthermore, all of the weld metal zones revealed a relatively better corrosion resistance than those of the base metal zones. and also showed higher hardness than the base metal zones.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.643-649
• /
• 2016

When a cyclotron produces $^{18}F^-$, accelerated protons interact with metal parts of the cyclotron machine and induces radioactivity. Especially, the target window and chamber of the target assembly are the main parts where long-lived radionuclides are generated as they are incident by direct beams. It is of great importance to identify radionuclides induced in the target assembly for the safe operation and maintenance of a cyclotron facility. In this study, we analyzed major radionuclides generated in the target assembly by an operation of the Cyclotron 18/9 machine and measured dose rates after the operation to establish the radiation safety guideline for operators and maintenance personnel of the machine. Gamma spectroscopy with HPGe was performed on samples from the target chamber and Havar foil target window to identify the radionuclides generated during the operation for production of $^{18}F^-$- isotope and their specific activity. Also, the dose rates from the target were measured as a function of time after an operation. These data will help improve radiological safety of operating the cyclotron facilities.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.179-179
• /
• 1998

실리콘 집적회로 제조시 sub-micron 의 contact 형성 공정은 질연막 형성 후 이의 식각 및 세정, c contact 실리사이드, 획산방지막, 배선 금속층의 형성 과정올 거치게 된다. 본 연구팀에서는 C.F야f2 헬리 콘 플라즈마훌 이용한 고선택비 contact 산화막 식각공정시 형성된 잔류막충과 오염 손상올 관찰하고 산소 플라즈마 처리와 후속 열처리에 따른 이들의 제거 정도를 관찰하여 이에 대한 결과를 발표하였다. 본 연구메서는 식각 및 후처리에 따라 잔류하는 잔류막과 손상층이 후속 공정인 contact 실리사이드 형 섬에 미치는 영향올 관찰하였다. C C.F바f2 웰리콘 풀라즈마률 이용한 식각시 공정 변수로는 수소가스 첨가, bias voltage 와 과식각 시간 의 효과를 관찰하였으며 다른 조건은 일정하게 하였다 .. Contact 실리사이드로는 Ti, Co-싫리사이드를 선 택하였으며 Piranha cleaning, 산소 플라즈마 처리, 산소 풀라즈마+600 'C annealing으로 각각 후처리된 시 편을 후처리하지 않은 시펀돌과 함께 실리사이드 형성용‘시펀으로 이용하였다 각각 일정 조건에서 동 일 두께의 실리사이드훌 형성시킨 후 4-point probe룰 이용하여 면저황올 측정하였다 후처리하지 않은 시편의 경무 실리사이드 형성은 아주 시펀의 일부분에서만 형성되었으며 후속 세정 및 얼처리훌 황에 따라 실리사이드의 면저항은 감소하여 식각 과정을 거치지 않은 깨끗한 실리콘 웨이퍼위에 실리사이드 를 형성시킨 값(control 값)에 접근하였다. 실리사이드의 면저항값은 식각시 노훌된 실리콘 표면 위에 형 성된 손상충보다는 잔류막에 큰 영향을 받았으며 수소 가스가 첨가된 식각 가스로 식각한 시편으로 형 성한 실리사이드의 면저항값이 손상이 상대적으로 적은 것으로 관찰된 수소훌 첨가하지 않은 식각 가 스로 식각한 시펀 위에 형성된 실리사이드의 면저황에 비해 낮은 값을 나타내었다. 실리사이드의 전기적 륙성에 미치는 손상층의 영향올 좀더 면밀히 관찰하고자 bare 실리콘 wafer 에 잔류막이 거의 없이 손상층을 유발시키는 식각 조건들 (100% HBr, 100%H2, 100%Ar, Cl싸fz)에 대하여 실 리콘 식각을 수행한 후 Co-실리사이드률 형성하여 이의 면저황을 측정한 걸과 100% Ar 가스로 식각된 시편을 이용하여 형성한 실리사이드의 면저항은 control 에 기까운 면저항값올 지니고 따라서 손상층이 실리사이드 형섬메 미치는 영향은 크지 않음을 알 수 있었다. 이상의 연구 결과훌 통해 손상층이 실리사이드의 형성이나 전기적 톡섬에 미치는 영황은 잔류막층 에 의한 영향보다 적다는 것을 알 수 았으며 잔류막층의 두께보다는 성분이나 걸합상태, 특히 식각 및 후처리 후 잔류하는 탄소 싱분과 C-Si 결함에 큰 영향올 받는 것올 알 수 있었다.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.43-49
• /
• 2016

Gold threads mean thread made by metal, it is composed various material to gold leaf, adhesive and media. The making technique and using materials of Gold threads are different from region, it can be used to distinguish country of origin. So this study finds characteristics and making techniques for flat gold threads of relics. Standard samples are made of animal glue, lacquer, red lacquer and etc. This materials are based on the scientific investigation of cultural gold threads properties. Then traditional techniques were estimated by comparison and analysis of actual cultural properties and standard samples. As a result of investigating cultural properties, it is similar to the standard sample which are mixed with red soil additives. After analysis of SEM-EDS, it is detected to Al, Si, Fe. So it is to the conclusion that traditional gold thread is made of adhesive mixed with red soil to improve gold color better. And this ways are similar with china that uses animal glue and red soil to adhesive and different from japan that uses lacquer to adhesive. Through this study, it will be used to data and reference for reappearance and making techniques of traditional gold threads.

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.111-122
• /
• 2009

When the cattail pollen was identified by using fibrinolytic agents, we found that the fibrinolytic activity was controlled by an enzyme. Therefore, for determining the fibrinolytic activity of cattail pollen, the fibrinolytic enzyme in cattail pollen was purified by gel filtration using DEAE-cellulose, Sephadex G-150 and HPLC. Also, its purity was certified by polyacrylamide gel electrophoresis, and its physico-chemical properties, such as pH and temperature stabilities and effects of metal, inhibitors and substrates, were examined. The specific activity, purification fold, and molecular weight of the enzyme were 38U/mg, 86.4,and 75kDa, respectively. The optimum pH for the purified enzyme was at 4.0 and it was stable at pH 4.0-6.0. The optimum temperature was $55^{\circ}C$ and it was stable at $30-60^{\circ}C$. But the enzyme began to be inactivated at $70^{\circ}C$ and its activity was totally lost at temperatures above $80^{\circ}C$. As for substrate specificity, the enzyme was most effective in dissolving fibrin, followed by whole casein, ${\kappa}$-casein, ${\alpha}$-casein, ${\beta}$-casein, and BSA. With casein as the substrate, Km value was found to be 0.44mM and the enzyme showed a high affinity for casein. As for the metal ions affecting enzyme activity, $K^+$, $Na^+$, and $Mg^{2+}$ had no effect on enzyme reaction while $Zn^{2+}$ and $Fe^{2+}$ showed potent inhibitory activity. Judging from the fact that the purified enzyme was also strongly inhibited by PMSF, iodoacetic acid, and SDA, it assumed to be a serine protease.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.429-436
• /
• 2010

Dyestuffs extracted from fifteen kinds of natural dyeing materials were researched on their antimicrobial performance against 3 kinds of bacteria and 2 kinds of fungi in order to develop conservation/storage materials of traditional and natural dyed papers. The three types of mordants were evaluated by using the same method and then mixed with the dyestuffs to research their antimicrobial performance. With those results, dyed paper was made by mixing mordants with 9 kinds of dyestuffs with excellent antimicrobial performance. Among the dyed papers, Cotinus coggygria, Coptis chinensis, Phellodendri amurense, Rhus javanica and Acer ginnala multiple mordant papers were found to have an antibacterial quality against fungi, while, in the insect repellent experiment using termites, Coptis chinensis and Phellodendri amurense dyed papers were found to have insect repellent qualities. Also, with regard to the research result about the affect of dyeing paper on other materials like metal, Coptis chinensis have relatively stable qualities. Also, the three types of dyeed paper by Cotinus coggygria, Coptis chinensis and Phellodendri amurense, were found to have a tendency to remove harmful gases. Not only can these dyed papers be used for making storage box for cultural properties to prevent various organic artifacts from bio-damaging, but they can also be utilized as functional finishing materials in various spaces.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.302-308
• /
• 1993

Monolayers of calcium palmitate were deposited on a piezoelectric quartz crystal plate by the Langmuir-Blodgett(LB) technique, and it was found from frequency changes of the quartz crystal deposited LB films. The usual carbonyl absorbance at 1704 cm$^{-1}C$ was replaced by the split band in the 1540~1590 cm$^{-1}C$. The two absorptions at 1580 cm$^{-1}C$ and 1540 cm$^{-1}C$ were assigned to the antisymmetric stretching vibration of the calcium carboxylate group and the hydrated species due to the lowering carbonyl stretching frequency by hydrogen bonding$^1$ respectively. Besides, it was demonstrated by X-ray diffraction analysis. The swelling behaviour of LB films in water phase at 23$^{\circ}C$ was observed from the frequency change of the LB films deposited quartz crystal with time. Calcium palmitate LB films has been found to swell substantially in water without flaking, whereas hexadecanol LB films hardly swelled in water. Amount of swelling of calcium palmitate LB films was equivalent to 47 wt.${\%}$ of the dry LB films, which means that ca. 7 water molecules were incorporated per calcium palmitate amphiphile. Chemical structure of calcium palmitate LB film was estimated as [CH$_3$(CH$_2$)$_{14}$COO]$_2$Ca${\cdot}$XH$_2$O, and the hydration number was 1.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.309-315
• /
• 2002

Conventional electromagnetic (EM) method using small loops as a source and receiver has been used in detection of conductive buried objects like a metal detector or in qualitative estimation of the subsurface conductivity variation. Recently, however, since detection of buried objects and imaging of the subsurface conductivity distribution in a relatively conductive area are in a high demand for environmental and engineering purposes, the quantitative interpretation technique of EM data is actively studied. In this regard, we introduce a brief principle of EM survey and show an example of the detection of buried conductive material and imaging of the subsurface conductivity distribution based on data measured at a test survey area. Through this study, we show that multi-frequency EM surveys using small loops may be a good solution to give quick and detail information of subsurface in a conductive survey area.

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.123-137
• /
• 2001

Background: The purpose of this study is to evaluate the accuracy of measurements obtained from 3-dimensional computerized tomography and 3-dimensional cephalogram constructed by using the frontal and lateral cephalogram of six human dry skulls. Materials and Methods: After CT scans and each cephalograms were taken, 3-dimensional coordinates (X, Y, Z) of landmarks were obtained using computer programs. In this study, the accuracy of both methods were determined by means of 14 linear measurements compare with caliper measurements. Results: The standard deviation of landmarks of 3-dimensional CT and 3-dimensional cephalogram were 0.23 mm, and 0.30 mm in X axis, 0.27 mm and 0.25 mm in Y axis, and 0.27 mm and 0.31 mm in Z axis. In both methods, the standard deviation were less than 0.5 mm in all landmarks, and the most of landmarks showed less than 1 mm in range. Concerning the accuracy, the mean difference between 3-dimensional CT and manual measurements was 0.33 mm, and 1.13 mm between 3-dimensional cephalogram and manual measurements. The distance between RGo and LGo showed the largest difference (2.03 mm). There were highly significant, and large correlation with manual measurements in both methods (p<0.01). Conclusion: It is concluded that closeness of repeated measures to each skulls reveal the precision of both methods. Computerized tomography and cephalogram for 3-dimensional measurement of maxillofacial structure are equivalent in quality to caliper measurements.