• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.26.2-26.2
• /
• 2010

최근에는 차세대 조명용 후보광원인 고출력 백색 LED를 개발하기 위한 경쟁이 치열하며, 이를 위해 업체가 고심하고 있는 가장 큰 문제 중의 하나가 칩에서 발생하는 열을 어떻게 관리하는가 하는 방열의 문제이다. 따라서, LED의 가장 큰 특징인 장수명을 손해보지 않기 위해서는 칩에서 발생되고 있는 열을 외부에 확산시키기 위한 기술 개발이 필수적이다. 다양한 방열소재 중 W-Cu 복합재는 W의 낮은 열팽창계수와 Cu의 높은 열전도도로 인해 방열소재로써 유망한 소재로 주목받고 있으나, 우수한 열적 특성을 발현하기 위해서는 고치밀화를 갖는 W-Cu 복합재 제조가 우선적으로 필요하다. W-Cu 복합체는 일반적으로 액상소결법을 통해 균일한 미세조직을 얻을 수 있으나, 열팽창계수를 낮추기 위해 Cu 함량이 적어지게 되면 치밀화가 어려우며 이를 해결하기 위해 나노입자를 갖는 분말을 이용하고자 하는 연구가 많이 진행되고 있다. 본 연구에서는 W과 Cu 산화물을 이용하는 것이 구성성분끼리의 편석이 발생하지 않으며, 소결성도 우수하여 양산화에 가장 접근한 방법으로 알려져 있다. 그러나, 지금까지의 얻어진 W-Cu 복합체의 경우, 분말상태에서의 얻어진 나노입자가 승온시에 마이크로 크기로 과도한 입자성장이 일어나기 때문에 소결 후에도 나노크기를 유지하기 어려울 뿐만 아니라, 구성상끼리의 응집체가 형성된다. 본 연구에서는 액상소결후에 W 입자가 Cu 기지내에 균일하게 분산되는 동시에 나노크기의 입자를 가지는 고분산 W-Cu 소결체를 얻고자 하였다. 이를 위해 금속산화물 분말의 분쇄를 위해 효과적인 방법으로 알려진 습식상태에서의 고에너지 볼밀링을 통하여 혼합된 텅스텐과 구리 산화물 분말의 수소환원공정을 통해 얻어진 100nm 이하의 입자를 가지는 W-20wt%Cu 나노복합분말을 출발분말로 사용하였다. W-20wt%Cu 나노복합분말의 성형체를 $1050^{\circ}C-1250^{\circ}C$의 온도범위에서 소결거동을 조사하였다. 그 결과, $1100^{\circ}C$ 온도에서 이론밀도에 가까운 소결밀도를 나타내었으며, 이는 기존에 비해 $100^{\circ}C$ 정도 치밀화 온도를 낮추는 결과이다. 소결체의 미세구조 관찰결과, 소결 후 약 200nm의 텅스텐 입자가 Cu내에 균일하게 분산되어 있었다. 제조된 W-Cu 시편에 대해서는 LED 응용성을 조사하기 위해 열전도도와 열팽창계수 등을 평가하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.89-95
• /
• 2009

The current enforce decree of "The Act on the Promotion of Construction Waste Recycling" divides seventeen kinds of construction wastes by property and configuration. Mixed construction waste, one of them classified by the enforce decree, is composed two more than justified construction wastes except refuse soil and rock. In construction wastes justified by enforce decree of this law, most refuse concrete and asphalt concrete of construction wastes are recycled. As well as refuse metal is separated, sorted from bulk them, and merchandised for value. Finally this is used the secondary manufactured products. Even though combustible construction wastes like refuse wood, plastics, fiber can be recycled RDF(Refuse derived fuel) or RPF(Refuse plastic fuel) because of high caloric value and low heavy metal but most of them are discharged as mixed construction waste and then treated by treated by incineration and landfill. Therefore, to control construction waste flow efficiently, construction wastes are classifies first combustible, incombustible, mixed combustible, incombustible and etc. in this study. The combustible waste is consisted refuse wood, plastics, fiber and etc. and incombustible waste contains refuse concrete, asphalt, and etc. Mixed construction is construction waste that can not separate from mixed waste bulk with different kinds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.4
• /
• pp.32-39
• /
• 1986

A strain of Aspergillus niger CAD 1 which produces considerable amount of beta-galactosidase was selected from extracellular beta-galctaosidase producing fungi isolated from soil. Optimal conditions for the enzyme from Aspergillus niger CAD 1 were the growth in wheat bran supplemented with 0.5% skim milk powder at $30^{\circ}C$ for 72 hrs. The crude enzyme was purified 1,387 fold through DEAE-cellulosc and Sephadex G-100 chromatographr and its recovery was 6.2%, The optimal pH and temperature for the purified enzyme were pH 4.5 ana $45^{\circ}C$, respectively. The Km and Vmax on ONPG were $3.57{\times}10^3M$ and 33.0 unit/mg protein, whereas those on lacose were $83.3{\times}10^3M$and 15.33 unit/mg protein, respectively, The activation energy for the enzyme was 9,900 cal/mol and the enzyme had no metal ion requirement for its activity and stability. The hydrolysis of lactose in skim milk, 4.8% lactose solution and acidic whey were 65%, 70% and 78% after 10 hrs incubation at $45^{\circ}C$, when 182 units of the enzyme were used 50ml of the substrate solutions.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.189-195
• /
• 2009

$\beta-Ga_{2}O_{3}$ nanorods were synthesized by chemical vapor deposition method using nickel-oxide nanoparticle as a catalyst and gallium metal powder as a source material. The average diameter of nanorods was around 160 nm and the average length was $4{\mu}m$. Also, we confirmed that the synthesis of nanorods follows the vapor-solid growth mechanism. From the results of X-ray diffraction and HR-TEM observation, it can be found that the synthesized nanorods consisted of a typical core-shell structure with single-crystalline $\beta-Ga_{2}O_{3}$ core with a monoclinic crystal structure and an outer amorphous gallium oxide layer. Li/$\beta-Ga_{2}O_{3}$ nanorods cell delivered capacity of 867 mAh/g-$\beta-Ga_{2}O_{3}$ at first discharge. Although the Li/$\beta-Ga_{2}O_{3}$ nanorods cell showed low coulombic efficiency at first cycle, the cell exhibited stable cycle life property after fifth cycle.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.121-127
• /
• 2016

This study analyzed the structural and electrical characteristics of an iron fittings type Corrugated Stainless Steel Tubing (CSST) damaged by the Primary Current Injection Test System (PCITS). CSST consists of cladding, tube, nuts, clamp ring, flare cap, socket, and ball valve. For an evaluation of the dielectric withstand voltage, the area between the live part and non-live part of the CCST shall withstand a voltage of 220 V AC for one minute. For an evaluation of the insulation performance by 500 V DC, it is required that the insulation exceed more than $1M{\Omega}$ before the temperature rise test, $0.3M{\Omega}$ after the test. Although the average resistance of the product was $11.5m{\Omega}$, that of the product damaged at a current of 130 A by the PCITS was $11.50m{\Omega}$. Furthermore, parts of the cladding were melted and black smoke appeared when a current of 130 A applied for 10 s. After 60 s, most parts were heated and turned red. At 120 s, the parts that turned red had widened. Although it did not form a normal distribution because the P value was 0.019 with a confidential interval of 95%, it revealed outstanding characteristics with an AD (Anderson-Darling) value of 0.896 and a standard deviation of 0.5573.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.25-31
• /
• 1969

The characteristics of crude enzyme produced from Trichoderma viride($O_2-1$) which isolated from half spoiled Locust acacia wood (Robinia Pseudacacia Linne) were examined in this paper. The results obtained were summarized as follows: 1) As a results of enzymatic action on several cellulose substrate it was found that there were some sorts of cellulase in crude enzyme. 2) The activity of C.M.C. ase and ${\beta}-glucosidase$ were decreased in accordance with increasing concentration of substrate, and filter paper saccharifying enzyme relatively increased in accordance with increasing concentration of substrate and enzyme in couse of time. 3) The optimal pH of each enzyme was 5.0 and the range of stability on pH generally from 3 to 6. 4) In disintegrating activity on filter paper, in decomposing activity on C.M.C. and $p-nitrophenyl-{\beta}-D-glucoside$, and in saccharifying activity on filter paper, the optimal temperatures were $50^{\circ}C.,\;60^{\circ}C,\;and\;65^{\circ}C$. 5) The order of stability on temperature was as follow; saccharifying activity on filter paper decomposing activity on C.M.C. disintegrating activity on filter paper>decomposing activity on $p-nitrophenyl-{\beta}-D-glucoside$. 6) The activity of the enzymes was inhibited with mercuric and silver ion, and activated with potassium.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.8-16
• /
• 1996

The ${\alpha}-amylase$ of Alternaria alternata was purified through ammonium sulfate precipitation, dialysis and Sephadex G-100 column chromatography. One single band was obtained in SDS-polyacrylamide gel electrophoresis. The optimum pH for enzyme activity was 5.0 and the enzyme activity was maintained at $3.6{\sim}7.0$pH range. The optimum temperature for ${\alpha}-amylase$ activity was $40^{\circ}C$ and 71% of the activity was still maintained until 30 min after heating at $80^{\circ}C$. The ${\alpha}-amylase$ was slightly activated by $Mn^{2+},\;Zn^{2+}\;and\;Sn^{2+}$, but inhibited by $Ba^{2+},\;Pb^{2+},\;Co^{2+}\;and\;Ag^{1+}$. The $Hg^{2+}\;and\;Ag^{2+}$ slightly inhibited the activity of the enzyme at concentrations of $10^{-3}\;and\;10^{-4}M$. The Michaelis constant $(K_m)$ to soluble starch was $6.50{\times}10^{-2}M$ and inhibition constant $(K_i)$ by the 1mM EDTA was $8.0{\times}10^{-2}M$. The inhibition of this enzyme by EDTA was competitive one.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.313-324
• /
• 2017

Tsogttsetsii area, an intrusive complex associated with Cu mineralization, is located in the South Gobi, Mongolia. We performed the cross geochemical and extended exploration survey in Tsogttsetsii area. Cu mineralization in Tsogttsetsii area is porphyry Cu type related with alkali granite intruded in Late Carboniferous to Early Permian. In the concentrated occurring to malachite appears extensively prophylitic alteration zone having a chlorite and epidote. As results of the survey, Cu contents of potable XRF and of chemical composition for altered rocks ranges 1.08 to 18.3% in the 30 points and 1.08 to 32.9% in the 13 points, respectively. Ore minerals identified in XRD analysis and polarizing microscope that samples of copper oxides were composed mainly of malachite, azurite, permingeatite and cuprite and the other minerals are pyrite, chalcopyrite, pyrargyrite, dickite, calcite, chlorite and epidote. Mineralization can be considered occurring to selectively some granite of the surrounding aplite and faults in the only upper part coming up the hydrothermal solution of the remaining residual magma after the aplite intrusion.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2010

In the present work, an electrowinning process in the LiCl-KCl/Cd system is considered to model and analyze the electrotransport of the actinide and rare-earth elements. A simple dynamic modeling of this process was performed by taking into account the material balances and diffusion-controlled electrochemical reactions in a diffusion boundary layer at an electrode interface between the molten salt electrolyte and liquid cadmium cathode. The proposed modeling approach was based on the half-cell reduction reactions of metal chloride occurring on the cathode. This model demonstrated a capability for the prediction of the concentration behaviors, a faradic current of each element and an electrochemical potential as function of the time up to the corresponding electrotransport satisfying a given applied current based on a galvanostatic electrolysis. The results of selected case studies including five elements (U, Pu, Am, La, Nd) system are shown, and a preliminary simulation is carried out to show how the model can be used to understand the electrochemical characteristics and provide better information for developing an advanced electrowinner.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.130-134
• /
• 2018

In the past few years, various solder compositions have been a representative material to electronic packages and surface mount technology industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the low Ag composition have been reported because of recent rapid rise in Ag price. In this study, Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag-0.5Cu solder bar samples were fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, XRF, optical microscope, FE-SEM and EDS. The fabricated solder samples were composed of ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ and ${\eta}-Cu_6Sn_5$ phases.