• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.183-184
• /
• 2011

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.11a
• /
• pp.183-184
• /
• 2016

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.279-282
• /
• 2004

본 논문에서는 자기저항 센서를 이용하여 자율주행 시스템에서 필요로 하는 자석의 종류에 따른 자계의 특성을 분석하였다 분석결과 거리에 따라 자계의 특성이 변화하고, 자석에 근접할수록 자계의 변화가 급격하게 나타난다. 센서가 자석에서 멀어질수록 지자계의 값에 가까워진다 또한 페라이트자석 보다 네오디뮴 자석의 자계특성이 우수함을 보였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1151-1158
• /
• 2011

Proximity magnetic sensor is able to detect the object target accurately in close range and it has been widely used in the underwater guided weapon system because there is no countermeasures from the target. In order to increase the damage of target by shock wave due to explosion of the underwater guided weapon system, the maximum detection range of the proximity magnetic sensor needs to be increased. In this paper, we describe the techniques of the optimum transmitting and receiving coils design using the Finite Element Method for the output power enhancement of the transmitter and the sensitivity improvement of the receiver. Finally, the proposed design techniques of the transmitter and the receiver were verified using a experimental setup and a prototype.

• 전기의세계
• /
• v.43 no.5
• /
• pp.44-47
• /
• 1994

자기부상열차의 효율적인 추력제어 및 안전성 높은 운행을 위해서 고성능의 속도/위치 검출 시스템이 중요한 역할을 한다. 일반열차는 바퀴가 선로에 접촉하여 주행하므로 차축의 회전속도를 측정해서 열차의 선로위를 일정한 간격을 두고 부상하여 주행하므로 비접촉식 측정방법을 사용해야만 한다[1-5]. 특히, 고속으로 주행하는 자기부상열차의 속도를 측정하기 위해서는 응답속도가 빠른 센서시스템을 개발하며, 또한 열차주행에 수반되는 자기장의 영향을 극소화하도록 센서시스템을 설계해야만 한다. 본고에서는 전형적인 자기부상열차인 일본의 HSST 시스템(주행속도 100km/h)과 독일의 Transrapid 시스템(주행속도: 400km/h)에 적용되고 있는 속도/위치 검출 시스템의 작동원리를 상세히 설명한다. HSST 시스템은 유도무선(inductive radio system) 방법을 이용하고 Transrapid 시스템은 와전류근접센서(eddy-current proximity sensor)를 이용한다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.90-94
• /
• 2002

This paper is related to remote meter-reading using magnetic sensor. Scan system which is developed recently has week point of temperature, humidity, dust, oscillation To solve these problems, this study used magnetic action to measure the consumption of gas. Gas consumption was detected by interaction of a permanent magnet and hall element. Permanent magnet was pasted on rolling change-gear in normal gas meter and hall sensor was pasted on the external wall of normal gas meter. This experiment proved high accuracy and wasn't influenced by temperature, humidity, oscillation and dust

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.867-868
• /
• 2013

본 논문은 물류창고와 같은 실내 공간에서 RFID와 초음파 센서등을 이용하여 이동로봇이 자율적으로 자신의 위치를 파악하고 관리자가 지정한 목표 물체를 인식하여 간단한 업무를 보조할 수 있는 기법을 제안한다. 실내공간엔 RFID를 지면과 목표물체에 설치하고 로봇은 RFID의 리더기와 물체 접근시 활용이 가능한 추가적 센서를 갖춤으로써 이동시 자기 위치를 실시간으로 파악하고 물체로부터도 고유정보를 얻는다. 초음파 센서 신호의 귀환시간을 활용하여 근접한 물체와의 상대 거리를 추출하고 바닥의 RFID로부터 이미 획득한 자기 위치를 조합하여 목표 물체의 절대 위치를 구한다. 이는 이동 로봇을 중심으로 한 경로지도를 실시간으로 작성하며 동시에 실내의 이동 가능 구조 및 목표 물체의 파악이 가능하여 이동로봇의 자율적 탐색을 위한 최적 경로 계획 수립에 활용 가능하다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.231-234
• /
• 2007

The magnetic sensor using electromagnetic principle. which transfers magnatic into electric. is the electric component.It has been widely applied to the industry, university and the reseach. However there are some problems. Not only the korean domestic sensor manufacture skills are still lower then the advanced manufacture's but also production of sensor is not well organized yet. Due to cahnging excitation cvurrent, excitation freq and the rate magnetic permeability core, there sometimes would be distorted phenomena or loaded phenomena which result in limited measurment range. Therefore, the signal conversion device should support to receive undistorted and nice output. This paper focuses on both the design of signal transform circuit using inductive proximity sensor and the signal transfer equipment (Z device) which detects thickness of painted material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.895-901
• /
• 2016

Nowadays, the axle counter has been developed to the wide range of the track circuit blocks as well as the wheel detection device. The axle counter, as becoming an important device for the high speed railway, must be guaranteed in accordance with the safety. With considering the safety and the high speed, performance evaluation a wheel detection sensor is described in this paper. To increase the safety, digital proximity sensor instead of analog is employed in the wheel detection sensor. Therefor the wheel detection sensor can minimize noisy signals caused by the harsh railway environments. And, to meet the high speed railway requirements, the performance of the wheel detection sensor is also successfully verified using the speed simulator at the velocity 500Km/h.