• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.527-533
• /
• 2005

Axisymmetric modeling of the nuclear containment building has been often employed in practice to estimate structural behavior for the axisymmetric loadings, where the axisymmetric approximation is required for the actual non-axisymmetric tendon arrangements in the dome. In the preceding companion paper, some procedures are proposed for the domestic CANDU and KSNP type containments that can implement the actual 3-dimensional tendon stiffness and prestressing effect into the axisymmetric model. In this paper, the proposed schemes are verified through some numerical examples comparing the results of the actual 3-dimensional model with those of some axisymmetric models. The results of the proposed axisymmetric analyses show relatively good agreements with the actual structural behavior especially for the CANDU type. Also, it is shown that proper level of the prestressing in a hoop direction plays an important role to predict the actual prestressing effect in the axisymmetric dome modeling. Finally, correction factors are discussed that can revise some approximations introduced in the derivations.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.46-51
• /
• 2004

his paper presents a novel design technique for the TS fuzzy classifier via linear matrix inequalities(LMI). To design the TS fuzzy classifier built by the TS fuzzy model, the consequent parameters are determined to maximize the classifier's performance. Differ from the conventional fuzzy classifier design techniques, convex optimization technique is used to resolve the determination problem. Consequent parameter identification problems are first reformulated to the convex optimization problem. The convex optimization problem is then efficiently solved by converting linear matrix inequality problems. The TS fuzzy classifier has the optimal consequent parameter via the proposed design procedure in sense of the minimum classification error. Simulations are given to evaluate the proposed fuzzy classifier; Iris data classification and Wisconsin Breast Cancer Database data classification. Finally, simulation results show the utility of the integrated linear matrix inequalities approach to design of the TS fuzzy classifier.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.138-143
• /
• 2006

This paper presents intelligent digital redesign method for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also, by using the bilinear and inverse bilinear approximation method, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs). Finally, a TS fuzzy model for the chaotic Lorentz system is used as an . example to guarantee the stability and effectiveness of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1006-1013
• /
• 2008

CZZ (Concatenated Zigzag) Code is a class of fast encodable LDPC codes. In the case that LDPC codes including CZZ codes have short length, short cycles seriously affect the code performance. In this paper, we construct CZZ codes using various degree-2 polynomial interleavers which eliminate cycles of length 4 and through simulation, compare the performance of these CZZ codes and turbo codes in many different fading channels. Especially, quasi-static fading channel, block fading channel, uncorrelated fading channel, and correlated fading channel are considered. Since CZZ codes show similar performance as turbo codes, they can be used in the next generation wireless communication systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1095-1103
• /
• 1999

Presently, the retractable phone with a whip antenna composed of a helix and a monopole is most widely used for cellular mobile communications. However, since the length of the monopole is usually about λ/4, the strong radiated electric fields are produced in the region where the auricle of a head is contacted directly. This field distribution results in high specific absorption rates(SAR's) in the head. In this paper, SAR distributions and local SAR values for the inversely shaped phone(ISP) whose antenna arrangement is opposite to the original retractable phone(ORP) are compared with those for the ORP. This phone is accomplished by mounting the $\lambda$/4-whip antenna on the bottom, not on the top of the handset. The time-averaged field distribution in a computational space including a human model and a phone model is computed using the finite-difference time-domain(FDTD) method. SAR distributions and local SAR values for these phones are calculated with the field distributions. An anatomical head model and an approximate hand model were used to consider a real situation. From the analyzed data, it is shown that this arrangement of the antenna considerably reduces the spatial peak SAR in a human head.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1037-1040
• /
• 2005

In this paper, we analyze the performance of high data rate wireless personal area network (HDR-WPAN) system using multiple antenna scheme, space-time block code in fading channel. Multiple antenna technique is used to improve the error performance by combining the receive signal through multiple receive antenna. Space-time block code is a space-time diversity scheme which can obtain the maximum space diversity gain and easily implements a ML receiver via a simple process. HDR-WPAN system using space-time block code obtain about 14dB diversity gaint at BER 10$^{-5}$ in multipath fading channel. From the simulation result, We confirm that HDR-WPAN system adopting space-time block code has reliable communication even low power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1197-1209
• /
• 2016

As Indoor Positioning System demands due to increased penetration and utilization of smart device, Indoor Positioning System using Wi-Fi or BLE(Bluetooth Low Energy) beacon takes center stage. In this paper, a terminal location of the user is calculated through Microscopic Trilateration using RSSI based on BLE. In the next step, a fingerprinting map appling approximate value of Microscopic Trilateration increases an efficiency of computation amount and energy for Indoor Positioning System. I suggest Indoor Positioning Algorithm based on BLE fingerprinting considering efficiency of energy by conducting precise Trilateration that assure user's terminal position by using AP(Access Point) surrounding targeted fingerprinting cells. And This paper shows experiment and result based on An Suggesting Algorithm in comparison with a fingerprinting based on BLE and Wi-Fi that be used for Indoor Positioning System.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.19-33
• /
• 2002

A numerical method to efficiently secure necessary design informations of the hydraulic characteristics of rubble mound breakwater was attempted here. The method combines the exterior wave field with the interior wave field which is formulated incorporating porous media flow inside the breakwaters. An approximate method based on the long wave assumption was used for the exterior wave field while a boundary element method was used for the interior wave field. A hydraulic experiment was also performed to verify the validity of the numerical analysis. The numerical results were compared with experimental data and results from existing formulae. They generally agreed in both reflection and transmission coefficients. The calculated pore pressures also showed a similar pattern with experimental data, even if they gave some significant differences in their values fur some cases. The main cause of such differences can be attributed to the strongly nonlinear wave field occurring on the frontal slope of the breakwater. The direct input of dynamic pressures(measured from hydraulic experiment) into the numerical method was suggested as a promising method to enhance the predictability of pore pressures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.194-194
• /
• 2012

본 연구에서는 자연하천에서 Rhodamine-WT를 이용하여 추적자 실험을 수행하고 이를 바탕으로 오염사고대응예측모델에 대한 검증을 실시하고자 하였다. 최근 국내에서는 다양한 형태와 규모의 수질오염사고가 매년 수십건 이상 발생하고 있으며, 따라서 수치모형 기반의 수질오염 사고 대응 예측시스템에 대한 높은 신뢰성이 요구되고 있다. 수질사고에 노출되어 있는 지표수를 각종 용수로서 안전하게 공급하기 위해서는 정확한 수질예측이 필수적이며, 이를 위해서 수십 년간 연구되어 온 수질모델을 오염사고 대응예측시스템에 적합하도록 정확성과 신뢰성을 갖추기 위한 연구가 진행되어야 한다. 수치 모형을 이용한 물질의 이송 및 확산 모의에서는 오염물질 도달시간과 확산 농도를 결정하는 것이 가장 중요한 요소이므로 이송 및 확산 모의에 대한 검증 기법 개발 및 적용이 필요하다. 본 연구에서는 낙동강수계 지류하천인 감천에서 추적자 실험을 4회 실시하여 측정한 수리량과 농도 실측치를 이용하여 분산계수를 종 횡분산계수 산정이 가능한 2차원 유관추적법을 적용하여 산정하였다. 각 단면에 유속은 ADV-3차원 유속계인 Flow-Tracker를 사용하여 도섭으로 측정하였으며 하천의 흐름 방향의 직각으로 측선을 설치하고 펌프를 이용하여 채수를 한 다음 Rhodamie WT의 농도를 측정하였으며 측선의 위치 보정은 GPS를 통하여 보정하였다. 측정 자료를 이용하여 2차원 유관추적법으로 분산계수를 산정한 결과 각각의 측선에 따라서 다소 차이가 발생하였으며, 일부 구간에서는 이론식으로 계산한 분산계수와 근사한 값이 나타났다. 이는 사주가 매우 발달하고 만곡이 많은 실험구간의 특성상 Elder와 Fischer 식으로 계산한 값과 차이가 발생할 가능성이 높은 구간이기 때문인 것으로 판단된다. 또한 하폭에 대한 수심비가 커질수록 분산계수도 증가하고 평균유속에 대한 전단유속에 비에 비례하는 것으로 나타났다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.62-73
• /
• 2001

The interest in evaluation of structural intensity arises for practical reasons, because net energy flow distribution offers information of energy transmission path, positions of sources, and sinks of vibration energy. In this paper, structural intensity analysis of local ship structures using finite element method(FEM) is carried out. The purpose of this analysis is to evaluate the relative accuracy according to mesh fineness. The structural intensity of unstiffened and stiffened plates varying their mesh fineness is analyzed and the results are compared with those obtained by the assumed mode method. As results, the proper mesh size in qualitative/quantitative structural intensity analysis of plate structures is proposed. In addition, the propagation phenomenon of vibration energy is investigated for the thickness-varying flat plate, L-type plate, and box-girder structures.