• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.155-160
• /
• 1998

EM tomography technique has been developed. The algorithm used the extended Born approximations for forward modeling and reconstructed a conductivity image by a smoothness constraint least squares inversion method. Observed data, the vertical components of secondary magnetic fields, were simulated with the 3-D integral equation code. The results showed that the location of anomalous body could be imaged very well, but conductivity of the body was lower than real one and the vertical resolution was much higher than the horizontal resolution.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1423-1431
• /
• 2001

Based on the exponential intervening variable, a new two-point approximation method is presented. This introduces the shifting level into each exponential intervening variable to avoid the lack of def inition of the conventional exponential intervening variables due to zero-or negative-valued design variables. Then a new quadratic approximation whose Hessian matrix has only diagonal elements of different values is proposed in terms of these intervening variables. These diagonal elements are determined in a closed form that corrects the typical error in the approximate gradient of the TANA series due to the lack of definition of exponential type intervening variables and their incomplete second-order terms. Also, a correction coefficient is multiplied to the pre-determined quadratic term to match the value of approximate function with that of the previous point. Finally, in order to show the numerical performance of the proposed method, a sequential approximate optimizer is developed and applied to solve six typical design problems. These optimization results are compared with those of TANA-3. These comparisons show that the proposed method gives more efficient and reliable results than TANA-3.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.223-230
• /
• 1999

A conventional sliding mode control approach is often impractical or difficult when it is applied to high order process b because the number of tuning parameters in the sliding mode controller increases with the order of the plant. C Camacho(l996) proposed a design method of a fixed structure sliding mode controller based on a first order plus dead t time approximation to the higher-order process. But, his method has such problems as chattering, over‘shoot, and c command following due to the Taylor the approximation en‘ors for the time delay term of the first order model. In this p paper, a new design technique for a sliding mode controller based on the modified Taylor approximation considered a w weight is developed to improve the Camacho's problems.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.2
• /
• pp.83-93
• /
• 2023

Trapezoidal corrugated plates are often treated as orthotropic plates to simplify the modelling of the corrugation. However, this simplification is not valid at high frequencies in which the localized vibration within the parts of corrugation takes place. In this study, the vibrational and acoustical characteristics of corrugated plates are investigated up to high frequencies by means of the wavenumber domain numerical approach. Based on the findings from this numerical analysis, an approximate method to predict vibro-acoustic characteristics of corrugated plates is proposed. This approximate model consists of four equivalent plates which can represent global and local behaviours of corrugated plates. The radiation efficiency of corrugated plates is predicted from the approximate model and validated through the comparison with those of the numerical method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.922-928
• /
• 2007

This paper presents the fast adaptive algorithm which applies an approximation scheme into RLS algorithm. The proposed algorithm(D-RLS) derives a QRD RLS algorithm derivation process from RLS algorithm recursively. D-RLS has the similar pattern as the algorithm having the approximation that input signals are separated respectively. Computational complexity of D-RLS is O(N), fewer than $O(N^2)$. To evaluate performance of proposed algorithm, we use the system identification method of FIR and Volterra system. And, finally, we can show D-RLS has an excellent performance.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1093-1101
• /
• 2009

Quantile regression has become a more widely used technique to describe the distribution of a response variable given a set of explanatory variables. This paper proposes a novel modelfor quantile regression using doubly penalized kernel machine with support vector machine iteratively reweighted least squares (SVM-IRWLS). To make inference about the shape of a population distribution, the widely popularregression, would be inadequate, if the distribution is not approximately Gaussian. We present a likelihood-based approach to the estimation of the regression quantiles that uses the asymmetric Laplace density.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.602-606
• /
• 2005

A systematic procedure of probability analysis for general distributions is developed based on the first four moments estimated from polynomial interpolation of the system response function and the Pearson system. The function approximation is based on a specially selected experimental region for accuracy and the number of function evaluations is taken equal to that of the unknown coefficient for efficiency. For this purpose, three error-minimizing conditions are proposed and corresponding canonical experimental regions are formed for popular probability. This approach is applied to study the stochastic properties of the performance functions of a MEMS structure, which has quite large fabrication errors compared to other structures. Especially, the vibratory micro-gyroscope is studied using the statistical moments and probability density function (PDF) of the performance function to be the difference between resonant frequencies corresponding to sensing and driving mode. The results show that it is very sensitive to the fabrication errors and that the types of PDF of each variable also affect the stochastic properties of the performance function although they have same the mean and variance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.628-630
• /
• 2004

Distributed Denial of Service(D-DoS) 공격을 차단하기 위해서는 AS(Autonomous System) 경계 라우터에 필터를 설치하는 것이 필요하다. 필터가 설치되는 라우터의 개수를 최소로 하는 Vertex Cover(VC)--모든 edge를 커버하는 Vertex의 모임--을 찾아내는 방법은 NP-complete 문제가 된다. 따라서 Vertex Cover(VC) 근사기법 중에서 Greedy 알고리즘과 Approximated VC 알고리즘에 대해 Vertex Cover(VC)을 찾아내는 방법을 적용하여 실험하였다. Vertex Cover(VC)를 찾을 경우 Worst case에서 이론상 VC수의 최대 2배의 Vertex Cover(VC)를 찾아낼 수 있는 Approximated VC 알고리즘의 장점과 적은 수의 Vertex Cover(VC)로 모든 edge를 커버할 수 있는 Greedy 알고리즘［7］의 장점을 모두 갖춘 Vertex Cover(VC) 근사 기법을 구현하였다. NS-2를 이용한 실험 결과, 제안된 알고리즘은 Greedy 알고리즘보다 Vertex Cover를 찾아가는 단계 수에 따른 커버되는 층 노드 수를 비교하였을 때. 전체 노드의 75%를 커버하는데 24번의 단계가 필요하여 Greedy 알고리즘의 40개 보다 40%의 단계의 수적인 감소가 일어났으며 전체노드의 90%를 커버하는데 38%의 단계 개수의 감소가 일어났다. 실험으로 제안된 알고리즘이 Vertex Cover(VC) 톨 찾아가는 단계 측면에서 좀더 빠르게 AS 경계 라우터에 필터를 설치하여 D-DoS에 효율적으로 대처해 나갈 수 있음을 확인할 수 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.54-63
• /
• 2007

This paper is proposed a novel method that computed approximately maximum power of photovoltaic system and solar tracking method. Proposed novel is linear reoriented coordinates method(LRCM), this paper is proposed new mathematical dynamic model using LRMC and DC dynamic equation. LRCM has the advantage that is decreased calculating time, decides optimal voltage and maximum power that generates continually. Furthermore solar tracking method is improved over 50[%] photovoltaic efficiency than fixed method. This paper is proposed MPPT using LRCM and solar tracking method using program method that is adequate domestic conditions, prove verify of proposed method through experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.660-665
• /
• 2002

일반적으로 유한요소 모델로부터 구한 해석결과는 대상 구조물의 모드 실험결과와 오차를 보인다. 이러한 오차로 인해서 유한요소 모델의 효용성에 한계가 발생하게 되면, 모델의 신뢰성을 높일 수 있도록 모델을 보정하는 절차가 필요하다. 유한요소 모델 개선은 이러한 오차를 줄이기 위해서 유한요소 모델을 변경하는 체계적인 접근법이다. 유한요소 모델에서 변경할 수 있는 매개변수의 개수는 실험결과의 개수보다 훨씬 많으므로 실험결과와 일치되는 개선된 모델의 수는 무한하다고 할 수 있다. 그러나, 개선된 유한요소 모델이 물리적 타당성을 갖도록 매개변수의 선택과 변경에 제한을 주면 초기 유한요소 모델에 비해서 실험결과와의 오차가 개선된 근사해만 존재하게 된다. 따라서, 모델 개선 과정을 통해서 구한 개선된 모델은 오차의 평가기준 또는 목적함수에 따라서 정해진 다양한 근사해 중 하나이다. 기존의 모델 개선 방법에서는 실험결과와의 오차를 나타내는 단 하나의 평가기준 또는 목적함수를 사용하고 이를 최소화하는 모델을 구한다. 최적화 결과를 얻기 전에는 사용된 평가기준이 타당한지 검토할 수 없으므로 대부분의 경우, 시행착오 방법으로 목적함수를 설정하게 된다. 본 논문에서는 이러한 문제점을 해결하기 위해서 다목적 최적화 개념을 이용한 평가기준을 소개하고 특히, 대화식 다목적 최적화 기법을 이용하여 유한요소 모델을 개선한다.