• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.516-522
• /
• 1998

In this study, a water adsorbent was synthesized by radiation grafting of acrylic acid and multifunctional monomers such as 1,2-propanediol dimethacrylate (PDMA) and 1,1,1-trimethylolethane triacrylate (TMETA) onto cellulose and its subsequent treatment with 5% NaOH. Its absorbency on $H_2O$ and 0.9 % NaCl aqueous solution was examined. The highest absorbency on water and on 0.9% NaCl aqueous solution was obtained from the addition of 0.75 vol % PDDMA and of 1.0 vol % TMETA onto acrylic acid solution, respectively. The absorbency of commercial hygienic band on water and NaCl aqueous solution was 21 g/g and 22 g/g, respectively. However, that for acrylic acid-grafted cellulose including TMETA was 298 g/g and 54 g/g, respectively.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.48-57
• /
• 2014

In this study, we have investigated the influence of the nature of solvent on the grafting reaction of maleic anhydride onto polyethylene wax obtained as a by-product in a high density polyethylene plant. The results show that the grafting ratio in xylene as a solvent was higher than toluene. This is because xylene has excellent monomer solubility, swelling property and miscibility. It has been also observed that grafting degree shows an initial jump in percentage of grafting with increasing amount of solvent, from 0% v/w to 200% v/w giving maximum grafting in 200% v/w and then slightly decreases on further increase in the amount of solvent and becomes almost constant. It can be also seen that gel content was not formed under the use of solvent. It means that solvent prevented cross-linking reaction due to chain transfer reactions to solvent molecules. Studies of melt viscosity at $140^{\circ}C$ showed that viscosity increased after grafting of maleic anhydride onto polyethylene wax.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.306-313
• /
• 2000

Polycaprolactone (PCL) macromer containing terminal methacrylate group was synthesized by ring-opening polymerization. The number average molecular weight of PCL macromer was 11600 g/mole and polydispersity index was 1.09. The synthesized PCL macromer was copolymerized with styrene by stable free radical polymerization using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO), benzoyl peroxide, and well-defined poly(styrene-g-caprolactone)s were synthesized. The synthesized copolymers was characterized by $^1$H-NMR and gel permeation chromatography equipped with multiangle laser light scattering detector. Thermal properties of graft copolymers were investigated by DSC.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.316-320
• /
• 1976

Based on the results of graft copolymerization to proteins, an attempt is made to derive the rate equations to explain the mechanism of Ce(IV) ion-initiated graft copolymerizations. In this system the oxidative termination by Ce(IV) $[R{\cdot}+ Ce(IV) ${\rightarrow}$ R(inert) + Ce(III) + H^+]$ is considered characteristic particularly in higher concentration of Ce(IV) ion. The change in the mode of termination reactions with change in Ce(IV) ion concentration makes possible the presence of an optimum Ce(IV) ion concentration for maximum graft copolymerization yield. This effect is reflected in presently derived equations.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.303-309
• /
• 2006

In this study, functional anion-exchange membranes have been prepared and characterized to improve the permeation fluxes of the anion and urea for peritoneum dialysis. They were prepared by UV and radiation graft polymerization methods. The separation-membrane prepared by UV graft polymerization showed the highest grafting degree when HEMA and VBTAC were mixed by 1:2 ratio. However, the grafting degree decreased slightly at compositions above the 1:2 ratio because of the disruption of UV penetration caused by build-up of homopolymer. In the case of photo-initiator, the grafting degree increased up to 0.2 wt%, above which it decreased to a small extent. For the two membranes prepared by radiation graft polymerization, the VBTAC/HEMA membrane showed 96% grafting degree for 6 h reaction time and the GMA membrane showed over 100% grafting degree for 2 h reaction time. Anion-exchange membranes were prepared with 113% grafting degree and with DEA and TEA exchange groups. The DEA membrane showed the conversion degree of 70% in 4 h reaction time while the TEA membrane showed 30% in 2 h reaction time. The prepared anion-exchange membranes were permeable to only anions and urea, but not cations.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.10-17
• /
• 2013

Polyolefin-g-poly(t-butylstyrene) as one of the high-temperature polyolefin-based thermoplastic elastomers was synthesized by the graft-from anionic living polymerization from the styrene moieties of the linear poly(ethylene-ter-1-hexene-ter-divinylbenzene) as a soft block to form the hard end blocks, poly(t-butylstyrene). The chemistry of the anionic graft-from polymerization involved complete lithiation of the pendant styrene unit of the soft polyolefin elastomer with sec-BuLi/TMEDA followed by the subsequent graft anionic polymerization of 4-tert-butylstyrene with Mn=10,000~30,000 g/mol. The graft-from living anionic polymerization were very effective and the grafting size increased proportionally with increasing monomer concentration and the reaction times. The synthetic methodology for the multi-hydroxyl chain-end modified polyolefin-g-poly(t-butylstyrene) was proposed by using the thiol-ene click reaction between 2-mercaptoethanol and the polyolefin-g-[poly(t-butylstyrene)-b-high vinyl polyisoprene], which was obtained from the subsequent living block copolymerization using polyolefin-g-Poly(t-butylstyrene) with isoprene. The result indicated that this process produced a new well-defined functionalized graft-type polyolefin-based TPE with high $T_g$ hard block(> $145^{\circ}C$).

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.338-344
• /
• 1998

New type of chitosan derivatives, chitosan-g-MAP, were synthesized by graft copolymerization of mono (2-methacryloyl oxyethyl) acid phosphate (MAP) into chitosan, in order to solubilize chitosan in water. Ceric ammonium nitrate was used as an initiator for graft copolymerization. The optimal conditions for graft copolymerization were determined on the basis of reaction temperature, time, and the concentration of initiator and monomer. The reaction conditions for the highest percentage of grafting were as follows: an initiator concentration, 3.5${\times}$10$\^$-3/ M; monomer concentration, 0.19 M; and reaction temperature, 40$^{\circ}C$ The reaction rate reached the maximum value after 4 hrs of reaction. Antifungal activity was tested against Candida albicans, Trichophyton rubrum and Trichophyton violaceum by using chitosan-g-MAP and two other chitosan samples which have degree of deacetylation of 70% (DA-7) and 90% (DA-90). Their antifungal activities were investigated in weak acidic range. Maximum antifungal activity of them was observed at pH 5.75. Chitosan-g-MAP inhibited thoroughly the growth of Candida albicans and Trichophyton violaceum. Howerver, DA-70 and DA-90 showed higher antifungal activities on Trichophyton rubrum than that of chitosan-g-MAP.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.179-187
• /
• 1982

The copolymerization of N-acryloylpyrrolidone and acrylonitrile was performed in N,N'-dimethylformamide at 50$^{\circ}$C and monomer reactivity ratio was obtained by using IR working curve and Fineman and Ross equation. ($r_1$ = 0.43, $r_2$ = 1.56) It is found that resulting copolymer is good polymeric initiator for anionic graft copolymerization of 2-pyrrolidone. Graft copolymers with polybutylamide (nylon-4) grafts onto poly(NAP-Co-AN) backbone were synthesized and the various effects on the graft copolymerization of 2-pyrrolidone were examined. The rate constants ($K_p$) of graft anionic polymerization at 40 and 50$^{\circ}$C were 2.82${\times}$10 and 2.93${\times}$10(l/mole, min), respectively.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.181-190
• /
• 2014

Melt grafting of itaconic acid (IA) onto an ethylene-propylene-diene terpolymer (EPDM) with various organic peroxide initiators was performed. Finding the optimum mixing conditions and concentration of ingredients is critical for effective grafting and optimum properties of grafted materials. This study focused on the effects of mixing conditions (temperature and time), initiator type/concentration and monomer concentration on the grafting degree and efficiency, melt flow index, and gel content of EPDM-g-IA. The initiator, 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101), appeared to meet for the best grafting degree (1.91%). The grafting degree increased markedly by increasing the amounts of monomer IA and initiator T-101. The grafting degree also increased by increasing mixing temperature and time. The optimum monomer and initiator concentrations and reaction temperature and time were found to be about 5wt%/0.05wt% and $160^{\circ}C$/15min, respectively. It was found that the physical properties of EPDM-g-IA were higher than those of the pristine EPDM.

• Polymer Science and Technology
• /
• v.3 no.6
• /
• pp.481-488
• /
• 1992