• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7A
• /
• pp.1234-1249
• /
• 2001

본 논문에서는 확장 가능한 병렬컴퓨터 시스템의 성능에 중요한 영향을 주는 MIN에서 통신 지연을 개선하기 위한 방법에 대해 고찰하였다. 네트워크의 트래픽이 매우 많거나 고르지 않게 분포되었을 때 개선하기 위한 효율적인 스위칭 방안으로, 본 논문에서 제안된 HWCR 스위칭 방법은 양방향 MIN 상에서 웜홀 라우팅을 수행시 라우팅 경로 상에 패킷들이 충돌이 발생하여 링크가 블럭되었을 때 VCT로 전환하는 방법이다. 각 스위치에 계층적 버퍼를 설치함으로서 더욱 효율적인 라우팅을 할 수 있도록 설계하였다. 이는 VCT 라우팅이 일률적으로 각 스테이지마다 커다란 크기의 버퍼를 부여함에 반하여 매우 Cost-Effective 한 버퍼 할당 방법이다. 이를 정당화하고 버퍼크기와 라우팅시 평균 통신 지연과의 관계를 적정화하기 위해 균일 트래픽 패턴과 여러 가지 비균일 트래픽 패턴 하에서 성능평가를 하였다. 성능결과는 부하가 0.4 일 때 제안된 HWCR 방법이 VCT 라이팅 보다 2-3배의 버퍼가 절약됨을 보여준다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2458-2460
• /
• 2001

단일 로봇을 이용한 물체의 운반은 제어대상이 하나이기 때문에 제어가 쉽다는 장점이 있다. 그러나 로봇의 크기에 비해 물체의 길이가 길어지거나 부피가 커지고 무게가 증가할 경우, 물체의 균형을 유지하기가 힘들고 로봇의 속도가 감소하는 등의 문제가 발생한다. 본 연구에서는 페트리넷의 그래픽적인 모델링 방법을 이용하여 전체 작업을 모델링하여 로봇의 작업 상태를 쉽게 파악할 수 있도록 하였으며 명령체계상에서 발생할 수 있는 오류를 사전에 제거하려 하였다. 또한 시스템을 분산형 구조로 설계하여 시스템을 관리하는 별도의 시스템을 설정하지 않는 대신 퍼지 제어기를 이용하여 두 로봇의 협조 작업을 통해 물체를 운반할 경우 일어날 수 있는 애매한 상황에 대한 문제를 수학적인 모델링이 필요하지 않은 퍼지 제어기의 특성을 이용해 해결하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1095-1104
• /
• 2022

The towing cable plays a role in dropping and salvaging the Towed Array Sonar System (TASS) into the water and transmitting the signal (information) detected by the sonar in the water to the probe or surface ship. The towing cable consists of a heavy cable and a lightweight cable in detail. The towing cable for sonar is characterized by high reliability and durability as the underwater environment deteriorates as the operating depth increases. Due to these restrictions, cases designed and manufactured in Korea are extremely rare. The core technology for towing cable design secured through this study is expected to be used in various ways in the defense industry and the private sector.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.86.1-86.1
• /
• 2010

예비개질기(Pre-reformer)는 중대형 내부개질형 용융탄산염 연료전지(MCFC) 시스템에서 다양한 연료를 사용하기 위한 필수적인 화학반응기이다. 예비개질기는 스택 전단에 설치함으로서 스택 내부의 열균형을 유지하고, 다양한 원료를 연료로 이용할 수 있도록 하며, 황화물로부터 후단의 개질촉매 및 전극촉매를 보호하여 주개질 반응의 부담을 감소시켜 MCFC 시스템의 내구성 향상의 중요한 역할을 한다. 본 연구는 예비개질 반응기 설계에 CFD 모델링을 적용하기에 앞서 파일롯 반응기 내 농도/ 온도 구배를 측정하고자 하는 목적으로 수행되었다. 반응가스로는 천연가스 내 고차탄화수소(C2 이상) 중 상대적으로 높은 농도를 가진 에탄을 이용하였고, MCFC용 예비개질기의 운전특성을 고려하여 비교적 낮은 온도와 높은 수증기/탄소 비에서 단열반응기로 실험을 진행하였다. 향후 본 실험결과를 이용하여 CFD 모델링에 대한 검증을 수행할 예정이며, 하수처리장부생가스(ADG)/ 매립지 가스(LFG)용 MCFC 시스템을 위한 예비개질기 설계에도 적용을 하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1259-1268
• /
• 2002

One of the major goals suggested in distributed system is to improve the performance of the system through the load balancing of whole system. Load balancing among systems improves the rate of processor utilization and reduces the turnaround time of system. In this paper, we design the rule of decision-making and information interchange based on knowledge based mechanism which makes optimal load balancing by sharing the future load state information inferred from past and present information of each nodes. The result of performance evaluation shows that utilization of processors is balanced, the processing time is improved and reliability and availability of systems are enhanced. The proposed mechanism in this paper can be utilized in the design of load balancing algorithm in distributed operating systems.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.75-87
• /
• 2010

Incessant rainfalls in unsaturated soil raises pore water pressure and drops shear stress. Controlling pore water pressure in unsaturated soil prevents pressure increase and leads to slope stability. Laboratory experiment of pore water absorption in soil tank has been conducted for pore pressure decrease in soil slope under artifical rainfall supplied in varying rainfall indensities. Soil slope failure triggers the deepening of the wetting front to critical depth accompanied by decrease in matric suction induced by water infilteration. This paper addresses an experimental design for absorption pipe to prevent pore pressure increase in unsaturated soil slope from heavy rain. It is expected that absorption pipe will be widely used in unsaturated soil slope to strengthen slope stability.

• Food Science and Preservation
• /
• v.17 no.3
• /
• pp.418-424
• /
• 2010

Although the wine industry continues to grow, little empirical research on consumer preferences has been conducted. Thus, our objective was to analyze consumer views on wine attributes. A choice experiment (CE) was designed to detect a marginal willingness to pay for particular characteristics of wine (balance, flavor, color, clarity, and value-for-money). A questionnaire was administered and 286 responses were received. A multinomial logit model was estimated using the maximum likelihood method. The results indicated that balance, flavor, color, clarity, and price were all important to consumers. The CE data revealed that estimates of marginal willingness to pay were 31,899 won/bottle for balance, 23,088 won/bottle for flavor, 3,230 won/bottle for color, and 25,936 won/bottle for clarity. The balance of a wine was most important, and the flavor, clarity, and color were also significant. The results of this work will be of assistance in promoting the domestic wine industry.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.2
• /
• pp.77-91
• /
• 2022

Objective : This study aimed to assess the effects of occupation-based lifestyle intervention programs on older adults in the local community. Methods : Nine community-dwelling older individuals participated in this study using a one-group pre-post design. The occupation-based lifestyle intervention program consisted of 12 group sessions, and one individual session was conducted for seven weeks. Occupational balance, activity occupancy, activity participation, depression, health-related quality of life, and program satisfaction were assessed. Results : The average attendance rate of the nine participants was 10.11 (SD=1.36). Overall occupational balance (p=.012), activity participation status (p=.008), performance (p=.012), and satisfaction with activity participation (p=.008) were increased. Furthermore, the results showed changes in leisure time (p=.008) and rest time (p=.008). Finally, there were some improvements in the overall health-related quality of life (p=.034) and depression scores (p=.012). Conclusions : Occupation-based lifestyle intervention programs positively affected occupational balance, activity occupancy, activity participation, depression, and health-related quality of life in community-dwelling older adults. This research suggests promising benefits and feasibility of the program for community-dwelling older adults.

• The Journal of Korean society of community based occupational therapy
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2013

Objective : This study investigates the impact of the musculoskeletal disorder prevention exercise program designed on the basis of agricultural work posture on the balance ability, Oswestry Disability level, and Psychosocial stress of participants from one rural village in Chungnam area. Method : The exercise program was provided to 21 farmers with musculoskeletal symptoms living in one village in Chungnam area. Such program was performed once a week, 90 minutes per session, for a total of twelve weeks from July 10 to October 11, 2008, and was constructed in a way to increase flexibility and muscular strength, taking agricultural work posture into account. The balance ability, Oswestry Disability Index, and Psychosocial Well-being Index scores were analyzed based on the data of 13 of the farmers who participated in the program for more than eight times and in all of the pre- and post-assessments. Result : Thirteen participants were all women who were 70.55(${\pm}6.78$) years old on average. Most of them were engaged in general dry-filed farming. The parts where they mainly felt the pain were low back(69.2%) and knees(61.5%), and 46.2% responded 'not healthy' to the question on the overall health status. The static balance ability when standing on the right foot significantly increased from the average 9.27(${\pm}5.53$) seconds before intervention to 14.22(${\pm}5.47$) seconds after intervention(p<.05). The Oswestry Disability Index showed a significant change, decreasing from the average 19.84(${\pm}6.89$) seconds to 14.38(${\pm}7.58$) seconds(p<.05). However, there was no change in the Psychosocial Well-being Index. Conclusion : This exercise program that has been conducted for the female farmers who are mainly engaged in the dry-filed farming has contributed to the improvement of their static ability and reduction of their Oswestry Disability Index scores. It is expected that the studies on the effects of the differentiated exercise programs depending on work characteristics will make progress in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.33-42
• /
• 1981

Current standard code for R.C. design consists of two conventional design parts, so called WSD and USD, which are based on ACI 318-63 and 318-71 code provisions. The safety factors of our WSD and USD design criteria which are taken primarily from ACI 318-63 code are considered to be not appropriate compared to out country's design and construction practices. Furthermore, even the ACI safety factors are not determined from probabilistic study but merely from experiences and practices. This study investigates the safety level of R.C. flexural members designed by the current WSD safety provisions based on Second Moment Reliability theory, and proposes a rational but efficient way of determining the nominal safety factors and the associated flexural allowable stresses of steel bars and concretes in order to provide a consistent level of target reliability. Cornell's Mean First-Order Second Moment Method formulae by a log normal transformation of resistance and load output variables are adopted as the reliability analysis method for this study. The compressive allowable stress formulae are derived by a unique approach in which the balanced steel ratios of the resulting design are chosen to be the corresponding under-reinforced sections designed by strength design method with an optimum reinforcing ratio. The target reliability index for the safety provisions are considered to be ${\beta}=4$ that is well suited for our level of construction and design practices. From a series of numerical applications to investigate the safety and reliability of R.C. flexural members designed by current WSD code, it has been found that the design based on WSD provision results in uneconomical design because of unusual and inconsistent reliability. A rational set of reliability based safety factors and allowable stress of steel bars and concrete for flexural members is proposed by providing the appropriate target reliability ${\beta}=4$.