• Microbiology and Biotechnology Letters
• /
• v.7 no.4
• /
• pp.183-190
• /
• 1979

Cadmium ion-tolerant microorganisms were isolated from the sludge and soil of a cadmium ion-polluted area, a zinc mineralized area, in Kyung Sang Pook Do, Korea. A strain, C-7, which showed tile highest tolerance to cadmium ion was selected by screening from 18 cadmium tolerant microorganisms. By the taxonomical characteristics of this strain, it was identified as a variant of Erwinia sp.. The strain grew in a medium cadmium ion up to a concentration of 2, 800 $\mu\textrm{g}$/ml and the maximum intercellular accumulation of Cd$^{2+}$ was measured to be 28.60 mg/g dried cells (57.2％) during incubation in medium containing 50 $\mu\textrm{g}$/ml under aerobic condition at 28$^{\circ}C$ for 24 hour.r.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.92-98
• /
• 2003

The optimum design of Hanyang low speed wind tunnel has been performed to augment flow uniformity and to reduce turbulence intensity of wind tunnel test section have to be known for reliability of wind tunnel test. The non-uniformity and turbulence intensity of Hanyang low speed wind tunnel were measured with Pilot tube and X-type hot-wire probe at various wind speeds. As the results, the non-uniformity decreases as the wind speed increases. The non-uniformity is relatively high in the proximity of the diffuser. The turbulence intensity is a little higher than design requirement in the middle of the test section.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.25-35
• /
• 2018

Resisting strength of ring-stiffened cylindrical steel shell under uniform external pressure was evaluated by geometrically and materially nonlinear finite element method. The effects of shape and amplitude of geometric initial imperfection, radius to thickness ratio, and spacing of ring stiffeners on the resisting strength of ring-stiffened shell were analyzed. The resisting strength of ring-stiffened cylindrical shells made of SM490 obtained by FEA were compared with design strengths specified in Eurocode 3 and DNV-RP-C202. The shell buckling modes obtained from a linear elastic bifurcation FE analysis were introduced in the nonlinear FE analysis as initial geometric imperfections. The radius to thickness ratios of cylindrical shell in the range of 250 to 500 were considered.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.183-186
• /
• 1999

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.102-106
• /
• 1999

In this study, inhomogeneous amplitude modulation effects on the imaging performance a lens system are expermentally investigated by measuring the diffraction OTF. The lens under the test is a binocular objective made in Korea. Inhomogeneous amplitude modulation is carried out by positioning the modulator cross contacted to the lens under test which is illuminated by collimated light beam. The aberration characteristics of the lens under test are examined by caculating the ray-fan through finite ray tracing. The MTFs of the lens illuminated by the homogeneous and inhomogeneous light beam are measured on the Gaussian image plane and compared with one another.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.63-72
• /
• 2011

In recent years, hot-stamped components are more increasingly used in the automotive industry in order to reduce weight and to improve the strength of vehicles. In hot stamping process, blank is hot formed and press hardened in a tool. However, in hot stamping without cooling channel, temperature of the tool increases gradually in mass production thus cannot meet the critical cooling rate to obtain high strength over 1500MPa. Warpage occurs in the hot stamped component due to non-uniform stress state caused by unbalanced cooling. Therefore, tools should be uniformly as well as rapidly cooled down by the coolant which flows through cooling channel. In this paper, optimal design method of cooling channel to obtain uniform and high strength of the component is proposed. Optimized cooling channel is applied to the hot press V-bending process. As a result of measuring strength, hardness and microstructure of the hot formed parts, it is known that the design methodology of cooling channel is effective to the hot stamping process.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.297-303
• /
• 2020

The purpose of this study is to investigate the effects of aerobic exercise and probiotics ingestion on motor learning and body weight in female mice during adolescence. The subjects were divided into six groups of variables, such as non-exercise, moderate, high-intensity exercise, probiotics ingestion, and non-probiotics, and then treated for four weeks. The vertical grid test was conducted before and after the treatment to evaluate motor learning and bodyweight. The high-intensity exercise and probiotics ingestion group showed fastest up, rotation, and down rate than the non-exercise group (p<.001). Also, a group that treated exercise and probiotics tended to record speedier performance than those that performed the only exercise. Comparing weight changes, the weight gain of a group that performed only moderate-intensity exercise was higher than that of a non-probiotics and non-exercise group (p=.032). Taken together, aerobic exercise during adolescence can help improve motor learning, and more efficient motor learning can be achieved when combined with probiotics ingestion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.231-236
• /
• 2006

본 연구에서는 단일 첨두를 갖는 가상의 균일하도구간과 홍수피해가 극심하게 나타나고 있는 낙동강유역에 대하여 Saint-Venant 방정식을 음해적으로 유한차분하여 수치적으로 해석한 수리학적 하도추적을 FLDWAV 모형을 이용하여 수행함으로써 홍수파의 전달양상과 천변저류지의 홍수 저감영향을 분석하였다. 균일하도구간에 대한 적용은 천변저류지의 규모와 운영조건 그리고 설치위치에 따른 홍수 저감영향을 비교검토함으로써 천변저류지의 최적 규모 및 설치위치를 결정하는데 효과적인 참고 자료가 될 것으로 기대된다. 또한 낙동강유역에 대한 적용에서는 낙동강 하천정비 기본계획에 근거한 계획홍수량으로 모의를 수행하였다. 낙동강 유역종합 치수계획 보고서에 제시된 10개의 천변저류지에 대한 모의를 통해 실제 낙동강유역의 홍수 저감영향을 분석함으로써 하천제방 계획시 경제적인 하천 제방단면 결정을 위한 참고 자료 및 효과적인 홍수피해 경감대책 수립을 위한 기초 자료를 제시하고자 한다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.479-484
• /
• 2001

고순도 알루미나 분말에 소결조제로서 MgO를 0ppm 및 500ppm 첨가하여 열분무건조기를 사용하여 준비한 과립을 80$0^{\circ}C$에서 하소를 함으로써 얻어진 과립으로 제작한 소결체의 MgO 첨가량에 따른 미세구조와 꺾임강도에 미치는 영향을 고찰하였다. 또한 시편두께를 50$mu extrm{m}$의 박편으로 가공하여 투광법으로 내부구조도 관찰하였다. MgO를 500ppm 첨가하여 제작한 과립을 180 MPa의 냉간정수압성형성 후 1$600^{\circ}C$에서 소결한 소결체는 상대밀도가 100%에 도달하였고 균일한 결정립성장의 치밀한 미세구조를 나타내었다. MgO를 500ppm 첨가한 시편의 4점 꺾임강도 또한 각 소결온도에서 MgO를 9ppm 첨가한 시편보다 23%-32%정도 높은 강도를 나타내었으며, 특히 소결온도 1$600^{\circ}C$에서는 꺾임강도가 501MPa 그리고 weibull 계수가 20의 고강도이면서 신뢰성이 높은 알루미나 소결체가 얻어졌다. 본 연구에서는 weibull 계수의 값이 높은 시편일수록 내부구조의 결함크기가 작고 이 작은 결함이 시편내부에 균일하게 분포되어 있음을 확인할 수 있었다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.271-272
• /
• 2017

자외선 에너지는 미생물의 DNA를 파괴함으로써 살균 효과를 일으킨다. 자외선 방사로 공기 중 미생물에 대하여 높은 살균력을 얻기 위해선 강한 자외선 강도와, 흐르는 공기가 충분한 시간 동안 강한 자외선에 노출되어야 하므로 균일한 자외선 방사는 매우 중요하다. 기존 UV살균 시스템은 강한 자외선 에너지와 공기의 빠른 이동에 필요한 UV방사의 균일성을 제공하지 않았다. 하지만 HDS의 BioProtector 제품에 사용된 Advanced UV System(AUVS) 반사 캐비티 기술은 매우 높은 수준의 균일성을 생성함으로써 이 문제에 대한 해결책을 제공하며, 미생물 살균에 가장 효과적인 UV파장을 사용하여 6 LOG KILL (100만마리의 미생물 투입시 1마리 이하생존) 수준의 살균 효과를 만들었다.