• Korea journal of population studies
• /
• v.13 no.2
• /
• pp.19-47
• /
• 1990

1720년 경상도 단성진 진내면 소재의 390가구를 대상으로 1970년대 초 케임브리지 대학의 역사인구학 연구소에서 개발한 Laslett-Hammel가구 형태 분석법을 적용하여 본 결과 표9에서 제시된바와 같이 전체가구의 48.9%가 핵가족의 형태이며, 42.1 퍼센트가 대가족으로 밝혀지고 있다. 물론 도표3에서 지적되고 있듯이 5세이하의 인구에 대한 자료가 미비한 상태라 호적 자료만으로 당시의 가구 형태에 대한 정확한 분석이 어렵다고 하드라도 이제까지 일반적으로 믿어져 왔던 대가족 형태의 이조 중기의 종가제도나 일반 서민들의 가구 형태 및 유아가구에 대한 보다 구체적인 연구가 호적 자료에 대한 면밀한 분석으로 가능해질것으로 믿어진다. 역촌, 즉 하류계층의 사람들이 주로 많이 주거하였던 단성진 진내면의 전체 조사 대상 가구의 절반이 핵가족의 형태로 보이고 있는것은 당연한 것으로 받아질수 있겠으나 표6에서 나타내고 있듯이 상류계층에 속하는 양소계층의 경우도 평균 가구 규격 16명중에서 약 13명이 율거유아로 실제 가구의 크기는 가족 구성원수 4명을 넘지않는 핵가족의 형태였을 가능성이 짙음을 알수 있다. 한가지 특이할만한 사항은 상류,중류,그리고 하류 계층 다같이 평균 가족 구성원수가 4명을 넘지 않는다는 점이다. 단성진이 독촌들로 구성되어 있는 만큼 앞으로 상류계층이 밀집되어 있었던 경북 월성군의 양동 지역 향방 자료나 호적 초안자료를 단성진의 자료와 비교 분석함으로써 이조 중기의 가구 형태에 대한 보다 신뢰성 있는 결과를 도출해 낼수 이ㅛ는것이다. 단성진의 자료는 이조 중기의 유아 인구와 유아 가구 형태에 대한 연구에는 귀중한 자료로 앞으로 역사인구학의 방법론 개발에 큰 기여를 할것으로 기대된다.의 핑거를 식별, 추적할 수 있었다.는 경도방향의 해구수가 많았으며, 특히 8월은 1년중 경도방향의 분산이 가장 컸고, 어장중심은 5월에는 3888해구, 6월에는 3884해구, 7월에는 4078해구, 8월에는 4154해구, 9월에는 4146해구, 10월에는 4044해구였다. 3. 어획수온과 어획적수온은 5월에는 $14.0~18.5^{\circ}C,$ $15.0~16.0^{\circ}C,$ 6월에는 $13.5~18.5^{\circ}C,$ $14.5~16.0^{\circ}C,$ 7월에는 $14.0~20.0^{\circ}C,$ $14.5^{\circ}C,$ $19.0^{\circ}C,$ 8월에는 $16.0~21.5^{\circ}C,$ $18.0~20.0^{\circ}C,$ 9월에는 $14.5~22.0^{\circ}C,$ $17.0~18.5^{\circ}C,$ 10월 $14.0~18.0^{\circ}C,$ $16.0~17.0^{\circ}C였다.$ 4. 평균CPUE는 5월에는 3.2kg/sheet, 6월에는 4.5kg/sheet, 7월에는 4.3kg/sheet, 8월에는 5.1kg/sheet, 9월에는 6.4kg/sheet, 10월에는 5.8kg/sheet였다. 5. 한국정부의 1990년 북태평양 오징어 어업감시계획과 실제의 어장형성범위를 비교하면 5월에는 어장이 형성된 21개 해구 가운데 12개, 6월에는 24개 가운데 7개, 7월에는 25개 가운데 4개 해구에서

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.328-335
• /
• 2010

In this paper, an efficient algorithm and area-efficient hardware architecture have been proposed for $2{\times}2$ MIMO-OFDM based WLAN baseband modem with two transmit and two receive antennas. To enhance the performance of the receiver, the efficient timing synchronization algorithm and symbol detector based on MML algorithm are presented. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate, the complexity of the proposed architecture is dramatically decreased. The proposed area-efficient hardware design was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. As a result, the complexity of the proposed modem receiver is reduced by 56% over the conventional architecture.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.176.2-176.2
• /
• 2011

피마자유(Castor oil)는 합성수지, 그리스, 유압용 오일, 윤활기유 등의 다양한 용도로 쓰이는 오일로서 점도가 높고 무색에서 황갈색을 띈다. 피마자유 추출은 압착 착유 또는 용매 추출로 얻게 되며 본 실험에 사용된 오일은 압착 착유한 것으로 매우 진한 갈색을 띄는 정제전 오일을 이용하였다. 실험에 사용된 피마자유의 초기 산가는 1mgKOH/g 이하로 낮은 유리지방산 함량을 보였으며 수분은 0.3%로 전이에스테르화 반응을 위해서는 수분 증발이 필요했다. 피마자유의 바이오디젤 생산을 위해 진행된 물성 분석 항목은 산가, 수분, 인함량, 황함량, 점도, 고형물이며 원료유와 그 바이오디젤에 대해 각각 물성 분석을 실시하였다. 피마자유의 가장 큰 특징은 다른 식물성 오일과는 다르게 오일이 알코올에 녹는 특성이 있으며 이런 이유로 전이에스테르화 반응 후 바이오디젤과 글리세롤이 분리되지 않는 문제점을 갖고 있다. 피마자유를 이용해 제조한 바이오디젤, 즉 지방산메틸에스터의 함량을 분석한 결과 약 90%의 메틸에스터화 반응 전환율을 나타내었으나 국내외 품질규격상의 탄소수 C14~C24:0의 지방산 에스터(fatty acid methyl esters)로 검출되는 바이오디젤의 함량은 10% 미만으로 나타났으며 나머지 90%는 라이신올레익산메틸에스터(ricinoleic acid methyl ester)로 분석되었다. 따라서, 기존의 대두유, 유채유, 팜유, 폐식용유로부터 제조한 바이오디젤과 물성이 매우 상이하고 특히 끊는점(boiling point)과 점도가 높아 경유 대체연료로는 활용이 불가능할 것으로 판단된다. 하지만 기존의 다양한 용도의 오일로 사용하기 위해 정제하는 과정에서 전체 착유 오일중의 약 10%만을 선택적으로 분리하여 바이오디젤 원료로 활용하는 방안은 가능할 것으로 판단된다.

• Journal of the Korean Society for Library and Information Science
• /
• v.30 no.1
• /
• pp.35-48
• /
• 1996

To understand the present states of abstracting and to investigate contents of abstracts, a survey content analysis was done in the field sciences. Of the 102 nation wide scholarly journals examined $54(53\%)$ included abstracts with articles. 33 had abstracts in Korea Among the 34 journals with editorial statements about abstracting only 13 had suggestions about abstract contents. Based on the investigation, 4 disciplines having abstracts mostly was selected and 149 abstracts in the 4 major journals in each discipline were sampled. Complete abstracts were ama;uzed according to 12 variables covering required content elements, unnecessary statements, and writing styles. Statistical characteristics of the abstracts is varied among disciplines and the scope is very wide. Particularly number of paragraph and number of character per abstract is much different from the standards. The content analysis showed $51\%$ of the abstracts were incomplete. $39\%$ of the abstracts did not mention research method used. 59 abstracts included unnecessary statements. Writing stle analysis also showed many faults both in the pronoun abuse and the misuse of voice or tense. Korean author abstracts in social science scholarly journals have deficiencies in linguistic structures as well as in contents and style.

• The Korean Journal of Applied Statistics
• /
• v.24 no.4
• /
• pp.567-573
• /
• 2011

This study develops a predictive model for household water end-uses based on data that have measured household characteristics, housing characteristics and other items, surveyed over 3 years in Korea. However, the measured data was left-skewed and it was not fitted to normal distribution. The parameter estimate were biased when using a multiple regression model. In addition, the results of the testing for the model were usually of significance due to the tiny residual from a large number of observations. In order to solve the problem, we suggested log-normal regression model and Weibull regression model as alternatives. The results of this study can be utilized in the planning stages of water and waste water facilities.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.72-80
• /
• 2020

This paper describes the design and fabrication of a BUC(Block Up-converter) which is a component of a FST (Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. BUC is physically composed of an up-converter module, a high power amplifier module, a receive band suppression filter, a housing, and a cable assembly. It was designed using simulator AWR to satisfy the electrical characteristics of BUC's such as maximum output power, gain, unwanted signal, and intermodulation. The maximum output power and gain characteristics were measured at 43.4dBm and 51.8dB, respectively. The unwanted wave and intermodulation characteristics were -73.5dBc and -31.9dBc, respectively. Of the electrical requirements of Table 1, not only the above four but also all of the items were confirmed to be satisfied.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2020

This paper describes the design and fabrication of a LNB(Low Noise Block downd-converter) which is a component of a FST(Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. LNB is physically composed of an down-converter module, a low noise amplifier module, a transmit band suppression filter, a isolator, a housing, and a cable assembly. It was designed using simulator (AWR) to satisfy the electrical characteristics of LNB's such as gain, noise figure and unwanted signal. The gain and noise figure characteristics were measured at 61.4dBm and 1.37dB, respectively. The unwanted wave was measured at -66.79dBc. Of the electrical requirements of Table 1, not only the above three but also all other items were confirmed to be satisfied.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1112-1120
• /
• 2017

Petroleum products are composed of various types of hydrocarbon compounds. Like other types of liquids, they presented the variation of density and volume according to temperature change. The method of measuring the density of petroleum products in a liquid phase is based on experimental data obtained mainly for each fractionally distilled petroleum product. In this study, the density and volume changes of kerosene and automotive diesel according to temperature change were measured and the property of change were analyzed. The conversion values were calculated using the density volume conversion table proposed by international standard ASTM. In addition, we analyzed the differences between the reference values and the measured values for the temperature changes specified in the domestic metering law.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.33-41
• /
• 2023

As seen in the case of the Boeing 737 Max accident, the proportion of aircraft software is rapidly increasing. However, it is vulnerable to safety issues. In case of domestic aircraft software, to operate a Light Unmanned Aerial Vehicle (LUAV) less than an empty weight of 150 kg, safety certification is required for an Ultra-Light Vehicle (ULV). However, software certification procedure is not included. Since the use of LUAVs has increased recently, software verification is required. This paper proposed a checklist of LUAV software that could be applied to LUAV referring DO-178C, an aviation software certification standard. A case study of applying the proposed checklist to the Model-based Development-based Helicopter Flight Control Computer (FCC) project currently used by domestic and foreign advanced companies and institutions was conducted.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.1-12
• /
• 2004

Recently, the Korea Highway Company is replacing their prepaid plastic cards with a smart card, called $Hipass^{PLUS}$ Card. In order to use $Hipass^{PLUS}$Card in the prepaid payment system, LSAM, which is to store the value into $Hipass^{PLUS}$ Card is needed. LSAM is also responsible to store or retrieve the value from PPSAM. For the safety of Korea Highway electronic payment system, the functionality and security of LSAM should be faultless. This paper developed a test module including the test method, the test checklist, and the test procedure. The test module examines the functionality and security of loading the value from PPSAM to LSAM, retrieving the value from LSAM to PPSAM, and loading the value from LSAM to $Hipass^{PLUS}$ Card. The test module contains the method and the procedure to test the standard items by the test checklists. The test items and test checklists of LSAM was selected under the provision of the specification of Korea Highway Company and ISO standard. The test module evaluates the functionality, the security and the compatibility of LSAM. After the evaluation test of LSAM using the test module, LSAM satisfied the characteristics of the functionality, security, and compatibility.