• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.458-465
• /
• 2018

Purpose: Concrete track that affects on railway safety can detect cracks using image processing technique. However, since a condition of concrete track and surface noisy are obstructed to detect cracks, there is a need for a way to remove them effectively. Method: In this study, we proposed an image processing to detect cracks effectively for Korean railway and verified its performance through experiment. We developed image acquisition system for capture a railway concrete track and acquired railway concrete track images, randomly selected 2000 images and detected cracks in the image process using proposed Gabor Filter Bank methods. Results: As a result, 94% of detection rate are matched to the actual cracks in same quality and format railway concrete track image. Conclution: The crack detection method using Garbor Filter Bank was confirmed to be effective for crack image including noise in the Korean railway concrete track. This system is expected to become an automated maintenance system in the existing human-centered railway industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.383-388
• /
• 2020

This study aimed to identify the influence of the power components of the ammunition vehicle on the maximum speed. The maximum speeds of the engine and transmission changes were 3% and 1.7%, respectively. In the case of strong tension based on the track tension, the decrease was 4.6%. A 1.5% increase was obtained when the tension was weak. An examination of the maximum speed by dividing the track tension into six sections revealed the maximum speed to be highest when it was maintained below the middle. Experiments were performed by varying the orbital tension on both sides of the equipment. The maximum speed of the machine was affected by a large part of the tension. The maximum speed test was conducted by adjusting the tension at the driving test site. The results showed that when the tension was strong, the speed was 16.7% higher than the standard requirement. The speed was 28.3% at low tension. The influence of the maximum speed on the track tension was confirmed; the effect was greater than replacing the large parts.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.327-337
• /
• 2018

Since the track of the ballastless steel plate girder bridge is connected to a main girder without a deck and a ballast, the impact generated by train passage is transferred directly to bridge main members, and it can cause frequent damage of the bridge as well as higher noise and vibration level. Applying the CWR (Continuously Welded Rail) technology can reduce this structural problems, and, to this end, it is necessary to understand the characteristics of factors influencing vehicle-track or track-bridge interaction. In this paper, experimental study results are presented for examining the longitudinal resistance characteristics of the track, including a rail fastener, a sleeper fastener, and a track skeleton, installed on a ballastless steel plate girder bridge. The experiment is conducted using a disposed bridge from service, which is transported to a laboratory. The experimental results show that the rail fastener satisfies the performance criteria of the longitudinal resistance presented in KRS TR 0014-15, and the longitudinal resistance of old and new type sleeper fasteners is higher than the values provided in the existing research. Also, the unloaded longitudinal resistance of the ballastless track is between the ballast and the concrete tracks.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.433-441
• /
• 2011

It is a fact that the straightening of track alignment is one of the undoubted ways to improve the train speed on conventional lines, while that requires huge investment resources. Therefore, the operation of a tilting train as well as the minimum improvement of track is suggested as an effective and economical alternative way for the speed-up of conventional lines. Since a driving mechanism of tilting train is different from those of existing trains, in order to make sure its operation safety and stability on conventional line, the performance of track and roadbed must be preferentially evaluated on the conventional line. Furthermore, it is necessary to estimate the tilting-train-induced roadbed response in detail since the roadbed settlement can lead to the track deformation and even derailment. In this research, the patterns of wheel load and lateral force were monitored and analyzed through the field tests, and the derailment coefficient and degree of wheel off-loading were calculated in order to evaluate the tilting train running safety depending on the running speeds (120km~180km) on the conventional line. Moreover, roadbed pressure, settlement and acceleration were also observed as tilting-train-induced roadbed responses in order to estimate the roadbed stability depending on the running speeds. Consequently, the measured derailment coefficient and degree of wheel off-loading were satisfied with their own required limits, and all of the roadbed responses were less than those of existing high-speed train (KTX) over an entire running speed range considered in this study. As a result of this study, the tilting train which will be operated in combination with existing trains is expected to give no adverse impact on the conventional line even with its improved running speed.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.46-46
• /
• 2004

한국항공우주산업(주) 우주개발연구센타에서는 고흥의 외나로도 우주센터에서 국내 최초로 발사되는 소형위성 발사체인 KSLV-1(Korea Space Launch Vehicle-1)의 성능검증을 위해 탑재되는 발사체 성능 검증위성(Korea Demonstration Satellite)을 개발하고 있다. 탑재소프트웨어는 검증위성의 임무를 수행하기 위하여 요구되는 데이터를 처리하고, 위성을 제어하는 역할을 수행한다. 이에 따라 검증위성의 탑재소프트웨어의 주요 기능은 발사체 환경 측정 및 비디오 영상 자료의 획득, GPS로부터 위성체 궤도자료의 저장, 밧데리 충방전 제어, 태양 지향 및 지상과의 통신 등을 고려한 자세제어이다. (중략)

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.109-112
• /
• 2006

2002년 발사 된 GRACE (Gravity Recovery and Climate Experiment)는 미국과 독일 합작으로 개발된 지구중력장 측정 전용 위성으로 동일한 궤도를 비행하는 두 개의 위성 사이 거리 변화를 측정하여 지구 중력장을 추정하는 사업이다. GRACE 위성의 핵심 관측기인 위성간 거리측정기의 원리에 대해 소개하고, 운용 현황 및 성능에 대해 소개하였다. 발사 전 성능 분석 단계에서 고려되지 못했던 거리측정기 오차 요인에 대해 분석하고, 향후 연구 방향을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2043-2045
• /
• 2003

본 연구에서는 자기부상 방식의 스테이지 시스템 설계 및 제작을 행하고 시스템의 제어성능평가를 하고자 한다. 본 논문에서는 제어성능의 효율성을 향상시키기 위하여 부상체(Platen)의 기계적인 모델링을 행하고 Platen의 PTP(point to point) 및 궤도추종제어가 가능한 슬라이딩 모드제어기를 제안하였다. 제안한 슬라이딩 모드제어기는 모델링 오차 및 외란에 대해서도 강인한 제어성능을 얻을 수 있으며 수치시뮬레이션을 통하여 그 유용성을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.588-593
• /
• 2011

In this study, the performance analysis method for ramjet engine system with atmospheric air disturbance was proposed. Flight path was determined to satisfy dynamic pressure constant at each flight altitude. The atmospheric air disturbance incoming into a engine intake was simulated by the model Tank proposed. The performance parameters was investigated at each flight condition with air disturbance. Engine operation stability was evaluated as analysis of the normal shock position.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.17-29
• /
• 1999

Inter-Satellite Links(ISL) technique in the Polar Orbit Satellite plays the key role in the communication methods in IRIDIUM system, where the ISL is commonly established between neighbor satellites. The system has major drawbacks in maintaining the multi-hopping link connectivities while the satellite nodes are communicating each other. The proposed system is newly designed to allow diagonal link connections between the satellites and shows how it does improve the performance. The optimized number of satellites in the terms of their altitudes and visible distance are calculated. The traffic parameters and the probability of blocking are analyzed to compare the visible satellite link method with the neighbor link method mathermatically.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.104-110
• /
• 2007

Analyzed is the spectral response profile specification used for the infrared (IR) channels of the meteorological imagers of GOES series geostationary satellites. The variation characteristics of effective wavelength and effective input radiance due to the change of the spectral response function profile within the imager performance specification are analyzed in order to propose how to understand the spectral response specification. As an analysis approach, at first a center symmetrical spectral response function and 4 worst case spectral response functions are selected within the spectral response specification, and then effective wavelength and effective input radiance are calculated for each spectral response function. As a result, the maximum allowable ranges of effective wavelength and effective input radiance are provided per the spectral response specification.