• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.352-362
• /
• 2016

In this paper, a disposal maneuver which complies the space debris mitigation guideline was analysed for KOMPSAT-2 as an example of LEO satellite. Definition of disposal altitude which comply the '25 year rule', re-entry survivability analysis of KOMPSAT-2 parts inside and casualty area analysis were performed using STK and ESA's DRAMA. Finally, assuming that there were several survival objects during uncontrolled re-entry stage, the re-entry initial orbit elements which show the low casualty probability were found even if there were various uncertainties about the initial orbit. As a result, KOMPSAT-2 should be descended its altitude at least 43km or up to 105km to comply '25 year rule' and there were heavy or heat resistant survival objects which generated $4.3141m^2$ casualty area. And if RAAN of re-entry initial orbit was 129 degree, total casualty probability was lower than standard value of space debris mitigation guideline even if there were uncertainties about the initial orbit.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.177-182
• /
• 2016

In order that the track vehicle utilized on the purpose of heavy industry and military affair may endure the vehicle body with heavy weight, the link surrounding the mobile wheel is affected with the great force by the load transferred at the vehicle body. This happened force gives rise to a decline in the durability throughout the track. In this paper, the models with the shapes of track pads in common use are designed and the model at which the wear of track pad and the damage of link can be decreased effectively is contrived. Also, by applying this study result to the design of track vehicle, it can contribute to the safe design for damage prevention and durability improvement. It is possible to be grafted onto the convergence technique at the designed factor of pad shape and show the esthetic sense.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1033-1041
• /
• 2011

In this paper, a collision avoidance maneuver frequency for the KOMPSAT-2 and the KOMPSAT-5 is analyzed. For the statistical prediction of the avoidance maneuver frequency, mission orbits, responsive time, accepted collision probabilities, and positional uncertainties of primary and secondary objects are considered. In addition, the collision avoidance maneuver frequency of the KOMPSAT-2 is compared to the case that NORAD catalog during one year is used to calculate that of the KOMPSAT-2. As a result, the collision avoidance maneuver frequency is one per year on average and effective factors on the statistical prediction of the avoidance maneuver frequency are investigated. Efforts to improve its prediction accuracy are also discussed.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.499-505
• /
• 2007

The major effective of this study is to investigate the fatigue effects of rail pad on High Speed Railway with concrete slab track system. It analyzed the mechanical behaviors of HSR concrete slab track with applying rail pad stiffness based on fatigue effect (hardening and increasing stiffness) on the 3-dimensional FE analysis and laboratory test for static & dynamic characteristics. As a result, the hardening of rail pad due to fatigue loading condition are negative effect for the static & dynamic response of concrete stab track which is before act on fatigue effect. The analytical and experimental study are carried out to investigate rail pad on fatigue effected increase vertical acceleration and stress and decrease suitable deflection on slab track. And rail pad based on fatigue effect induced dynamic maximum stresses, the increase of damage of slab track is predicted by adopting fatigue effected rail pad. after due consideration. The servicing HSR concrete slab track with resilient track system has need of the reasonable determination after due consideration fatigue effect of rail pad stiffness which could be reducing the effect of static and dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.27-41
• /
• 2012

In this paper, there is analyzed the disturbances to impact on COMS attitude and the attitude error using the received telemetries in KARI ground station during normal mode of COMS. COMS was launched successfully at Kourou, French Guiana on the 26th of June, 2010. Up to now after IOT(in-orbit test), COMS is performing well the main mission to measure meteorology and ocean during about half and one year. The disturbances to impact on COMS attitude are mostly by the Sun, by the motion of payload mirror and by the spike happened during operation of earth sensor mirror and wheel. The analysis result on the other cases happened rarely during the nominal operation, is summarized.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.29.1-29.1
• /
• 2009

이 연구는 별 관측을 통해 점 퍼짐 함수(PSF)를 측정하고 나이퀴스트 주파수에서 변조 전달 함수(MTF)을 계산하여 주파수 영역에서 저궤도 광학 위성의 영상품질 평가방법을 도출하였다. 가상 별 영상을 생성하고 IRAF로 2차원의 점 퍼짐 함수를 얻었고 MATLAB으로 점 퍼짐 함수를 2차원 푸리에 변환하여 변조 전달함수를 계산하였다. 공간 영역에서는 점 퍼짐 함수의 모양을 통해서도 영상품질을 검증할 수 있다. Along/Across-Track의 모양이 일치하고 중심에서 좌우대칭이며 델타함수에 가까울수록 좋은 품질의 영상을 의미한다. Along/Across-Track의 점 퍼짐 함수 모양차이는 Line Rate나 Time Delay and Integration(TDI)의 오차에서 기인한다. 별을 점광원으로 본다면 점 퍼짐 함수를 정의하기 쉽고 Along/Across 방향을 동시에 측정 가능하다는 장점이 있다. 궤도상에서 별을 관측하는 것은 지상을 관측하는 것보다 대기 환경의 효과가 크지 않기 때문에 영상 품질 평가에 유리하다. Yaw Steering이나 Nadir Pointing과 같은 자세제어의 효과를 배제할 수 있으므로 자세제어의 효과가 상당 부분 제거된 영상품질을 분석할 수 있다. 지상관측시간이나 배터리 충전시간이 아닌 지구 본영에서 별을 관측하므로 임무에 방해받지 않는다. 지상관측과 같은 효과를 내고 TDI를 사용하는 환경을 구현하기위해 Line Rate를 고려한 자세 기동 방법에 대해 연구하였다. 큰 각도의 자세 기동이 예상되어 쿼터니안을 이용하여 Inertial Pointing하도록 자세 제어하였고, 자세 Slew Rate 구속조건 하에서 제어가 필요하다.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.43-49
• /
• 2008

The track of high-speed railway get deteriorated according as using it. In that case, the maintenance jobs are needed for improvement of track quality. A scheduling problem for the track maintenance of high-speed railway is to determine the jobs should be performed daily. In the problem, the set of jobs for maintenance is given. Each job has it's parameters such as due date, emergency level, and processing time. In addition, jobs can be worked during a certain fixed time when the train doesn't move. In this study, we developed a mathematical model of the scheduling problem for the maintenance of high-speed railway and solved the problem using the ILOG CPLEX library.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.177.1-177.1
• /
• 2012

국내기술로 개발된 고기동 위성이 해상도 70cm급 광학카메라를 탑재하고 태양동기궤도를 따라 지구 주위를 하루에 14바퀴이상 돌면서 임무를 수행한다. 높은 해상도의 영상을 얻기 위해 자세제어계에서는 고성능 별추적기와 자이로를 사용하는 정밀자세결정 로직과 반작용 휠을 사용하는 자세제어 로직을 운용한다. 자세제어계에서는, 발사환경 및 우주환경의 영향으로 인한 자이로의 오정렬, SF오차, 별추적기 상호간 오정렬에 대한 상대보정과 탑재컴퓨터에서 결정한 궤도 및 자세정보와 영상 기준점 정보를 이용하여 절대보정을 수행한다. 한편, 탑재 알고리즘에서는 강건한 자세결정로직을 운용하고 있고, 별추적기의 측정지연 보상, 처리 주기내의 평균 각속도 사용 등 실시간 운용으로 인한 제한으로 성능상의 제약이 있다. 따라서 정밀자세결정 지상 후처리 작업이 필요하며 이를 위해서 기 개발된 지상처리용 정밀자세결정 소프트웨어를 새로운 접속요구규격에 맞춰 업그레이드하였다. 지상처리 정밀자세결정을 위해서 탑재컴퓨터는 영상촬영 전후 일정기간 동안 별추적기 데이터, 자이로 데이터, 탑재컴퓨터에서 결정한 자세정보 등을 매 탑재컴퓨터 처리 주기로 저장하여 지상으로 전송한다. 전송된 자료를 이용하여 지상처리용 정밀자세결정 소프트웨어는 정밀궤도 정보와 결합하여 정밀자세결정을 수행한다. 고기동 위성의 경우 기동 후 정밀자세결정 수렴 속도 향상이 필요하며, 소프트웨어의 필터 파라미터를 조율하여 성능을 향상하였다.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.283-289
• /
• 2004

According to continuos welded rails on a bridge, temperature changes bring about the expansion of the bridge deck adding axil forces on the track. Moreover, the ballast on the bridge deck expansion joint is moved due to the bridge deck. If bridge decks are longer, the influence is greater, loosening ballast, causing track irregularities, and deteriorating passengers' comfort. Considering structure of bridge itself and tolerance of track irregularities caused by the loosened ballast on bridges, the maximum length of a deck should be less than 80m, which is the same as the standard of the French railway. In this study, an interaction between the expansion related to the bridge length and irregularity in longitudinal level referring to measurements and maintenance works performed in the high-speed railways was analyzed. This research shows that installation of sliding plate or vertical ballast stopper is not a good option since it is difficult to install. On the other hand, installation of movable fastener or gluing is easy but its influence is insignificant. To conclude, switch tie tamping or manual tamping is more effective than others.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2400-2404
• /
• 2011

Power spectral density (PSD) model of irregularities for the maglev test track is presented. Track irregularities (gauge, cant, twist and vertical) were calculated from the survey data of sleepers on the test track. PSD model was constructed from the estimated PSDs of each track irregularities. Versine (gauge, cant, twist, vertical and lateral) of the track is obtained and their PSDs were estimated, too. Presented PSD model can be used for the analysis of levitation stability and ride quality of the maglev system.