• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.71-75
• /
• 1992

기구나 구조물의 피로수명은 노치에서의 피로균열 방생수명에 의하여 지배되기때문에 노치로 인한 피로강도감소계수 $K_f$는 피로설계상 대단히 중요한 인자이다. 노치 선단(Notch root)에서의 피로균열발생명수 N$_c$를 기준으로하면 탄성응력집중계수 $K_t$가 10 정도까지 $K_f$와 $K_t$간에는 거의 직선적인 관계가 있음이 이다- 고에 의하여 명석해졌으나 이는 인장,압축의 축력이 작용하였을 때이며 따라서 기구나 구조부재는 축력외에도 굽힘 피로 하중이 작용하였을때도 많으므로 본 연구에서는 굽힘 피로 하중을 받았을때도 있다. -고의 결론이 적용되는지는 검시코져 본 연구를 실시하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.93-102
• /
• 1992

In this paper presented is the reliability analysis of a double skinned hull structure against the ultimate bending moment and fatigue strength under longitudinal bending. The ultimate bending strength is obtained through the beam-column approach in which the load-end shortening curves(stress-strain curves) of stiffened plates under mini-axial compression are derived using the concept of plastic hinge collapse. The fatigue damage only is considered as fatigue failure for which the Miner's damage rule is employed. Assessed are fatigue reliability for the possible joint types found at deck structure. Also included is the reliability analysis of a series system of which elements are ultimate and fatigue failure.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.142.2-142.2
• /
• 2005

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.63-68
• /
• 2003

Shot peening process is most often used to improve the fatigue properties of metal parts, In order to achieve an optimum, repeatable, and reliable fatigue enhancement from the shot peening process, the important shot peening parameters must be optimized, In this paper, the optimum peening intensity(Almen intensity) condition is investigated by experiment. Rotary bending fatigue test has been adopted to investigate the effects of optimum peening on the fatigue characteristics, Experimental results show that the fatigue strength and fatigue life has been tremendously increased by optimum-peening treatment. However, the fatigue strength and fatigue life has been decreased by under or over peening.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.2
• /
• pp.36-49
• /
• 1983

최근 높은 경제성과 용접성의 우수성에 의한 마찰 용접의 응용에 있어서 내열.내식 재료가 개스터어빈, 기관, 핵 발전기등의 기계 부품 생산 공업에 널리 이용되고 있다. 따라서 이종내열 합금강의 마찰 용접된 부품을 이용함에 있어서 내식.내마모 및 용접성 뿐만 아니라 고온 피로 강도와 크리이프 강도 등의 복합 특성에 관한 연구가 요구되고 있다. 본 연구에서는 마르텐사이트계 실크롬 내열강과 오오스테나이트계 닉켈크롬 스테인레스강의 이종 내식.내열 합금강의 최적 용접조건하에서 마찰 용접된 후의 시효 열처리가 용접재의 700 .deg.C 고온 회전 굽힘 피로강도 특성에 미치는 영향에 관하여 실험과 강도해석에 의해 조사되었고 용접후의 용체화 처리와 시효 열처리법에 의한 내열강 마찰 용접강도 개선법을 개발코저한 것이다.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.11-17
• /
• 1990

자동차용 변속기의 설계에 있어서 적용 Engine의 출력 및 차량 성능에 부합하는 동력전달 요소의 전달 용량 및 내구 수명을 고려해야 한다. 특히 자동차가 고속 경량화됨에 따라 변속기의 설계에 있어서도 동력전달 요소들의 소형 고용량화가 요구되며 이를 위해서는 설계시 동력전달 요소들의 정확한 강도 및 피로수명 예측이 필수적이다. 본 보고서에서는 Gear의 굽힘응력 계산식에 대한 고찰 및 Gear의 피로시험을 통하여 Helical 치차의 Bending stress에 대한 피로수명 곡선의 시험식을 도출하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.337-343
• /
• 2002

This study deals with evaluation of bending fatigue strength in shaving gears. The saying gears were manufactured by processes that are currently used in most gears manufacturing companies. The test gears are bobbed, then the tooth surface are treated by a combination of shaving, carburizing and shot peening. The constant stress amplitude fatigue test is performed by using an electro-hydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. In this study, the effect of shaving process and shot peening was investigated and evaluated quantitatively on the fatigue strength. The enhancement of fatigue strength due to shaving process and shot peening is clarified.

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.42-45
• /
• 1998

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.118-126
• /
• 2000

TMCP steel has been widely used to construct ships and offshore structures. When it comes to ship and offshore structures, corrosion fatigue damages caused by sea water and fatigue occurred by wave-induced forces usually go on occurring simultaneously. So the fatigue life in corrosion environment is decreased markedly in comparison with that in air. The fatigue crack in corrosion easily initiates on welded joints of structure like as the fatigue crack in air. Therefore it is very important to study the fatigue properties of those of their welded joints as well as steel plates. In this study, rotary bending fatigue tests have been performed to investigate fatigue crack initiation and behavior of fatigue crack growth on CO2 gas weld HAZ of TMCP steel. The fatigue test used the specimens with various stress concentration factors in air and 3% NaCl solution

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.93-99
• /
• 2000

This study deals with the evaluation of bending fatigue strength in shaving gears, We manufactured gears using manufacture processes that are currently used in most gears manufacturing companies. The test gears are hobbed then the tooth surface are treated by a combination of shaving carbonizing and shot peening. The constant stress amplitude fatigue test is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. In this study we investigated the effect of shaving process and shot peening on fatigue strength, The effect of shaving process ad shot peening on the fatigue strength is evaluated quantitatively,. The enhancement of fatigue strength due to shaving process and shot peening is clarified