Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

A Study on the Evaluation of Bending Fatigue Strength in Shaving Gears

세이빙기어의 굽힘피로강도 평가에 관한 연구

  • 류성기 (경상대학교 수송기계공학부 , 항공기부품기술연구센터)
  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study deals with evaluation of bending fatigue strength in shaving gears. The saying gears were manufactured by processes that are currently used in most gears manufacturing companies. The test gears are bobbed, then the tooth surface are treated by a combination of shaving, carburizing and shot peening. The constant stress amplitude fatigue test is performed by using an electro-hydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. In this study, the effect of shaving process and shot peening was investigated and evaluated quantitatively on the fatigue strength. The enhancement of fatigue strength due to shaving process and shot peening is clarified.

Keywords

References

  1. JSME v.60 no.C Estimation of Residual Stress Due to Shot Peening in Carburized Gears and Its Effect on the Stress Intensity Fator Lyu S.;Inoue K.;Kato M.;Deng G
  2. JSME International Journal Series C v.39 no.1 Effects of Surface Treatment on the Bending Fatique Strength of Carburized Spur Gears Sung-ki Lyu (etc)
  3. Practice for carburized v.246 no.0A AGMA Standard
  4. JSME v.26 no.33 Fatigue Strength of Gears, Trans. Aida T.;Oda S.;Kusano K.;Ito Y.;Bender
  5. VDI-Z v.111 Einsatzgehartete Zahnrader Retting H.
  6. Report of Sumitomo Metals Industry Ltd v.26 Effect of Residual Stress on Bending Fatigue Strength of Case Hardened Gears Nishioka K.;Nishino A.;Hirakawa K.;Komatsu H.
  7. ASME v.2 True Stress and Stiffness of Spur Gear Tooth Tobe T.;Kato M.;Inoue K.
  8. Calculation of Load Capacity of Spur and Helical Gears ISO/DP 6335/111
  9. ASME Spec. Tech. Pull v.5 no.11 Probabilistic Aspects of Fatigue Little R.E.
  10. Journal of Propulsion and Power v.10 no.3 Estimation of Fatigue Strength Enhancement for Carburized and Shot-Peened Gears K. Inoue;M. Kato https://doi.org/10.2514/3.23765