• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.310-315
• /
• 2021

In the case of weapon systems used by the military, defense standards are applied for economical and efficient procurement, management, and maintenance. Defense specifications are documents describing procedures and methods for determining whether technical requirements for products and services are consistent and apply to the production of weapon systems, quality assurance, and configuration management. Software is also subject to defense specifications, and is documented and managed in the same way as other defense specifications. Sometimes it happened to be standardized without some(or all) software. In this case, a competitive contract is impossible and it may affect the quality of weapon systems because the manufacturer arbitrarily changes the software without prior approval. So, software standardization is required, but it is very difficult to verify for firmware installed in hardware. This paper proposed a verification method for g software standardization, and we expect it will contribute to the efficient production and quality assurance of weapon systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.257-265
• /
• 2020

Parts obsolescence is a component type, in which raw materials or parts that make up a weapons system, are developed and produced according to demand, but they age due to changes in technology or market conditions. The weapon system equipment currently being used by the military is having difficulty in procurement, maintenance, and operation because of the obsolescence of parts. Parts obsolescence during the life cycle of a weapons system affects not only the combat readiness of the military but also the economic loss of material, parts, and equipment manufacturers and suppliers. On the other hand, advanced technology has reduced the life span of electronic components that make up the weapons system. In addition, because of the nature of the weapons system, the obsolescence of components takes decades from development to disposal, which has a serious adverse effect on equipment readiness and life cycle costs. Therefore, it is necessary to manage systematically the parts obsolescence from development until the disposal of the weapons system equipment. This study examined the system of component control in developed countries to present a proper management plan for local situations and propose development plans for the early settlement of component control.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.465-472
• /
• 2012

We examined plants that were used as temple food in Jeju from May 2011 to January 2012. Thirty-six temples participated in the study, and there were 58 questionnaire respondents. Fifty-seven taxa were used as temple food, which belonged to 27 families, 51 genera, 55 species, and two varieties. The most commonly used family-based taxa were eight species of Compositae, six species of Cruciferae, and four species of Umbelliferae. Ten species of woody plants and 25 species of Jeju native plants were also used as temple food. The most useful part was the leaf, followed by the root, leaflet, and fruit. A patent search showed that most of the surveyed plants were covered by intellectual property rights. Forty-eight species had food-related patents, 34 species had cosmetics-related patents, and 38 species had medicine-related patents. The purchase and procurement of Jeju temple food plants usually depended on the market or plant cultivation rather than the use of the plants. Gathering of wild herbs for temple food has been performed on a limited basis. Therefore, collecting traditional knowledge for the use of Jeju plant resources should be conducted under different conditions rather than through a temple-related study.

• Journal of Ginseng Culture
• /
• v.5
• /
• pp.52-76
• /
• 2023

This article focuses on changes in the ginseng industry in the 1930s in areas other than the Government Contract Cultivation (GCC) zones. A major characteristic of the ginseng industry in the 1930s was the rapid increase in the area covered by ginseng gardens: the area was about 212 ha in 1929 and 252 ha in 1930 and 1931 but soared to around 441 ha in 1938. This occurred because the non-GCC areas increased significantly during this period. Until the early 1930s, the ratio of GCC to non-GCC areas was 70:30. By the late 1930s, however, the ratio had changed to 53:47. The reason for this change was that the area of the newly established ginseng gardens in the GCC zones had decreased, while that of the non-GCC ginseng gardens had steadily increased. Due to the Japanese invasion of China, China boycotted red ginseng, and exports were sluggish, so the GCC areas were reduced. On the other hand, the non-GCC ginseng gardens were not affected, and the area they covered steadily increased. As a result, in the 1930s, the ginseng industry outside of the GCC areas grew rapidly. The region that led the growth of the ginseng industry outside of the GCC zone was Jeonbuk. By the late 1930s, Jeonbuk dominated the other provinces and accounted for more than 50% of the non-GCC farming zone. Gyeongbuk and Gangwon-do followed Jeonbuk in terms of ginseng cultivation areas. While Gyeonggi-do, Gyeongnam, and Chungbuk were also active in ginseng cultivation, Jeonnam and Chungnam were not active. In the 1930s, the growth of the ginseng industry outside of the GCC zones was driven by the efforts of ginseng farmers and the support of local governments. An examination of Yecheon-gun in Gyeongbuk, Ganghwa-gun in Gyeonggi, and Jecheon-gun in Chungcheongbuk-do showed that ginseng farmers organized cooperatives as the ginseng industry steadily developed in these regions, and these cooperatives worked systematically to cultivate and sell ginseng. In the case of Ganghwa-gun, activities were carried out to incorporate the GCC zone. The Deoksan Ginseng Association in Jecheon-gun determined that financing for cultivation was key and requested subsidies from the provincial government. Administrative authorities also supported the activities of the ginseng farmers. The activities of the farmers and the support of the administrative authorities together led to the growth of the ginseng industry during this period.

• Journal of the military operations research society of Korea
• /
• v.36 no.1
• /
• pp.77-90
• /
• 2010

Adapting commercial equipments to military operations may provide the advantage of low cost, reduced acquisition time, and technology advancement. On the other hand, it may also offer the opportunity for a reliability and logistics risk because commercial products, standards, and practices may not meet military requirements. In addition to this, commercial vendors have little experience in providing the technical data required to support military deployment logistics. As more companies are equipped with data aquisition systems for their products, considerable amount of field warranty data has been accumulated. Typically, the field data for a given product comprise with the sales volume and the number of the claims for each period. Three types of product data are considered in this study: military designed equipment operating in a military environment, commercial equipment operating in a military environment, and commercial equipment operating in a commercial environment. We construct a estimation model for each type of data and propose an reliability transform method from a commercial environment to a military environment. Parametric methods for estimating the product reliability are proposed based on maximum likelihood criteria and least square criteria. Then a reliability transform procedure for handling different types of data is proposed in a consistent fashion. A case study is investigated to characterize our model based on a real field warranty data set.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.311-316
• /
• 2020

The main cause of DMSMS is the rapid replacement cycle and short life cycle of parts, according to the development of science, compared to the long life cycle of weapons systems. In particular, the problem of the supply and demand of such parts becomes even more acute during the operation maintenance phase after the mass production and power generation stage. To eliminate DMSMS problems that arise continuously from development to the operation of weapon systems and select the most cost-effective countermeasures to obsolescence, this paper suggests a standard to determine the appropriate time for quantitative performance improvement by conducting total life cycle cost analysis. For such purpose, this study examined the domestic and overseas cost analysis methods and applied it to single domestic weapon system to verify the research. This study responds to the issue of discontinuing components and helps reduce the total life cycle cost of military products.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.163-173
• /
• 2010

A significant number of projects have been managed by US Army Corps of Engineers FED. Today, more information must be provided to the parties involved in the projects by phase than ever before. Specifically, USFK`s construction projects have been managed by FED(Far East District). Recently, however, large US private construction companies have been filling the role previously taken by FED. However, there is few construction managers to implement FED project in Korea. Accordingly, this study analyzes FED projects practices with focus on the construction management actors in order to suggest guideline. This study suggests a model FED construction process(Bid, Contract, Construction, As-Built Phase) by analyzing the existing FED project process using a IDEF0 methodology.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.50-56
• /
• 2002

최근 3-4년간 MR의 hardware와 software의 급격한 발전으로 마침내 작년 말에 3.0 Tesla whole body MR 장비가 미국 FDA의 공인을 받았다. 한국에서도 일찍부터 3T MR장비의 개발이 이루어 졌고 이미 설치되어 연구와 임상이 이용되고 있다. 여러 회사에서 개발 및 연구된 전신 3.0T MR 장비가 여러가지 가능성을 보이고 임상 도입 단계에 있지만 아직까지 실지 임상에서는 뇌신경계 분야가 주류를 이루고 있다. 지금 뇌신경계 분야에서 보편적으로 늘리 사용되고 있는 1.5T MR 장비는 모든 면에서 상당히 안정적으로 임상 및 연구에 이용되고 있다. 1-2년 전만 해도 3.0 T MR기기는 뇌신경계 영역에서도 임상적으로 늘리 사용되기에는 안정적인 면에서는 1.5T 기기에 비해서 떨어지는 것이 사실이었다. 그래서 주로 연구실 영역에서 많이 이용되고 있었다. 그러나 지금 본원에 설치 완료되어 임상에 적용한지 6개월 정도 이용한 예에서 보면 (about 2300 cases/6months) hardware, software적인 면에서 아직 조금의 불편함이 있지만 많은 부분이 충분히 인지되고 개선이 가능한 부분으로 거의 불편함이 사라질 것으로 기대되고 있고, 불편함을 넘을 수 있는 여러 가지 장점이 있다고 본다. 고자장 (>3.0 T) MRI의 매력은 자장에 비례적으로 SNR, spectral resolution이 높아지고, T1, BOLD등에 의한 대조도가 향상한다는 것이다. SNR의 증가는 temporal, spatial 분해능을 증가시키고, spectral resolution이 높아짐에 따라 MR spectroscopy상에서 주요 대사물질 이외 작은 대사물질에 관한 스펙트럼의 분석을 향상시킨다. 이처럼 고자장 MR은 근본적인 장점을 가지고 있고 이러한 장점이 고자장 MR 시대로 가야 할 이유을 모두 설명하고 있다고 생각된다.세포질등이 있으며, 이들중에서 lysosomes, peroxisomes, 그리고 미토콘드리아가 특정한 유전성 백질질환에 중요한 역할을 하는 것이 밝혀졌다. 이러한 질환들은 최소한 각 소기관에 의한 질환군으로 분류될 수 있다.SXR이 ER의 transactivation 효과를 약간 촉진한 반면 MDA-MB-231세포는 SXR을 제외한 CAR와 PPAR${\gamma}$에 의해 ER의 transactivation 효과가 약간 증가되는 경향을 보였다. 이러한 결과는 유방암세포에서는 CAR, SXR, PPAR${\gamma}$과 같은 xenobiotic nuclear receptor에 의한 ER transactivation 효과가 간암세포와는 다르게 나타나며, 유방암의 종류에 따라서 endogenous CAR, SXR, PPAR${\gamma}$수용체가 다르게 발현됨으로써 이들에 대한 반응이 서로 상이한 특징을 나타낼 수 있을 것으로 사료된다. 따라서 estrogen receptor에 의해 매개되는 estrogn의 전사활성조절기전이 표적세포에 따라 다른 경로를 포함 할 수 있음을 시사한다.서 흡착 능력이 우수하게 나타났으며, 황화수소는 펄라이트, 왕겨, 소나무수피에서 상대적으로 우수한 것으로 나타났으며, 혼합충전재는 암모니아의 경우 코코넛과 펄라이트의 비율이 7：3인 혼합 재료 3번과 소나무수피와 펄라이트의 비율이 7：3인 혼합 재료 6번에서 다른 혼합 재료에 비하여 우수한 것으로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며, 코코넛의 경우 전량을 수입에 의존하고 있다는 점에서 국내 조달이 용이하며, 구입 비용도 적게 소요되는 소나무수피를 사용하는 것이 경제적이라고 사료된다. 5. 마지막으로 악취제거 미생물균주를 접종한 소나무수피 50%와 펄라이트

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.3
• /
• pp.53-68
• /
• 2024

Generative AI is receiving a lot of attention around the world, and ways to effectively utilize it in the business environment are being explored. In particular, since the public release of the ChatGPT service, which applies the GPT-3.5 model, a large language model developed by OpenAI, it has attracted more attention and has had a significant impact on the entire industry. This study focuses on the emergence of Generative AI, especially ChatGPT, which applies OpenAI's GPT-3.5 model, to investigate its impact on the startup industry and compare the changes that occurred before and after its emergence. This study aims to shed light on the actual application and impact of generative AI in the business environment by examining in detail how generative AI is being used in the startup industry and analyzing the impact of ChatGPT's emergence on the industry. To this end, we collected company information of generative AI-related startups that appeared before and after the ChatGPT announcement and analyzed changes in industry, business content, and investment information. Through keyword analysis, topic modeling, and network analysis, we identified trends in the startup industry and how the introduction of generative AI has revolutionized the startup industry. As a result of the study, we found that the number of startups related to Generative AI has increased since the emergence of ChatGPT, and in particular, the total and average amount of funding for Generative AI-related startups has increased significantly. We also found that various industries are attempting to apply Generative AI technology, and the development of services and products such as enterprise applications and SaaS using Generative AI has been actively promoted, influencing the emergence of new business models. The findings of this study confirm the impact of Generative AI on the startup industry and contribute to our understanding of how the emergence of this innovative new technology can change the business ecosystem.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1399-1408
• /
• 2007

This study was conducted to compare health and nutritional status of 45 home-living elderly people receiving free Meals on Wheels (MOW) (13 men, 32 women) and 81 low income class elderly people receiving free congregate meals (CM) (10 men, 71 women) served in Seoul. Data were obtained from questionnaires, anthropometry and interviews for the 24-hour dietary recall methods. There were no significant differences between the two groups in age and body mass index. Education level, type of housing, family type and income of the two groups also were not significantly different. In MOW, frequencies of exercise were lower while the prevalence of stroke, respiratory disease and loneliness were higher, compared with the CM. The scores of ADL, IADL and food habit of MOW were lower than those of CM. The average daily nutritional intake of both MOW and CM were as a whole under the DRI for Koreans. Energy and macro-nutrient intakes of MOW were tended to be lower than CM (except protein intakes for female). Ca, K, vitamin A, vitamin $B_1$, vitamin $B_2$, vitamin C and folate intakes of MOW were less than 50% of DRI. Percentages of subjects consuming energy less than 75% of EER and 4 nutrients intakes less than EAR were higher in MOW (42.2%) than in CM (1.2%). Our results indicated that dietary nutritional status of MOW was very poor, especially in the case of female elderly groups. For the welfare of the home-living elderly people receiving free MOW, meal service programs should be improved in quality of diet by national supports.