• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.13-24
• /
• 1996

The following results were obtained by analyzing the displacement, strain and stability of ground at the soft ground excavation using sheet pile. 1. Before setting the strut, the horizontal displacement was large on the upper part of excavated side, but after setting the strut, it showed concentrated phenomenon while being moved to go down to the excavated side. 2. After setting the strut, the displacement of sheet pile was rapidly decreased about a half compared with before setting the strut. The limitation of excavation depth was shown approximately GL-8m after setting double stair strut. 3. Maximum shear strain was gradually increased with depth of excavation, and local failure possibility due to shear deformation at the bottom of excavation was decreased by reinforcement of strut. 4. Maximum horizontal displacement of sheet pile at GL-7.5m was shown 0.2% of excavation depth in elasto-plastic method, and 0.6% in finite-element methods, and the maximum displacement was occurred around the bottom of excavation. 5. To secure the safety factor about penetration depth in the ground of modeling, D/H should be more than 0.89 in the case of one stair strut, and more than 0.77 in the case of double stair strut. 6. The relation of safety factor and D/H about the penetration depth was appeared, Fs=0.736(D/H) + 0.54 in the case of one stair strut, and Fs=0.750(D/H) + 0.62 in the case of double stair strut.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2016

Concrete filled steel tube system has two major advantages. First, the confinement effect of steel tube improves the compressive strength of concrete. Second, the load capacity and deformation capacity of members are improved because concrete restrains local buckling of steel tube. It does, however, involve workability problem of using stud bolts or anchor bolts to provide composite effect for larger cross-sections. While the ribs inside the columns are desirable in terms of compressive behavior, they cause the deterioration in load capacity upon in-plane deformation resulting from thermal deformation. Since the ribs are directly connected with the concrete, the deformation of the ribs accelerates concrete cracking. Thus, it is required to improve the toughness of the concrete to resist the deformation of the ribs. Welding built-up tubular square columns can secure safety in terms of fire resistance if the problem are solved. This study focuses on mixing steel fiber in the concrete to improve the ductility and toughness of the columns. In order to evaluate fire resistance performance, loaded heating test was conducted with 8 specimens. The behavior and thermal deformation capacity of the specimens were analyzed for major variables including load ratio. The reliability of heat transfer and thermal stress analysis model was verified through the comparison of the results between the test and previous study.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.1-18
• /
• 2009

A series of three-dimensional numerical simulations using a generalized multidimensional hydrodynamic dispersion numerical model is performed to simulate effectively and to evaluate quantitatively impacts of urbanization on density-dependent groundwater flow and salt transport in a coastal aquifer system, Suyeong-Gu, Busan, Korea. A series of steady-state numerical simulations of groundwater flow and salt transport before urbanization with material properties of geologic formations, which are established by numerical modeling calibrations considering all the urbanization factors, is performed first without considering all the urbanization factors. A series of transient-state numerical simulations of groundwater flow and salt transport after urbanization is then performed considering the urbanization factors individually and all together. Finally, the results of both numerical simulations are compared with each other and analyzed. The results of the numerical simulations show that density-dependent groundwater flow, salt transport, and seawater intrusion in the coastal aquifer system are intensively and extensively impacted by the urbanization factors. Especially, these urbanization factors result in the changes of the total groundwater volume and salt mass in the coastal aquifer system. However, such impacts of each urbanization factor are not spatially uniform but locally different.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.238-245
• /
• 2010

Progressive collapse is defined as a collapse caused by sectional destruction of a structural member which links to other surrounding structures. Currently the design guidelines for the prevention of progressive collapse is not available in Korea. So, structural engineers have a difficulty in evaluating progressive collapse. In this study, the static and dynamic analysis to evaluate the methods and procedures are conducted using commercial analysis program for RC moment resisting frames. According to the study, DCR value of RC moment resisting frame system based on code in Korea is over 2 and it shows that it can't provide alternate load paths due to the progressive collapse. And additional reinforcement should be considered for the progressive collapse resistance. As a result of vertical deflection and DCR value of linear static analysis and linear dynamic analysis, the results of dynamic analysis were underestimated more than the result of static analysis. Thus, the dynamic coefficient value of 2 provides conservative estimation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.11-18
• /
• 2005

To detect vehicles in image, first the image is transformed with the steerable pyramid which has independent directions and levels. Feature vectors are the collection of filter responses at different scales of a steerable image pyramid. For the detection of vehicles in image, feature vectors in feature points of the vehicle image is used. First the feature points are selected with the grid points in vehicle image that are evenly spaced, and second, the feature points are comer points which m selected by human, and last the feature points are corner Points which are selected in grid points. Next the feature vectors of the model vehicle image we compared the patch of the test images, and if the distance of the model and the patch of the test images is lower than the predefined threshold, the input patch is decided to a vehicle. In experiment, the total 11,191 vehicle images are captured at day(10,576) and night(624) in the two local roads. And the $92.0\%$ at day and $87.3\%$ at night detection rate is achieved.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.58-66
• /
• 1990

A series of test was performed measuring the failure strength and failure mode of Gr/Pi, $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate containing a single pin loaded hole. The finite element method is applied to calculate the stress distribution in the laminates, then the failure load and the failure mode were predicted by means of the characteristic length. 12 different geometric variations were developed to analyze the effects of the ratio of specimen width to hole diameter (W/d) and ratio of edge distance to hole diameter (L/d). X-Ray of NDE methods were utilized in finding out the initial defects, damage and the fracture mechanism, and SEM(Scanning Electron Microscopes) was used the evaluation of the fracture mechanism and crack propagation around hole under tension pin loading. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate are found to be most sensitive to W/d but not so influenced by L/d. The failure mode and tensile strength predicted by the model show agreement with experiment data for pin loading bolted jointed test except range of $L/d{\leqq}3$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6360-6367
• /
• 2015

The location selection of the element that should guarantee easy visual perception, like the landmark, is the a topic that appears much in the design process. Recently, a graph analysis technique using computers has been applied in order to evaluate the visibility of the visual element, but the analytic frame is flat and the setting of the visual pont and the matrix are fixed so there were great limitations in obtaining the results of the practical analysis. Thus, this study presented Nondirectional Multi-Dimensional Calculation (MDVC-N), an analytic methodology available for the analysis of the dynamic visual point in the 3D environment. It thus attempted to establish the analytic application using the 3D computer graphics technology and designed a script structure to set the visual point and the matrix. In addition to that, this study tried to verify the analytic methodology by applying the complex land as an example model, where buildings in various heights of terrains with a high-differences are located, verifying the same analytic methodology. It thus tried to identify the visual characteristics of each alternative location. The following results were gained from the study. 1) The visibility can be measured quantitatively trough the application of the 6-alternatives. 2) Using the 3dimensional graph, intuitive analysis was possible. 3) It attempted to improve the analytic applicability by calculating the results corrected as a variable behavior from the local integration variable of the space syntax.

• Journal of the Korean Society for Railway
• /
• v.17 no.5
• /
• pp.355-364
• /
• 2014

The restrained volume changes of concrete due to variations of temperature and moisture produce transverse cracks in continuously reinforced concrete tracks (CRCTs). Such cracks are known to significantly affect the behaviors and long-term performance of CRCT. To investigate the effects of the transverse cracks on the behavior of CRCT and to develop more reasonable maintenance standards for cracks, in this study, the stress distribution of the track concrete layers (TCL) and the hydraulically stabilized base course (HSB) with transverse cracks were numerically predicted by a three dimensional finite element analysis when CRCT was subjected to train loads. The results indicate that the bending stresses of TCL and vertical stresses at the interfaces between TCL and HSB increased as the cracks were deepened. In addition, vertical stresses were locally concentrated near reinforcing steel in cracks in TCL when full-depth cracks developed, which may lead to punch-outs in CRCTs. Comparably, the effects of crack width and spacing were not as significant as crack depth. This study indicates that ensuring the long-term performance of CRCTs requires adequate maintenance not only for crack width and spacing but also for crack depth. Our results also show that locating HSB joints between sleepers is beneficial to the long-term performance of CRCTs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.248-248
• /
• 2018

새만금 종합개발계획(정부, 2011)에 따른 내부개발의 완료시점은 2030년이며, 방수제 공사와 준설 등과 같이 만경강 및 동진강 유역 내 흐름을 변화시킬 수 있는 공사를 포함하고 있으므로 현재와 2030년의 하천 및 호의 수리특성은 다를 것이라 예상된다. 2030년까지 준설상황 등을 예측하여 반영하는 것은 사실상 불가능하기 때문에 새만금 종합개발계획에서 제시하고 있는 내부개발의 완료시점을 기준으로 홍수사상을 모의하였다. 새만금 호의 물리적인 변화는 수리특성의 변화로 이어질 수 있으며, 이는 상류지역으로 전파가 될 수 있으므로 호내 뿐만 아니라 만경강과 동진강 전역에 대한 홍수시의 수리특성을 검토하였다. 새만금 호와 연결된 만경강과 동진강의 설계홍수량은 대부분의 구간에서 100년 빈도이기 때문에 본 연구에서는 100년 빈도 홍수사상에 대한 분석을 기초로 홍수위 검토를 수행하였고, RCP8.5 시나리오를 적용한 100년 빈도 홍수량과 500년 빈도 홍수량에 대한 추가적인 연구를 수행하였으며, 이 결과를 토대로 취약지구 분석 및 대책 등을 제시하였다. 수치모의는 Delft3D를 이용하였으며, 새만금 유역의 동진강 지구의 실측치와 비교함으로써 모델의 적용성을 검증하였다. 서해안 조위 특성상 새만금 방조제는 조위 영향이 크므로, 이에 본 연구에서는 외조위의 특성을 고려하기 위해 새만금 유역 주변의 12개 조화상수(tidal harmonic constant)를 이용하여 조위에 대한 모의를 별도로 수행하고, 이 결과를 배수갑문의 경계조건으로 이용하였다. 상류 경계조건은 하천기본계획상에 제시된 하천은 이를 이용하였으며, 그 외의 소하천은 유역면적을 이용한 계산법을 사용하여, 선형적 면적 비유량(Specific Discharge, SD) 방법을 적용하여 본류의 유량에 부가하는 방식으로 수행하였다. 수치해석 결과, 준설 구간의 수위는 전반적으로 저하되었으며, 거리에 따른 수면의 경사를 분석한 결과 기존의 하천구역이 준설 등으로 인하여 호수의 특성으로 변화된 것으로 확인하였다. 본 연구에서 취약지구는 홍수위가 제방고의 약 80% 이상 되는 지역으로 결정하였으며, 이를 토대로 취약지구 분석을 수행한 결과 기존 100년 빈도에서 1지점, RCP 8.5 시나리오가 적용된 100년 빈도에서 88지점, 500년 빈도에서 125지점이 잠재적인 치수 위험이 있는 것으로 파악되었다. 기존의 1차원 연구결과와는 차이가 있는 부분은, 다수의 취약지구가 만곡부 또는 합류부 인근에 위치한 것이다. 향후 이러한 상대적인 치수 취약지점에 대해 정밀하고 국부적인 연구를 수행하여 정확한 홍수위 예측을 수행해야 할 것이다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.131-140
• /
• 2009

It has been repeatedly reported that a drainage system of a drained tunnel is deteriorated. And consequently the water pressure on the lining increases with time. However, little research on the watertight tunnel was found in the literatures. According to field measurements, leakage of the undrained tunnel has increased with time, which is completely opposite to the behavior of the drained tunnel. It is evident that the hydraulic deterioration of the tunnel lining changes the water pressure on the lining and the amount of leakage, thus the design coneept in terms of groundwater is not maintained tightly throughout the life time of the tunnel. The Segment lining is generally constructed as watertight. However, it is frequently reported that the leakage in the segment tunnel increases with time. It is also reported that the leakage is generally concentrated at the joints of the segments. In this study structural and hydraulic interaetion of the segment lining due to the hydraulic deterioration of the segments and the joints is investigated using the numerical modeling method. An electric utility tunnel below groundwater table is considered for the analyses. The effects of hydraulic deterioration of the segment lining are identified in terms of ground loading, water pressure and lining behavior. A remedial grouting measure for leakage is also numerically simulated, and its appropriateness is evaluated.