• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.253-258
• /
• 2006

An empirical model of nitrous oxide emission from agricultural soil has been applied. It is based on the relationship between $N_2O$ and three soil parameters, soil mineral N(ammonium plus nitrate) content in the topsoil(0-15cm), soil water-field pore space, and soil temperature, determined in a study on clay loam and sandy loam at the pepper field in 2004. For comparisons between estimated and observed values of $N_2O$ emissions in the pepper field, it was investigated that $N_2O$ amount in the clay loam and sandy loam were overestimated as 12.2% and less estimated as 30%, respectively. However, $N_2O$ emissions were overestimated as 27.1% in the clay loam and 14.7% in the sandy loam from $N_2O$ gas samples collected once a week at the same time analyzing soil parameters. This modelling approach, based as it is well established and widely used soil measurements, has the potential to provide flux estimates from a much wider range of agricultural sites than would be possible by direct measurement of $N_2O$ emissions.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.123-130
• /
• 2014

A simultaneous determination was developed for 9 aminoglycoside antibiotics (amikacin, apramycin, dihydrostreptomycin, gentamicin, hygromycin B, kanamycin, neomycin, spectinomycin, and streptomycin) in meat by liquid chromatography tandem mass spectrometry (LC-MS/MS). Each parameter was established by multiple reaction monitoring in positive ion mode. The developed method was validated for specificity, linearity, accuracy, and precision based on CODEX validation guideline. Linearity was over 0.98 with calibration curves of the mixed standards. Recovery of 9 aminoglycosides ranged on 60.5~114% for beef, 60.1~112% for pork and 63.8~131% for chicken. The limit of detection (LOD) and limit of quantification (LOQ) were 0.001~0.009 mg/kg and 0.006~0.03 mg/kg, respectively in livestock products including beef, pork and chicken. This study also performed survey of residual aminoglycoside antibiotics for 193 samples of beef, pork and chicken collected from 9 cities in Korea. Aminoglycosides were not found in any of the samples.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.97-110
• /
• 2012

This study aimed at considering the original shape of Iljiam Tea Garden at Mt. Daedun. In order to accomplish our goal, we tried to strengthen the authenticity of construction of Iljiam by comparing its space structure depicted in the poetry of Choeui(艸衣) the monk with its current restored state. According to the clues and situation in the poetry along with symbolic words like 'Choeui' and 'Ilji(一枝)', Iljiam seemed to be a tea garden with elegant and celestial beauties, and with a nice view where Choeui the famous monk searched for the highest state of enlightenment by enjoying and living in nature. When we compared the plural aspects of Iljiam like Dacheon(茶泉), Dajo, Mulhwak, Darim(茶林), Chaewon(菜園), and Yeonji(蓮池) with those of Dasan Tea Garden[茶山草堂], we could see that the basic components of tea-culture space of both gardens are the same, showing the organizational principle of the top and bottom area to stress reading and studying. When it is restored, the authenticity of Iljiam should be pursued by linking spatial, historical, and landscaping characteristics as the space of which Choeui the monk carried out Zen meditation and mastered tea. However, the recent grand scale Buddhist business like the expansion of access road and construction of Buddhist sanctuary and Seolimdang became the biggest threat to the authenticity. Especially, it was emphasized many times in various poetry that the view from Iljiam and its surroundings is extraordinary, so it is critical to get rid of obstacles to the view from Iljiam and its surroundings in order to restore Iljiam as its genuine form. The current Iljiam should be re-made because it is like a leaf-roofed garden, not like a hermitage. However, the opinion that Jawoohongryeon-sa(紫芋紅蓮社) is somewhat a Taoistic and Taoist hermit space with a special shape adopted the pattern of building of the Joseon period rather than a Buddhist building can be accepted as long as other convincing historical evidences are found out, considering the ideology of uniting Confucianism and Buddhism and the spirit of Taoist hermit found out from poetry of Choeui and his friends. In conclusion, the restoration of Iljiam in 1979 was carried out to restore the place of Iljiam rather than to restore the originality of Iljiam by combining and referring domestic cases of tea gardens. However, there is not much material for restoration even though the main frame of Iljiam was distorted. Nevertheless, the top and bottom ponds should be constructed as a rectangle shape. In addition, it can be improved much in terms of plants and trees. It is necessary to restore bamboo forest, which was razed in order to make a tea plantation around Seolimdang, to set vines of arbors above the upper limbs, to plant pine trees and willow trees inside of the garden, and to put Dajeolgu under the corner of the eaves. Especially, the bamboo forest emphasized in poetry and took care of by Choeui himself should be restored inside of the garden.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.200-206
• /
• 2019

Korea is introducing new animal welfare rearing standards for swine farmers in order to improve the breeding environment of livestock on Korean farms, Korea is establishing a policy to apply to all new farms in 2019 and to all existing farms in 2025. These guidelines are limiting stall breeding of sows after 4 weeks of pregnancy, the light intensity should be above 40lux, the ammonia level should be below 25ppm and the breeding density area should be increased from $1.4m^2$ to $2.25m^2$. In Europe, where animal welfare has been studied and applied for nearly 100 years, the facility specifications and management manuals are available and provided to farmers to introduce proper animal welfare for pigs and to enhance the convenience and utility of farmers who are converting to raising pigs. The EU has established independent standards for each country, and the EU has set the standards for floor facilities to improve animal welfare on pig farms and as applied by farmers. Yet in Korea, there are no methods and techniques for breeding methods that do not use an ordinary stall, except on a few leading farms. There has been no research on the welfare of sows so that farmer could improve sows' living conditions. Thus, farmers can minimize the difficulty of implementing the changing government policies, and they must develop farm turnover policies and specification management manuals to cope with the introduced regulations on sow group housing. We suggest that conducting research and evaluating the level of sows' welfare are important for farmers.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2012

The Government of South Korea has continued its effort to fixate virtuous circle of economic growth and climate change response to cope with international demands and pressure to commitment for greenhouse gas reduction effectively. Nationally, Korean Government has established "Enforcement of the Framework Act on Low carbon, Green Growth"(2010. 4. 13) to implement national mid-term GHG mitigation goal(30% reduction by 2020 compare to BAU), which established the foundation for phased GHG mitigation by setting up the sectoral and industrial goal, adopting GHG and Energy Target Management System. Also, follow-up measures are taken such as planning and control of mid-term and short-term mitigation target by detailed analysis of potential mitigation of sector and industry, building up the infrastructure for periodic and systematic analysis of target management. Likewise, it is required to establish more accurate, reliable and detailed sectoral GHG inventory for successfully establishment and implement the frame act. In comparison to the $CO_2$ emission, Especially fluorinated greenhouse gases (HFCs, PFCs, $SF_6$) are lacking research to build the greenhouse gas inventories to identify emissions sources and collection of the applicable collection activities data. In this study, with the refrigeration and air conditioning sector being used to fluorine refrigerant(HFCs) as the center, greenhouse gas emission estimation methodology for evaluating the feasibility of using this methodology look over and mobile air conditioning, fixed air conditioning, household refrigeration equipment, commercial refrigeration equipment for the greenhouse gas emissions were calculated. First look at in terms of methodology, refrigeration and air conditioning sector GHG emissions in developing country-specific emission factors and activity data of the industrial sector the construction of the DB is not enough, it's 2006 IPCC Guidelines Tier 2a (emission factor approach) rather than the Tier 2b (mass balance approach) deems appropriate, and each detail by process, sectoral activity data more accurate, if DB is built Tier 2a (emission factor approach) can be applied will also be judged. Refrigeration and air conditioning sector in 2009 due to the use of refrigerant greenhouse gas emissions ($CO_2eq.$) assessment results, portable air conditioner 1,974,646 ton to year, fixed-mount air conditioner 1,011,754 ton to year, household refrigeration unit 4,396 ton to year, commercial refrigeration equipment 1,263 ton to year was estimated to total 2,992,037 tons.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.267-275
• /
• 2018

The purposes of this study were to analyze the mineralogical characteristics of slaked lime used for wall repair of traditional buildings in Bagan, Myanmar and to evaluate the physical properties of lime plaster produced by the same method as Bagan region. In the X-ray diffraction and thermal analysis of the Myanmar slaked lime, portlandite ($Ca(OH)_2$) and brucite ($Mg(OH)_2$) were detected as main constituent minerals, and a carbonate rock mainly composed of dolomite ($CaMg(CO_3)_2$) minerals may be used as a raw material to make slaked lime. The field-emission scanning electron microscope analysis showed that the Myanmar slaked lime was composed of irregularly shaped crystals of $0.5{\mu}m$ or larger and a small amount of $0.1{\mu}m$ of plate - like crystals. The size and uniformity of crystals in Myanmar lime is different from that of Korea slaked lime. This may be attributed to the effect of the mineral composition and the lime hydration method of Myanmar, which produces slurry by immersing the burnt lime in excess water for a long period of time. The compressive strength of the lime plaster in Myanmar resulted in a mean value of $1.13N/mm^2$ for the specimens cured for 28 days. The strength of the specimens with Bale juice was $1.03N/mm^2$, respectively. The lime is an air setting material that exhibits strength through long carbonation process. Therefore, it is necessary to evaluate physical properties according to curing period through long-term curing over 28 days in the future.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.72-87
• /
• 2009

This research is insect diversity analysis on the basis of survey results and bibliographies of Hongdo Island, Mts. Seoraksan, Hallasan, Daeamsan & Daeusan, Hyangnobong peak & Geonbongsan nature reserves and Dokdo Protected Natural Area among 10 designated nature reserves. The Mt. Hallasan nature reserve has 1,867 species in 22 orders and shows the highest species diversity. The species diversities of Mt. Seoraksan, Mt. Hyangnobong peak & Geonbongsan, Hongdo Island, Mt. Daeamsan & Daeusan, and Dokdo Protected Natural Area reveal 1,604 species in 19 orders, 704 species in 18 orders, 474 species in 19 orders, 468 species in 16 orders, and 114 species in 11 orders, respectively, in descending order. The order Lepidoptera shows as dominant taxa in Hongdo, Seoraksan, Hallasan, Hyangnobong peak & Geonbongsan, whereas the order Coleoptera as subdominant taxa in these areas. On the other hand, in Mt. Daeamsan & Daeusan, and Dokdo Protected Natural Area, the order Coleoptera appears as dominant taxa whereas the order Lepidoptera as subdominant taxa. The order Ephemeroptera has been shown the highest species diversity in Seoraksan which is reported to 25 species, Odonata in Hallasan to 28, Dermaptera in Seoraksan to 9, Orthoptera in Hallasan to 51, Hemiptera in Hallasan to 175, Homoptera in Seoraksan to 126, Hymenoptera in Hallasan to 183, and Diptera in Hallasan to 206. The species diversity is generally poor in Daeamsan & Daeusan, Hyangnobong peak & Geonbongsan, and Dokdo Protected Natural Area. Maybe this result is caused by the lack of various academic surveys compared to the other areas. It is needed to study systematic academic investigation on insect in the nature reserve areas in Korea, and to plan appropriate management and conservation on natural environment considering biodiversity of each nature reserve area.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.78-91
• /
• 2018

Sangjogam, located in Goseong, Gyeongsangnam-do, was designated as Natural Monument #411, because of its diverse geological heritage, such as fossils, ripple marks, dykes, and columnar joints. In the area, Byeongpungbawi, with its beautiful columnar joints vertical to the bedding plane of the underlying sedimentary rocks and spectacular coastal view, was named after its overall shape reminiscent of a huge folding screen. The purpose of this study was to investigate the formation process of the columnar joints using the anisotropy of magnetic susceptibility (AMS) method. AMS measurements showed that the k1 and k3 values representative of directions of the long and short axes of a magnetic particle at each point strongly clustered, and the oblate magnetic foliation structure in Byeongpungbawi developed during sill-type intrusion rather than lava flow. In summary, Byeongpungbawi was produced by sill-type intrusion along the bedding plane of the underlying sedimentary layer, and the subsequent formation of columnar joints was accompanied by the cooling and contraction of intruding rhyolite magma. This study potentially provides a basic research tool in understanding the formation mechanism of columnar joints which are widely distributed in southern Korea.

• Conservation Science in Museum
• /
• v.26
• /
• pp.161-182
• /
• 2021

A jungwangu, a type of medium-sized mortar, is a firearm with a barrel and a bowl-shaped projectileloading component. A bigyeokjincheonroe (bombshell) or a danseok (stone ball) could be used as a projectile. According to the Hwaposik eonhae (Korean Translation of the Method of Production and Use of Artillery, 1635) by Yi Seo, mortars were classified into four types according to its size: large, medium, small, or extra-small. A total of three mortars from the Joseon period have survived, including one large mortar (Treasure No. 857) and two medium versions (Treasure Nos. 858 and 859). In this study, the production method for medium mortars was investigated based on scientific analysis of the two extant medium mortars, respectively housed in the Jinju National Museum (Treasure No. 858) and the Korea Naval Academy Museum (Treasure No. 859). Since only two medium mortars remain in Korea, detailed specifications were compared between them based on precise 3D scanning information of the items, and the measurements were compared with the figures in relevant records from the period. According to the investigation, the two mortars showed only a minute difference in overall size but their weight differed by 5,507 grams. In particular, the location of the wick hole and the length of the handle were distinct. The extant medium mortars are highly similar to the specifications listed in the Hwaposik eonhae. The composition of the medium mortars was analyzed and compared with other bronze gunpowder weapons. The surface composition analysis showed that the medium mortars were made of a ternary alloy of Cu-Sn-Pb with average respective proportions of (wt%) 85.24, 10.16, and 2.98. The material composition of the medium mortars was very similar to the average composition of the small gun from the Joseon period analyzed in previous research. It also showed a similarity with that of bronze gun-metal from medieval Europe. The casting technique was investigated based on a casting defect on the surface and the CT image. Judging by the mold line on the side, it appears that they were made in a piece-mold wherein the mold was halved and using a vertical design with molten metal poured through the end of the chamber and the muzzle was at the bottom. Chaplets, an auxiliary device that fixed the mold and the core to the barrel wall, were identified, which may have been applied to maintain the uniformity of the barrel wall. While the two medium mortars (Treasure Nos. 858 and 859) are highly similar to each other in appearance, considering the difference in the arrangement of the chaplets between the two items it is likely that a different mold design was used for each item.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.5
• /
• pp.431-449
• /
• 2022

As many tunnels generally have been constructed, various experiences and techniques have been accumulated for tunnel design as well as tunnel construction. Hence, there are not a few cases that, for some usual tunnel design works, it is sufficient to perform the design by only modifying or supplementing previous similar design cases unless a tunnel has a unique structure or in geological conditions. In particular, for a tunnel blast design, it is reasonable to refer to previous similar design cases because the blast design in the stage of design is a preliminary design, considering that it is general to perform additional blast design through test blasts prior to the start of tunnel excavation. Meanwhile, entering the industry 4.0 era, artificial intelligence (AI) of which availability is surging across whole industry sector is broadly utilized to tunnel and blasting. For a drill and blast tunnel, AI is mainly applied for the estimation of blast vibration and rock mass classification, etc. however, there are few cases where it is applied to blast pattern design. Thus, this study attempts to automate tunnel blast design by means of machine learning, a branch of artificial intelligence. For this, the data related to a blast design was collected from 25 tunnel design reports for learning as well as 2 additional reports for the test, and from which 4 design parameters, i.e., rock mass class, road type and cross sectional area of upper section as well as bench section as input data as well as16 design elements, i.e., blast cut type, specific charge, the number of drill holes, and spacing and burden for each blast hole group, etc. as output. Based on this design data, three machine learning models, i.e., XGBoost, ANN, SVM, were tested and XGBoost was chosen as the best model and the results show a generally similar trend to an actual design when assumed design parameters were input. It is not enough yet to perform the whole blast design using the results from this study, however, it is planned that additional studies will be carried out to make it possible to put it to practical use after collecting more sufficient blast design data and supplementing detailed machine learning processes.