• Journal of agriculture & life science
• /
• v.43 no.3
• /
• pp.15-26
• /
• 2009

This study was undertaken to determine inhibitory compounds from extracts of the softwood (larix leptolepis, Pseudotsuga menziesii) sawdust against Trichoderma spp. The sawdust of L. leptolepis and P. menziesii were hot water extracted, which were with fraction extracted organic solvents. The organic solvent extractions were carried out by n-hexane, methylene chloride, ethyl acetate. The antifungal activity of hot water extracts of L. leptolepis sawdust was determined to be 20.6% inhibition at a concentration of 1,000 ppm against Trichoderma spp. The antifungal activity of P. menziesii sawdust was outstanding about 60.3% against Trichoderma spp. The yields of the fractions of n-hexane soluble, methylene chloride soluble and ethyl acetate soluble from the hot water extract of L. leptolepis sawdust were 4.0%, 6.0% and 8.0%, repectively. However, the yields of the fractions of three solvents of P. menziesii sawdust were 8.0%, 13.0 and 14.0% correspondingly. The antifungal activity of n-hexane soluble fraction from hot water extracts of L. leptolepis sawdust was highest to about 68.5% to 79.9% against Trichoderma spp. compared to others. The antifungal activities of n-hexane soluble fraction from hot water extracts of P. menziesii sawdust showed 68.5%, 71.4%. 71.9%, 75.7% and 82.3% against T. aggressivum, T. atroviride, T. harzianum, T. koningii and T.viride, respectively. The n-hexane soluble fraction revealed much higher antifungal activity than the other fractions did. This study demonstrated that the n-hexane fraction of the hot water extracts of L. leptolepis and P. menziesii exhibited the greatest antifungal activity against Trichoderma spp.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.93-101
• /
• 2008

Bearing strength test was investigated to determine the bearing properties of domestic larix glulam according to the load direction (in parallel to grain and in perpendicular to grain), the fastener (bolt and drift-pin), and the direction of laminae. The specimen was 5 ply glulam. The diameters of fastener are 12, 16 and 20 mm. The results were as follows. 1) In according to the diameter of bolt and drift-pin, the average of maximum bearing strength in parallel to grain loading was similar to that in perpendicular to grain loading. The average of maximum bearing strength was 1.50~2.31 times higher in parallel to grain loading than in perpendicular to grain loading. The average of maximum bearing strength in parallel to grain loading was lowered by 20% with increasing the diameter from 16 mm to 20 mm, but that in perpendicular to grain loading didn't show a clear tendency. 2) The average of bearing stiffness in parallel to grain loading was the highest at 16 mm in diameter. The average of bearing stiffness is similar to the shearing stiffness in drift-pin connection with increasing diameter. 3) In parallel to grain loading, the failure mode of specimens was the splitting along the grain in decreasing diameter. The failure mode in perpendicular to grain loading was the splitting along the grain. In this case, split occured more in specimens using bolt than in those using drift-pin. 4) The 5% offset yield strength in parallel to grain loading was similar to the predicted bearing strength of KBCS, NDS. In perpendicular to grain loading, the NDS's equation can be applied to predict the bearing strength.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.666-674
• /
• 2014

In this study, we investigated mechanical properties of Korean softwoods after applying thermal compression. Density of compressed woods was notably increased with thermal compression. In case of 50% compression set, density of Korean pine (Pinus koraiensis), Japanese red pine (P. densiflora), and Larch (Larix kaempferi) wood was increased by 71%, 74%, and 76%, respectively, when compared to the control group. The strength of woods was increased and quality of the woods became homogeneous with an increases in the compression set. On the 50% compression set, the compressive strength, bending strength, and hardness of Korean pine wood was increased by 76%, 83%, and 55%, respectively compared to the control group. Longitudinal compressive strengths of Japanese red pine wood increased by 69%, 130%, and 76%, respectively and those of Larch wood increased by 77%, 120%, and 44%, respectively. In thermal compression wood, mechanical properties of Larch wood was the highest, while those of Korean pine wood were the lowest. However, Japanese red pine wood showed the highest in the increase rate of mechanical properties after the thermal compression.

• The Korean Journal of Mycology
• /
• v.24 no.3 s.78
• /
• pp.228-236
• /
• 1996

Flesh fungi were collected during field trips to mountain areas throughout the country from May to October of 1994. Through the observation and identification of specimens belonging to the Aphyllophorales, one genus, Tylospora, and six species, Athelia fibulata, Hypochnicium punctulatum, Tylospora fibrillosa, Stereum ochraceo-flavum, Steccherinum litschaueri, and Oligoporus undosus were confirmed new to Korea and are registered here with descriptions.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.572-583
• /
• 2023

Demand for wood in construction is increasing worldwide. In Korea, technical reviews of high-rise Cross Laminated Timber (CLT) buildings are under way. In this paper, Floor Impact Sound Insulation Performance (FISIP) and Transmission Loss (TL) of 150 mm thick CLT floor panels made of two domestic species, Larix kaempferi and Pinus densiflora, are investigated. The CLT slabs were tested in reverberation chambers connected vertically. When comparing Single Number Quantity (SNQ) of FISIP of the bare panels, the Larix CLT is 3 dB lower in heavy-weight and 1 dB in light-weight than the Pinus CLT. However, there was no difference when concrete toppings were added to improve the performance. As the concrete toppings became thicker, the heavy-weight was reduced by 9 dB ~ 20 dB, and the light-weight by 20 dB ~ 30 dB. And the analysis of these results with area density has confirmed that the area densities are highly correlated (R² = 0.94 ~ 0.99) to the FISIP of the CLT. The types of CLT didn't affect the TL. Comparison of theoretical TL values with measured TL values has shown that the frequency characteristics are similar but 8 dB ~ 12 dB lower in measured values. The relationship between the TL and frequency characteristics of the tested CLT slabs was derived by using the correction value.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.674-691
• /
• 2019

The aim of this study was to evaluate the anti-inflammatory effects of essential oils extracted from the wood of Chamaecyparis obtusa, Pinus densiflora, Pinus koraiensis, and Larix kaempferi. Essential oils were extracted by hydrodistillation, and their chemical components were determined by GC/MS. Major chemical components of these essential oils were ${\alpha}$-cadinol (19.25%), ${\tau}$-muurolol (14.20%), and ${\alpha}$-pinene (13.74%) in C. obtusa; ${\alpha}$-pinene (47.16%), longifolene (14.31%), ${\beta}$-phellandrene (11.78%), and ${\beta}$-pinene (11.02%) in P. densiflora; ${\alpha}$-pinene (13.49%) and longifolene (10.79%) in P. koraiensis, and geranyl linalool (23.58%) and ${\alpha}$-pinene (18.57%) in L. kaempferi. To evaluate the anti-inflammatory effects of essential oils, lipopolysaccharide (LPS)-induced RBL-2H3 mast cells were treated with these essential oils; then, the changes in the mRNA expression level of the cytokines IL-4 and IL-13 were examined. Further, degranulation was evaluated by measuring ${\beta}$-hexosaminidase release. After LPS-induced RBL-2H3 mast cells were exposed to $10^{-7}%$ of all types of essential oils, the gene expression levels of IL-4 and IL-13 within the cells remarkably decreased. The relative mRNA expression level of IL-4 was 69.6% in P. densiflora, 63.2% in P. koraiensis, 55.1% in C. obtusa, and 45.8% in L. kaempferi compared with that in the group treated with LPS. The mRNA expression level of L-13 should a similar trend. The inhibitory rate of IL-13 mRNA expression of P. densiflora, P. koraiensis, C. obtusa, and L. kaempferi was 57.8%, 57.1%, 51.1%, and 34.5%, respectively. ${\beta}$-Hexosaminidase release significantly decreased following the treatment with the four types of essential oils. The rate of ${\beta}$-hexosaminidase release were 38.1% C. obtusa; 33.0% P. densiflora; 27.4% P. koraiensis; and 9.1% L. kaempferi. Among all types of essential oils, that extracted from P. densiflora wood showed the highest anti-inflammatory activity. These results show that the tested essential oils exert an anti-inflammatory effect through the inhibition of degranulation and expression of cytokines.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.760-766
• /
• 2016

This study explored the effects of heating temperature and laminae thicknesses on the time required to heat the center of air-dried Paulownia tomentosa, Pinus sp., Abies sp., and Larix sp. laminae to $56^{\circ}C$, which is a minimum core temperature of wood packaging materials defined by ISPM 15 standard, and maintain for 30 minutes in dry heat treatment schedule. Heating times were different among wood species and were Pinus sp. ${\geq}$ Abies sp. > Paulownia tomentosa > Larix sp. in decreasing order. The differences in heating times of some species were significantly different statistically, but were not different enough in practical terms to warrant heating four species separately. Heating times decreased as heating temperature increased and followed approximately power-function relationship. Also, heating times increased linearly with increasing laminae thickness. These relationships make it possible to calculate intermediate heating times relative to experimentally observed heating times. The results of this study will serve as a guideline for heat sterilization of Chinese laminae species to meet heat treatment requirements for protection against invasive pests.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.746-756
• /
• 2015

The goal of this study was to review the wood shrinkage published in Journal of The Korean Wood Science and Technology from 1976 to 2015. Previous studies reported that shrinkage from Larix kaempferi in the tangential, radial, longitudinal directions ranged from 4.21%-9.79%, 2.09%-4.67%, 0.17%-0.33%, respectively. When different drying methods including closed cylinder drying, oven drying, and room temperature drying were used, volumetric shrinkage of Dipterocarpus grandiflorus was different, ranging from 31.6% to 21.0%. With an increment of the drying temperature of $115^{\circ}C$, $120^{\circ}C$, $125^{\circ}C$, the shrinkage of Larix kaempferi did not show a consistent trend. When sample size of Pinus densiflora was increased from $20{\times}20{\times}20mm$ to $100{\times}100{\times}100mm$, the tangential, radial and volumetric shrinkage decreased 2.61%, 1.32%, 0.80%, respectively. When a caliper having a sensitivity of 0.01 mm was used to measure $20mm^3$ specimen from Cryptomeria japonica, the measurement error occurred 1.97% in the radial direction and 35.7% in the longitudinal direction. From the previous studies, wood shrinkage could be influenced by sample size, drying method and measurement technique.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.1-12
• /
• 2007

For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.60-67
• /
• 2015

In order to evaluate the bond performance of domestic larch glulam and the glass fiber reinforced plastic (GFRP) rod, the specimen with the GFRP rod bonded-in domestic larch glulam for pull-out test was produced. The test was carried out using various specimens with different gluing depth, width of glue-line and type of adhesive. The cantilever type rahmen structure specimen with bonded-in GFRP rods was produced based on the result of pull-out test, and its moment resistance performance was compared and examined with the moment resistance performance of slotted-in steel plate specimen. As a result of the pull-out test, the most excellent bond performance was found when the insertion depth of GFRP rods was 5 times larger than the diameter of GFRP rods. When the glue-line thickness was 1 mm, the bond performance improved by 17%~29% in comparison to the bond performance in the case of the glue-line thickness of 2 mm. Also, the bonded strength of the specimen used with poly-urethane adhesive was 2.9~4.0 times greater than the bonded strength of specimen used with resorcinol adhesive. The cantilever type rahmen structure specimen with bonded-in GFRP rods showed the moment resistance performance 0.82 times lower in comparison to the slotted-in steel plate specimen used with the drift pin, but the initial stiffness was similar as 0.93 times.