• Resources Recycling
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2010

The spheric sintered body with $6{\pm}2mm$ diameter was manufactured in a rotary kiln at $1125^{\circ}C$/15 min using green body formed by pelletizing the batch powder composing of coal bottom ash produced from power plant and dredged soil by 70:30, wt%. And the physical properties of sintered body (BD) were analyzed to confirm the possibility for applying to an absorbent to restore a contaminated soil. The sintered body had a giant pore above 100 ${\mu}m$ and a fine pore below 10 ${\mu}m$, and bulk density was 1.4. Also its specific surface area, porosity and void proportion were $12.0m^2/g$, 30.1% and 38.2% respectively. The crushed body (BD-C), produced by crushing a BD specimen into an irregular shape with a aspect ratio of about 2, was similar to BD specimen at bulk density and pore size distribution. But it had superior values of specific surface area, porosity and void proportion compared with BD specimen owing to a decreased apparent volume due to conversion of closed pore existed at interior of BD to open pore during a crushing process. The IEP of sintered body occurred at about pH=5, so the optimum pH condition of reacting aqueous solution could be known before bonding a microbe to the sintered body. Hence, the optimum void proportion and porosity of an absorbent can be obtained by appropriate mixing a BD with BD-C from the base data calculated in this study.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.328-332
• /
• 2010

In this study, porous ZnO sphere and Cu-ZnO composite were synthesized by coprecipitation method in diethylene glycol solvent. The physicochemical properties of as-prepared composite materials were characterized by SEM, XRD, $N_2$-sorption and $H_2$-TPR. A series of porous Cu-ZnO with different Cu contents (0, 6.6, 21.3, 36.4, 54.6, 77.8 wt%) was investigated for CO oxidation activity in a fixed bed reactor system. With increasing Cu content in Cu-ZnO the surface area and micropore volume of Cu-ZnO are decreased and Cu (36.4 wt%)-ZnO shows higher activity for CO oxidation compared to the others.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2011

Tetraethoxysilane(TEOS) as a silica precursor and hydrochloric acid as an acid catalyst have been used in a surfactant-template synthesis of micrometer-sized mesoporous silica microspheres based on the macroemulsion technique. Increase in the concentration of tetraethoxysilane of the reaction mixture has a serious destructive effect on the particle shape and pore structure. As the acid concentration increases, relatively small microspheres are formed without destroying their spherical morphology of the particles as well as the pore structures. However, due to the attractive interaction between particles in an acidic condition, strong silica agglomerates are formed, and therefore are subject to a post-ultrasonic treatment to separate into an individual single particle.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.258-263
• /
• 2008

The fine aggregates of below 2 mm size was fabricated using by the vertical furnace in which the aggregates could be sintered at floating state and its physical properties were analyzed. The liquid formed at the surface of specimens sintered at $1200{\sim}l300^{\circ}C$ induced a gas in core to expand so the denser shell and porous core could be produced. The C series specimen fabricated by crushing an extruded body had an irregular shape and sharp edges but those became spheroidized by bloating due to gas expansion inside. The fine aggregates fabricated in this study was as light as floating in the water and had an apparent density of $0.68{\sim}1.08$. The absorption rate was proportioned to a porosity showing that the pores in core was not closed completely. The properties of fine aggregates fabricated in vertical furnace were similar with those of in an electric muffle furnace but the sticking-together phenomenon by surface fusion was not occurred in the vertical furnace. The aggregates fabricated in this study had a little lower impact resistance than that of natural aggregate but satisfied the unit volume weight standard specified in KS.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.528-533
• /
• 2004

Macroporous SiC with pore size 84∼658 nm and mesoporous SiC with pore size 15∼65 nm were respectively prepared by infiltrating low viscosity preceramic polymer solutions into the various sacrificial templates obtained by natural sedimentation or centrifuge of 20∼700 nm silica sol, which were subsequently etched off with HF after pyrolysis at 1000∼140$0^{\circ}C$ in an argon atmosphere. Three-dimensionally long range ordered macroporous SiC ceramics derived from polymethylsilane (PMS) showed surface area 584.64$m^2$g$^{-1}$ when prepared with 112nm silica sol and at 140$0^{\circ}C$, whereas mesoporous SiC from polycarbosilane (PCS) exhibited the highest surface area 619.4 $m^2$g$^{-1}$ with random pore array when prepared with 20-30 nm silica sol and at 100$0^{\circ}C$. Finally, tile pore characteristics of porous SiC on the types of silica sol, polymers and pyrolytic conditions were interpreted with the analytical results of SEM, TEM, and BET instruments.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.46-55
• /
• 1989

Stomatal variation was observed at the Yeongnam Crop Experiment Station in 1988 using 42 rice cultivars and 30 weed species. The shape, density or size of stomata was varied depending on the species. Two general trends, however, were found that more number of stomata was found at lower leaf epidermis than upper leaf epidermis and stomata number was negatively correlated with stomata size. Aneilema japonica and Portulaca oleracea had the least number of stomata having 17-20 stomata per $m^2$ for upper leaf epidermis and 17-54 stomata for lower leaf epidermis while Polygonum conspicuum had the greatest number of stomata (449 for upper leaf epidermis and 511 for lower leaf epidermis). Soybean, Aeschynomene indica, Ludwigia prostrata and Lactuca indica had the smallest in stomata size while the biggest stomata was found at P. oleracea and A. Japonica that had the least number of stomata. Cyperus species such as C. difformis, C. iria and C. serotinus had no stomata at upper leaf epidermis. The stomata were distributed only at lower leaf epidermis for these species. Potamogeton distinctus, on the other hand, had stomata almost at upper leaf epidermis and thus, hardly found the stomata at lower leaf epidermis. Among rice cultivars, Tongil-type had the greatest number of stomata followed by Indica-type and Japonica-type, in order. Cultivars released after 1960 had more stomata than cultivars released before 1960 for Japonica-type cultivars while stomata size had reversed trend. Jinheung had the least number of stomata (${\fallingdotseq}$ 150 per $mm^2$) while Yushin had the greatest number of stomata (350 for upper and 449 for lower leaf epidermis, respectively) among rice cultivars. Other cultivars having more than 350 stomata per $mm^2$ were Samgangbyeo, Milyang 23, Woonbongbyeo, etc.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.126-127
• /
• 2007

본 연구는 Microwave를 이용하여 활성탄의 재생특성을 파악하는데 목적을 두었다. Microwave의 조사횟수를 달리하였을때 활성탄의 특성 변화분석하였다. BET 분석결과 조사 후 분석 값이 조사 후 분석 값보다 떨어짐을 알 수 있다. 이는 MW를 조사함으로써 활성탄의 온도가 상승이 되고 이로 인해 기공의 파괴가 있음을 알 수 있다. 각 물질별로 20번씩 조사 하여서 나타난 결과를 보면 비표면적이 각각 8.2%(A), 5.68%(B), 0.38%(C) 줄었다. 활성탄 C의 경우는 조사 후 감소된 면적이 가장 적었는데 이는 먼저 제조하였던 활성탄의 경우는 활성탄의 성분이 제기능이 못할 정도로 소성을 하였거나 탄소성분의 변질이 있었음을 알 수 있다.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.357-363
• /
• 1996

다공성 알루미나 지지체를 이용하여 졸에 침지하는 미세한 기공으로 이루어진 티타니아 여과막을 제조하였다. 티타니아 졸은 현\ulcorner액 재안정화 공정으로 제조하였고, pH 1.23-1.32범위에서 졸의 평균입지크기는 15nm 이하였다. 이 여과막은 $600^{\circ}C$에서 1시간 열처리한 경우 평균입도는 30-40nm로서 입도 분포가 좁은 양호한 여과막을 제조하였다. 이때 입자의 모양은 구형이었다. 열처리 온도가 $600^{\circ}C$보다 높아지면 여과막을 구성하는 입자 모양을 다각형으로 변하고 입도의 분포는 넓어졌다.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.466-470
• /
• 2008

The objective of this study is to convert methane into hydrogen using a nanoporous catalyst in the $CO_2$ containing syngas generated from the gasified waste. For the purpose, $Ni/Al_2O_3$ catalyst was prepared with the one-pot method. According to analyses of the catalyst, three dimensionally linked sponge shaped particles were created and the prepared nanoporous catalysts had larger surface area and smaller particle size and more uniform pores compared to the sphere shaped commercial catalyst. The catalyst for reforming reaction gave the highest $CH_4$ conversion of 91%, and $CO_2$ conversion of 92% when impregnated with 16 wt% of Ni at the reaction temperature of $750^{\circ}C$. At that time, the prepared catalyst remarkably improved the $CH_4$ and $CO_2$ conversion up to 20% compared to the commercial one.

• Korean Journal of Plant Resources
• /
• v.12 no.1
• /
• pp.50-61
• /
• 1999

The leaf morphological and anatomical characters about 17 taxa of Aster and its allied taxa were investigated to estimate taxonomic values. Leaf shapes of the treated taxa were divided into five types; elliptic, spathulate, lanceolate, linear, ovatodeltoid. These types were fixed in same taxa, but variable among different taxa, therefore useful as taxonomic character. Leaf margins were divided into four types; entire, serrate, dentate, incised, these types were invariable in most taxa, but variable among individual in same taxa such as Kalimeris incise, Aster spathulifolius. The size and shape of leaf epidermal cell, the size and distributional numbers per 10$\textrm{mm}^2$ of stomata, deposit feature of cuticle were not distinguished clearly from treated taxa, but presence of stomata on adaxial surface, size and distributional numbers per 10$\textrm{mm}^2$ of stomata were useful taxonomic characters in some taxa such as Gymnaster koraiensis, Aster altaicus var. uchiyamae, Aster tripolium, Heteropappus arenarius. The leaf trichomes were divided into five types by basic form, sculpturing on their outer surface and cell arrangement; uniseriate granulate conical type, uniseriate psilate conical type, uniseriate psilate filiform type, globular type, biseriate vesicular capitate type. In spite of various habitat, basic morphology of trichomes were not changed, therefore, it was thought to be good taxonomic character.