• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.39-52
• /
• 2006

As accelerates the technical evolution of high-speed network and progresses the digitalization of broadcasting network, TV channel service through satellite/cable/terrestrial networks becomes more stable and mature. However, TV channel service using IP network such as IPTV is recently emerging. Especially, when it comes to current mosaic EPG(Electronic Program Guide) as a channel guide, the implementation of EPG via IP network is under developing. Furthermore, the personal target mosaic EPG is not provided at all in the IPTV. This paper proposes a construction method of mosaic system which can support fixed and personalized mosaic EPG using IP network for viewers. The fixed mosaic EPG is made several steps as follows ; First, H/E generates several mosaic A/V streams. Then, which are transmitted to the STB in terms of multicasting via IP network. Finally, mosaic EPG is displayed on TV through STB. In addition, this paper describes a construction model of the personalized A/V mosaic EPG that represents each person's favorite channels according to their tastes and interests. As for the contributions. The TV channel guide using IP network enable viewer to select channel more easily with practical adaptation of multi-channel expansibility and sufficient usability. In addition, through personal mosaic EPG, a number of viewers can compose their own mosaic EPG and enjoy a variety of channel easily in accordance with their preferences. Finally, the personal mosaic EPG can prohibit non-adult users from connecting adult-only contents more efficiently.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2005

For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.519-526
• /
• 2018

In this study, an algorithm to predict evacuation routes in support of shipboard lifesaving activities is presented. As the first step of algorithm development, the feasibility and necessity of an evacuation route prediction algorithm are shown numerically. The proposed algorithm can be explained in brief as follows. This system continuously obtains and analyzes passenger movement data from the ship's monitoring system during non-disaster conditions. In case of a disaster, evacuation route prediction information is derived using the previously acquired data and a prediction tool, with the results provided to rescuers to minimize casualties. In this study, evacuation-related data obtained through fire evacuation trials was filtered and analyzed using a statistical method. In a simulation using the conventional evacuation prediction tool, it was found that reliable prediction results were obtained only in the SN1 trial because of the conceptual and structural nature of the tool itself. In order to verify the validity of the algorithm proposed in this study, an industrial engineering tool was adapted for evacuation characteristics prediction. When the proposed algorithm was implemented, the predicted values for average evacuation time and route were very similar to the measured values with error ranges of 0.6-6.9 % and 0.6-3.6 %, respectively. In the future, development of a high-performance evacuation route prediction algorithm is planned based on shipboard data monitoring and analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.535-541
• /
• 2008

As the concurrent engineering concept has emerged along with the support of optimization techniques, lots of endeavors have been made to apply optimization techniques to actual design problems for a holistic decision. Even if the range of design problems which the optimization is applicable to has been extended, most of ship designs still remain in an iterative approach due to the difficulties of seamless integration of all related design activities. In this approach, an entire design problem is divided into many sub-problems and carried out by many different disciplines through complicated internal interactions. This paper focuses on preliminary ship design process. This paper proposes a process centric integrated framework as the first step to establish a workflow based design process management system. The framework consists of two parts; a schedule management part to support a manager to monitor current progress status and adjust current schedule, and a process management part to assist a design to effectively perform a series of design activities by following a predefined procedure. Overall system are decomposed into modules according to the target to be managed in each module. Appropriate interactions between the decomposed modules are designed to achieve a consistency of the entire system. Design process model is also designed on a thorough analysis of actual ship design practice. The proposed framework will be embodied using a commercial workflow package.

• Journal of KIISE
• /
• v.43 no.4
• /
• pp.450-459
• /
• 2016

Every year, RDFS data tends further toward scalability; hence, the manner of SPARQL processing needs to be changed for fast query. The query processing method of SPARQL has been studied using a scalable distributed processing framework. Current studies indicate that the query engine based on the scalable distributed processing framework i.e., Hadoop(MapReduce) is not suitable for real-time processing because of the repetitive tasks; in addition, it is difficult to construct a query engine based on an In-memory Distributed Query engine, because distributed structure on the low-level is required to be considered. In this paper, we proposed a method to construct a query engine for improving the speed of the query process with the mass triple data. The query engine processes the query of SPARQL using the SparkSQL, which is an In-memory based, distributed query processing framework. SparkSQL is a high-level distributed query engine that facilitates existing SQL statement. In order to process the SPARQL query, after generating the Algebra Tree using Jena, the Algebra Tree is required to be translated to Spark Algebra Tree for application in the Spark system, and construction of the system that generated the SparkSQL query. Furthermore, we proposed the design of triple property table based on DataFrame for more efficient query processing in the Spark system. Finally, we verified the validity through comparative evaluation with the query engine, which is the existing distributed processing framework.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.10a
• /
• pp.3-3
• /
• 1992

타이어 Curing공정은 공기압 타이어의 제조시 상당히 정교한 단계를 거쳐서 이루어지며, 이는 타이어 설계에 큰 영향을 줄 뿐만아니라, 타이어의 성능에도 관건이 있다. 본 연구에서는 유한요소법을 이용하여 타이어의 molding 공정을 분석하였다. 유한요소해석 프로그램인 MARC가 Cured 타이어 내부의 Curing Bladder 팽창과정해석에 이용되었다. 비압축성 요소로 Curing Bladder를 모형화하였으며, MARC의 접촉문제해석기법(contact option)을 이용하여 Cured 타이어 내부와 Curing Bladder 외부의 접촉부위를 Simulation하였다. 본 연구의 주요 관심내용으로서는 Curing Bladder의 형상변화에 따른 Curing Bladder의 팽창거동해석과, Cured타이어와 Curing Bladder의 접촉부위에서 얻을 수 있는 접촉압력의 비교.검토이다. 타이어 Curing시 타이어와 Bladder의 Contact과정을 해석하여, 아래와 같은 결과를 도출하였다. Bladder의 형상은 Cylinderical 형상 보다는 Toroidal 형태가 접촉압 분포의 균일성 및 크기 측면에 서 우수한 것으로 판단된다. Curing Bladder의 증심선 부위 보다 이에서 약간 떨어진 부위에서 최대 접촉압력이 발생되며, 이는 타이어 내면의 굴곡현상과 깊은 관련이 있윰 것으로 사료된다. 타이어 Bead부의 Carcass 자연평형현상이 유지된 제품을 얻기위해서는, Side-Bead구간의 접촉압력 증가가 필요하며, 이를 위하여는 Bladder 형상이 Cylinderical 보다는 Toroidal 형태가 유리하고, Bead부의 Gage Down, 전체직경의 증가 및 높이의 증가가 유리한 것으로 판단된다. 본 연구 결과를 이용하여, 타이어 Curing과정에서 발생되는 불량제품의 원인파악 및 타이어 설계자가 원하는 제품생산의 불가능한 원인을 파악하는데 도움을 줄 것이다.를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.417-424
• /
• 2002

컴퓨터는 인간의 모든 꿈과 희망을 실현시켜 줄 수 있는 마법상자는 아니다. 정보화 시대라고 일컫는 현재, 정보의 가치를 더해주는 컴퓨터의 중요성은 날로 커지고 있는 반면 인간의 존엄성은 경시되고 있다. 많은 사람들은 요즘 사회가 커다란 도덕적 위기에 빠졌다고 걱정하지만 컴퓨터 사용과 관련된 윤리적 문제에 대해서는 심각하게 느끼지 못하고 있는 것 같다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 정보통신 기술의 발달에 따라 새로운 교육의 필요성이 대두되고 있다. 기존의 전통적인 교육방식에서 사이버 윤리 교육은 교과서 중심의 단편적인 교육이었기 때문에 학습자의 흥미를 유발하지 못하였으며, 교육자와 학습자의 상호작용이 부족하여 사이버 윤리 교육의 효과가 미흡하였다. 이런 관점에서 본 논문은 정보통신 시대가 수반하고 있는 사회적 영향력과 윤리적 이슈들에 대하여 좀더 교육적인 측면으로 접근해 윤리교육의 현황과 문제점, 그리고 체계적인 확산방안에 대해 살펴보았다. 본 논문에서는 사이버공간에서 윤리 교육을 받는 청소년들을 중심으로 그들에게 새로운 윤리교육의 한 형태인 사이버공간에서 관련된 문제들을 교육적인 측면으로 해결할 수 있는 방안을 제시하고자 한다. 그러나, 무엇보다 우리가 명심해야 할 것은 인간의 존엄성은 그 어떤 이유를 막론하고 존중되어야 한다는 사실이다. 검증되지 않은 스토리 보드에 의한 저작 단계로 바로 돌입하고 있는 것이 한국의 실정이라 하겠다. 따라서 본 프로젝트에 의해 개발 된 교수 설계 도구는 교육/학습 컨텐츠의 품질 보증을 위한 방법론인 교육 공학의 체제적 교수 설계 이론 Model (Instructional System Design Model), 특히 그 중에서도 이 분야의 사실상의 표준 이론(de facto standard)인 Dick & Carey 교수와 Gagne 교수의 인지주의 ISD Model을 기반으로 정교한 교수 설계와 코스 맵 설계를 가능하게 함으로써 학습 컨텐츠의 품질 보증 활동을 지원 할 수 있는 도구로 개발하였다. 특히 Linux 기반에서 PHP로 개발 함으로써 Platform에 구애받지 않은 사용 환경을 구현 하였으며 향후 많은 e-Learning Platform에 교수 설계 모듈로 장착 함으로써 기존의 e-Learning Platform들의 가치를 높일 수 있는 계기가 될 것으로 생각한다.실징후를 파악하는데 그치지 않고 부실의 원인을 파악하고 이에 대한 대응 전략을 수립하며 그 결과를 측정하는데 활용될 수도 있다. 따라서 본 연구에서는 기업의 부도예측 정보 중 현금흐름정보를 통하여 '인터넷기업의 미래 현금흐름측정, 부도예측신호효과, 부실원인파악, 비즈니스 모델의 성격규정 등을 할 수 있는가'를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(

• Land and Housing Review
• /
• v.4 no.4
• /
• pp.383-393
• /
• 2013

The trends of green growth and eco-friendliness came to be the core development indicator for the sustainable global environment. Korean government reflected these trends in the main flows of the national development index, and suggested diverse directions for green construction technologies and high quality construction environment through Third master plan for construction environment. However, the efforts to follow these trends during the construction process as a step for production phrase are not being considered enough yet. In this study, we identified the basic environmental management factors in order to enhance the eco-friendliness of public housing construction sites, and suggested the reasonable conducting parties and process for those respective factors. The results of this study are expected to be the valuable reference in defining the required activities and participants' responsibilities, and improving the work process for systematic on-site environmental management. In applying those results, the discussion should be followed on the executing party of each unit activity and the responsibility assignment for each process. At the same time, the legislation and standard related to environment need to be essentially amended. In the future, the method of evaluating the environmental management activities, and the technical solution to environmental problems are to be reviewed as a further research for successful environmental management.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.235-245
• /
• 2005

The rapid development of computer network technology has brought the Internet as the major infrastructure to our society. But the rapid increase in malicious computer intrusions using such technology causes urgent problems of protecting our information society. The recent trends of the intrusions reflect that the intruders do not break into victim host directly and do some malicious behaviors. Rather, they tend to use some automated intrusion tools to penetrate systems. Most of the unknown types of the intrusions are caused by using such tools, with some minor modifications. These tools are mostly similar to the Previous ones, and the results of using such tools remain the same as in common patterns. In this paper, we are describing design and implementation of attacker-traceback system, which traces the intruder based on the multi-agent architecture. The system first applied SOM to classify the unknown types of the intrusion into previous similar intrusion classes. And during the intrusion analysis stage, we formalized the patterns of the tools as a knowledge base. Based on the patterns, the agent system gets activated, and the automatic tracing of the intrusion routes begins through the previous attacked host, by finding some intrusion evidences on the attacked system.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.11-20
• /
• 2020

As the manufacturing environment becomes more complex, traditional simulation models alone are having a lot of difficulties in reflecting real-time manufacturing situations. Although the Digital Twin concept is actively discussed as an alternative to overcome theses issues, many studies are being carried out only in the product design phase. This research presents a Digital Twin-based manufacturing environment framework for applying the Digital Twin concept to the manufacturing process. Twin model that is operated in virtual space, physical system and databases describing the actual manufacturing environment, are proposed as detailed components that make up the framework. To check the applicability of proposed framework, a simple Digital Twin-based manufacturing system was simulated in a conveyor system using Arena software and Excel VBA. Experiment results have shown that the twin model is transmitted real time data from the physical system via DB and were operating in the same time unit. The Excel VBA fitted parameters defined by cycle time based on historical data that real-time and training data are being accumulated together. This study proposes operating method of digital twin model through the simple experiment examples. The results lead to the applicability of Digital twin model.