• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.37-46
• /
• 1996

This paper describes a system that can be used to recognize unknown materials regardless of the change in ambient temperature by using temperature response curve fitting and fuzzy neural network(FNN). There are problems with a recognition system which utilize temperature responses. It requires too many memories to store the vast temperature response data and it has to be filtered to remove the noise which occurs in experiments. Thus, this paper proposes a practical method using curve fitting to remove the above problems of memories and noise. Also, the FNN is proposed to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperatures and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperatures. So the material can be recognized via its thermal conductivity.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.76-85
• /
• 2012

This paper proposes a robust damper design technique for adjacent structures against model uncertainty. This approach introduces multi-objective optimization based system identification using measurement information which enables reasonable selection of the perturbation range in the robust design. Moreover, in order to improve the numerical efficiency in sampling the structural models required for the robust design of large structures, we define new objective functions which enable us to minimize the number of candidate models suitable to the purpose of the robust design. In addition, the performance index is newly employed to evaluate the robust performance of the sampled structural models, and the robust design has been performed according to the performance index. As a numerical example to demonstrate the efficiency of the proposed method, 5-story and 10-story two adjacent buildings are taken into account, and the existing and newly proposed robust design approaches are compared with each other. The results demonstrate that the proposed approach can guarantee more robust damper system only using small number of samples of the structural models because of using the measurement information which leads to improvement in the numerical efficiency, compared with the existing robust design methods.

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.33-47
• /
• 2007

The requirements have been changed during development progresses, since it is impossible to define all of software requirements. These requirements change leads to mistakes because the developers cannot completely understand the software's structure and behavior, or they cannot discover all parts affected by a change. Requirement changes have to be managed and assessed to ensure that they are feasible, make economic sense and contribute to the business needs of the customer organization. We propose a feature-oriented requirements change management method to manage requirements change with value analysis and feature-oriented traceability links including intermediate catalysis using features. Our approach offers two contributions to the study of requirements change: (1) We define requirements change tree to make user requirements change request generalize by feature level. (2) We provide overall process such as change request normalization, change impact analysis, solution dealing with change request, change request implementation, change request evaluation. In addition, we especially present the results of a case study which is carried out in asset management portal system in details.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.259-268
• /
• 2012

This paper aims to estimate the carbon dioxide stocks in forests using airborne LiDAR data with a density of approximate 4.4 points per meter square. To achieve this goal, a processing chain consisting of bare earth Digital Terrain Model(DTM) extraction and individual tree top detection has been developed. As results of this experiment, the reliable DTM with type-II errors of 3.32% and tree positions with overall accuracy of 66.26% were extracted in the study area. The total estimated carbon dioxide stocks in the study area using extracted 3-D forests structures well suited with the traditional method by field measurements upto 7.2% error level. This results showed that LiDAR technology is highly valuable for replacing the existing forest resources inventory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.93-96
• /
• 2017

DDS (Data Distribution Serivce) communication middleware is spreading to various private sector as well as the defense sector because it can obtain a very high application effect in a complex system environment in which a plurality of data producers and data consumers are connected by a network. However, application development using DDS middleware is an inefficient structure with a lot of repetitive codes because most users perform 1: 1 mapping with the message they want to exchange. Accordingly, the user has to perform unnecessary repetitive tasks as the topic increases. Therefore, a development support tool that identifies a series of processes required for using DDS middleware and automatically generates the classes that are repeated by Topic is required. In this paper, we propose a method for DDS communication by automatically generating a common class for efficient use of DDS middleware.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5S
• /
• pp.1726-1735
• /
• 2000

Internet purchase is increasing according to the activation of Electronic Commerce. Currently, the hardware is main purchase items in the Electronic commerce. The on-line purchase of digital product, that is electronic file type of product, has many merits such as, does not cost in logistics, is ease of searching the product, and is possible of 'Try and Buy' system. But, actually digital products have not been major proudct because of tits piracy problem. The piracy problem of digital products comes from the lack of safety in DP license control technology. Current EC has no method to identify the object that has the right ot use the digital product. The protecting of object change is impossible and the protection of hacking is not enough and EC has any problems in efficient license control because of the incompletion of EC structure. In this paper, e propose the design and implementation of on-line DP circulation system, which can activate on-line circulation of DP in EC and protect its piracy, by using the new license control technology, that is Dynamic License control technology.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.88-96
• /
• 2013

Recent proliferation of building information modeling (BIM) has actively stimulated integrated utilization of geometric (graphic) and non-geometric (non-graphic) data. Nevertheless, physically and logically, linking and maintaining these two different types of data in an integrated manner requires enormous overhead efforts for practical implementation. In order to address this problem, this paper proposes a concept and structure of the object breakdown structure (OBS) that facilitates advanced BIM implementations in an automated and effective manner. Proposed OBS numbering system has secure rules for organizing graphic objects in full considerations of effectively integrating with non-geometric data (e.g. cost and schedule). It also removes repetitive linking process caused by design changes or modifications. The result of applying this concept to a housing project revealed that only 120 definitions controled over 6,000 graphic objects for full integration with cost and schedule functions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1619-1624
• /
• 2008

Recently, In order to provide ubiquitous service, we develop each middleware and interface for sensors networks, RFID(Radio Frequency IDentification) and GPS(Global Positioning System). We use GPS for the location-based services, RFID for identifying the distribution logistics services, sensor networks for collecting the context data such as temperature, humidity, barometric pressure. Recently, there is increasing the need of integrated interface for using these sensor elements complexly in agriculture and livestock, construction, medical applications and, etc. This paper developments a integrated common interface for supporting efficiently process of sensing data using RFID, GPS and sensor network. This interface have the filtering function, parsing function, queuing function, interface management function, access function and, etc. We present the integrated frame structure combined with the collected context data in GPS, RFID and sensor networks and, support the open interface for providing complex ubiquitous application systems. Therefore, this interface will be efficiently used the system using RFID, GPS and sensor network, and supported many ubiquitous application services.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.4
• /
• pp.135-144
• /
• 2018

The domestic pigsty environment is highly vulnerable to the spread of respiratory diseases such as foot-and-mouth disease because of the small space. In order to manage this issue, a variety of studies have been conducted to automatically analyze behavior of individual pigs in a pig pen through a video surveillance system using a camera. Even though it is required to correctly segment touching pigs for tracking each pig in complex situations such as aggressive behavior, detecting the correct boundaries among touching pigs using Kinect's depth information of lower accuracy is a challenging issue. In this paper, we propose a segmentation method using motion information of the touching pigs. In addition, our proposed method can be applied for detecting tracking errors in case of tracking individual pigs in the complex environment. In the experimental results, we confirmed that the touching pigs in a pig farm were separated with the accuracy of 86%, and also confirmed that the tracking errors were detected accurately.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.632-637
• /
• 2014

In this paper the concept of the performance-based logistics (PBL) support for weapon systems is discussed and an enhancement is studied such that prior to the Operational phase, the development of the PBL can begin from the Engineering & Manufacturing Development (EMD) phase together with multiple performance indices considered. The genetic algorithm should be considered for the complex system to solve the maintenance policy optimization. In particular, the requirement of repair level analysis model is developed based on reflecting the PBL concept. To decide the maintenance policy prior to Operational phase in accordance with customer requirements, the PIDO(Process Integration and Design Optimization) technique useful in choosing the performance indices and changing the constraints was used. The genetic algorithm of PIDO tool, like PIAnO and ModelCenter, was verified that it could be applied to optimize the maintenance policy.