• Journal of Life Science
• /
• v.24 no.8
• /
• pp.820-826
• /
• 2014

The localization to specific subcellular sites and the regulation of cell surface receptors and channels are crucial for proper functioning. Postsynaptic density-95/Disks large/Zonula occludens-1 (PDZ)-domain is involved in recognition of and interaction between various proteins, by which the localization and the regulation are mediated. Multi-PDZ domain protein 1 (MUPP1) contains 13 PDZ domains. MUPP1 serves a scaffolding function for structure proteins and signaling proteins, but the mechanism how MUPP1 is stabilized and signalized has not yet been elucidated. We used the yeast two-hybrid system to identify proteins that interact with PDZ domains of MUPP1. We found an interaction between MUPP1 and Parkin. Parkin is an E3 ubiquitin ligase. Loss-of-function mutations of Parkin gene are known to cause an autosomal recessive juvenile parkinsonism. Parkin bound to the $12^{th}$ PDZ domain, but not to other PDZ domains of MUPP1. The C-terminal end of Parkin has a type II PDZ-association motif, which was essential for the interaction with MUPP1 in the yeast two-hybrid assay. When co-expressed in HEK-293T cells, Parkin co-localized with MUPP1. When co-expressed with ubiquitin in HEK-293T cells, MUPP1 has been strongly ubiquitinated by Parkin. These findings collectively suggest that MUPP1 is a novel substrate of Parkin and its function or stability could be modulated by Parkin-mediated ubiquitination.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.762-769
• /
• 2002

As a preliminary test for defining intact yellow croaker pigment, the pigment was analyzed by column chromatography and UV-vis spectrophotometry. All maximum absorbance wavelengths commonly showed three maximum absorbance ranges, similar to those of carotenoid, suggesting that the tested pigment may be carotenoid. We detected total six peak RT values in the chromatogram through PDA-HPLC under gradient mode (behavior A at 10% for initial 2 min and changed to behavior B for 60 min). Most pigments were detected at the peak with 3.27 RT value. Because seven peaks were detected under gradient mode and three under isocratic mode [methanol : methylene chloride (90 : 10, v/v)], gradient mode was determined to be more appropriate for quantitative analysis. By the comparison test of RT values among yellow pigment in croakers and reference pigments, such as zeaxanthine, ${\beta}-cryptoxanthine$, ${\beta}-carotene$, and astaxanthin, only ${\beta}-cryptoxanthine$ was detected in the white croaker, whereas such pigment of yellow croaker having RT value of 31.02 was not detected. Therefore, RT value was found to be applicable for detecting adulterated croaker.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.3
• /
• pp.257-264
• /
• 2011

In this study, to evaluate the antioxidative activities and anti-inflammatory effects of kaempferol and its rhamnosides, we performed the free radical scavenging assay, ROS inhibition assay and TARC (thymus and activation-regulated chemokine) assay. Also, we studied physiological activity of kaempferol and its rhamnosides (${\alpha}$-rhamnoisorobin, afzelin, kaempferitn) by structure-activity relations. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activities were determined with kaempferol (62.5 ${\mu}M$) and ${\alpha}$-rhamnoisorobin (50.0 ${\mu}M$) but afzelin and kaempferitrin did not show free radical scavenging activities. Kaempferol showed a 97.5, 57.8, 47.8 % inhibition of ROS (reactive oxygen species) generated at concentrations of 10, 50 and 100 ${\mu}M$, compared to control (100 %). ${\alpha}$-rhamnoisorobin showed a 93.1, 59.1 and 41.4 % inhibition of ROS at the same concentration. We investigated the inhibitory effects of kaempferol and its rhamnosides on TARC expression. Kaempferol showed a 48.8, 5.5 and 4.4 % inhibition of TARC generated at 10, 50 and 100 ${\mu}M$, compared to control. ${\alpha}$-Rhamnoisorobin showed a 88.1, 19.0 and 1.0 % inhibition of TARC generated at the same concentration. In conclusion, these results indicate that kaempferol and ${\alpha}$-rhamnoisorobin have good antioxidative activities and anti-inflammatory effects that could be applicable to new functional cosmetics for anti-aging and anti-inflammation.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2012

Chemical Mechanical Planarization (CMP) is a polishing process used in the microelectronic fabrication industries to achieve a globally planar wafer surface for the manufacturing of integrated circuits. Pad conditioning plays an important role in the CMP process to maintain a material removal rate (MRR) and its uniformity. For metal CMP process, highly acidic slurry containing strong oxidizer is being used. It would affect the conditioner surface which normally made of metal such as Nickel and its alloy. If conditioner surface is corroded, diamonds on the conditioner surface would be fallen out from the surface. Because of this phenomenon, not only life time of conditioners is decreased, but also more scratches are generated. To protect the conditioners from corrosion, thin organic film deposition on the metal surface is suggested without requiring current conditioner manufacturing process. To prepare the anti-corrosion film on metal conditioner surface, vapor SAM (self-assembled monolayer) and FC (Fluorocarbon) -CVD (SRN-504, Sorona, Korea) films were prepared on both nickel and nickel alloy surfaces. Vapor SAM method was used for SAM deposition using both Dodecanethiol (DT) and Perfluoroctyltrichloro silane (FOTS). FC films were prepared in different thickness of 10 nm, 50 nm and 100 nm on conditioner surfaces. Electrochemical analysis such as potentiodynamic polarization and impedance, and contact angle measurements were carried out to evaluate the coating characteristics. Impedance data was analyzed by an electrical equivalent circuit model. The observed contact angle is higher than 90o after thin film deposition, which confirms that the coatings deposited on the surfaces are densely packed. The results of potentiodynamic polarization and the impedance show that modified surfaces have better performance than bare metal surfaces which could be applied to increase the life time and reliability of conditioner during W CMP.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2014

Purpose: Fibrous dysplasia is related to the mutation of gene encoding the alpha-subunit of a signal-transducing G-protein and has variable clinical course. Operation can be performed to prevent functional disorder or structural deformity. After curettage, autologous bone graft were used to fill the defects after curettage. The aim of this study is to compare the result of autogenous cancellous bone grafting and allogenic bone grafting for fibrous dysplasia. Materials and Methods: Among the patients who visit our hospital during the period of April, 1997 to October, 2013, we selected 34 patients who diagnosed fibrous dysplasia and visited our clinic over 1 year. There were 13 males and 21 females. Average age was 26.4 (range 2 to 57) years old. Autogenous bone graft (group I) in 5 cases, Non-autogenous bone graft (group II) in 30 cases. Iliac bone is used in all cases of autogenous bone graft. There were no significant difference in age, follow-up period, preoperational laboratory finding between two groups. Radiographic image was done to evaluate the recurrence of fibrous dysplasia or secondary degeneration. Results: There were four cases in recurrence (group I: 1 case, group II: 3 cases, p=0.554). In all recurrent cases, reoperations were done using curettage and autogenous iliac bone graft. There was no re-recurrence after reoperation. One case of secondary aneurysmal bone cyst was confirmed (group II) and 1 cases of pathologic fractures had developed (group I: 0 case, group II: 1 cases, p=0.559). No malignant change occurred. Conclusion: There were no significant difference between autogenous bone graft group and non-autogenous bone graft group. Our result suggested that autogenous bone graft seems to be good method to treat fibrous dysplasia, in the case of small volume of tumor lesion or non-weight bearing portion.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.39-50
• /
• 2001

In proceeding with orthodontic treatment, the prediction for the shape, growth rate and growth direction of mandible plays a major role to set up the treatment plan and determine its period and prognosis. Various approaches being made so far have shown that the linear and angular measurement using lateral cephalograms are relatively accurate to estimate them. This study was purposed to find the shape of mandible more clearly by preventing the overlap of the Condyle head area which appears in lateral cephalogram, and to estimate its growth rate by comparing the growth quantity and ratio via lateral area measurement. This experimental was performed against 40 patients total, of which Class I of 14, Class II of 9 and Class III of 17 consist. Wide open lateral cephalograms of 40 patients were taken over average period of 4 Year 3 Months, then the linear and angular measurements were carried out with 11 itemized lists. Autocad Rl4 application program was utilized to draw their appearance, measure and compare their lateral area. As a result of study, conclusions were made as follows; 1. Mandibular body length (gonion-menton) tended to increase in order of CIII, CI and CII, and Mandibular body length of CIII group had a tendency to grow twice faster than that of CII group. 2. In lateral items such as Go-Me, A-Cd, B-Cp, E-F and G-H, CIII showed a significant increase on the year-average quantity and rate of the growth, and especially apparent difference was observed in CIII group rather than CII group. 3. For the 4 Year 3 Months period, the year-average growth quantity of lateral area of the mandible was $1.0cm^2$ for Class I, $0.8cm^2$ for Class II and $1.4cm^2$ for Class III, which corresponds to $11.9\%,\;11.8\%\;and\;20.3\%$ of growth ratio respectively. Thus, growth ratio almost 2 times more than other groups was observed in group CIII while growth ratio between group CI and CII has little difference. 4. Considering the results as above, it can be proposed that the difference in size of the mandible between groups is caused by the difference in the growth rate and growth quantity of the mandible, which generated in the middle of growth, rather than the difference in size of congenital Jaw-bone.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.177-213
• /
• 2011

The purpose of this paper is to research on the liability and cases for space damage with reference to the space activity under the international space treaty and national space law of major countries. The United Nations has adopted two treaties relating to the liability for space damage as follows: the Outer Space Treaty of 1967 and the Liability Convention of 1972. Korea has enacted the Outer Space Damage Compensation Act of 2008 relating to the liability for space damages. The Outer Space Treaty of 1967 regulates the international responsibility for national activities in outer space, and the national tort liability for damage by space launching object. The Liability Convention of 1972 regulates the absolute liability by a launching state, the faulty liability by a launching state, the joint and several liability by a launching state, the person claiming for compensation, the claim method for compensation, the claim period of compensation, the claim for compensation and local remedy, the compensation amount for damage by a launching state, and the establishment of the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea regulates the definition of space damage, the relation of the Outer Space Damage Compensation Act and the international treaty, the non-faulty liability for damage by a launching person, the concentration of liability and recourse by a launching person, the exclusion of application of the Product Liability Act, the limit amount of the liability for damage by a launching person, the cover of the liability insurance by a launching person, the measures and assistance by the government in case of occurring the space damage, and the exercise period of the claim right of compensation for damage. There are several cases with reference to the liability for damage caused by space accidents as follows: the Collision between Iridium 33 and Cosmos 2251, the Disintegration of Cosmos 954 over Canadian Territory, the Failure of Satellite Launching by Martin Marietta, and the Malfunctioning of Westar VI Satellite. In the disputes and lawsuits due to such space accidents, the problems relating to the liability for space damage have been settled by the application of absolute(strict) liability principle or faulty liability principle. The Liability Convention of 1972 should be improved as follows: the clear definition in respect of the claimer of compensation for damage, the measure in respect of the enforcement of decision by the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea should be improved as follows: the inclusion of indirect damage into the definition of space damage, the change of the currency unit of the limit amount of liability for damage, the establishment of joint and several liability and recourse right for damage by space joint launching person, and the establishment of the Space Damage Compensation Review Commission. Korea has built the space center at Oinarodo, Goheung Province in June 2009. Korea has launched the first small launch vehicle KSLV-1 at the Naro Space Center in August 2009 and June 2010. In Korea, it will be the possibility to be occurred the problems relating to the international responsibility and the liability for space damage in the course of space activity. Accordingly the Korean government and launching organization should make the legal and systematic policy to cope with such problems.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.338-350
• /
• 1988

In order to solve the taxonomic problems of the genus Juniperus growing in South Korea, an identification key of the genus and species was developed bayed un flower structure, cane and seed shape, branching habit, tree form, leaf characteristics etc. of the 7 native species and the a exotic cultivars. The typical pattern of karyotype found by chromosome analysis of the species was used for the identification among morphologically similar species. The length of chromosome were ranged $9{\sim}15{\mu}m$ in all studied specie. J. chinensis, var. procumbens, and var. kaizuka sere tetraploid, 4n=44, var. globosa, var. procumbens, var. horizontalis, J. virginiada, J. rigida, J. rigida var. longicarpa, and J. coreana were diploid, 2n=22. The species in the Sabina section showed large variation in the length of chromosome and kinetochore position. The species in the Oxycedrus section showed the cytological characteristics that the 11th chromosome t-type(acrocentric), and the m-type abundant chromosome set was relatively uniform as compared to those of the Sabina section. The species in the Sabina section, which are planted in the large city area, show great morphological variation because many different ecotypes were mixed and often crossed among them. In summary, this study was able to make clear identification and to find out similarity among Juniperus, species by the morphological and cytological analysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.517-524
• /
• 2011

Eleven polyphenolic compounds, including procatechuic and chlorogenic acids, (+)-dihydroquercetin, rutin, isoquercitrin, quercitrin, (+)-dihydrokaempferol, trans-resveratrol, moracin, quercetin and 4-prenylmoracin were isolated and purified from the methanolic extract of defatted mulberry seed residue by a series of column chromatography including silica gel, Sephadex LH-20, and ODS-A, and their chemical structures were identified by spectral analysis. The antioxidant activities of the eleven isolated polyphenolic compounds were measured spectrophotometrically using DPPH radical. Among the eleven polyphenolic compounds tested, rutin ($IC_{50}=20.2\;{\mu}M$), isoquercitrin ($IC_{50}=22.5\;{\mu}M$), quercitrin ($IC_{50}=24.6\;{\mu}M$), quercetin ($IC_{50}=27.8\;{\mu}M$), (+)-dihydroquercetin ($IC_{50}=28.9\;{\mu}M$), and chlorogenic acid ($IC_{50}=30.6\;{\mu}M$) exhibited stronger antioxidant activity than L-ascorbic acid ($IC_{50}=31.5\;{\mu}M$) and ${\alpha}$-tocopherol ($IC_{50}=52.3\;{\mu}M$), whereas procatechuic acid ($IC_{50}=68.2\;{\mu}M$) showed lower activity. In addition, (+)-dihydrokaempferol ($IC_{50}=33.8\;{\mu}M$), trans-resveratrol ($IC_{50}=36.2\;{\mu}M$), moracin ($IC_{50}=47.6\;{\mu}M$), and 4-prenylmoracin ($IC_{50}=48.2\;{\mu}M$) exhibited moderate antioxidant activity. Furthermore, levels of the eleven polyphenolic compounds from three different types of mulberry seeds were quantified by HPLC, and their contents were as follows: rutin (311~60.0 mg/100 g)> quercitrin (7.2~34.2 mg/100 g)> (+)-dihydroquercetin (13.2~33.1 mg/100 g)> quercetin (15.8~19.5 mg/100 g)> 4-prenylmoracin (10.5~43.3 mg/100 g)> isoquercitrin (5.8~15.4 mg/100 g)> chlorogenic acid (0.0~15.3 mg/100 g)> moracin (4.7~7.2 mg/100 g)> procatechuic acid (0.0~11.6 mg/100 g)> (+)-dihydrokaempferol and trans-resveratrol (<0.1 mg/100 g). The 'Daesungppong' mulberry seeds among the three cultivars had higher flavonoid contents, such as rutin and quercetin derivatives, while the 'Iksuppong' seeds had the highest contents of phenolic acids and moracin derivatives. 'Cheongilppong' had lower amounts of polyphenolic compounds than the other two mulberry seeds. These results indicate that mulberry seeds containing antioxidant polyphenolic compounds may be potentially useful sources of anti-diabetic, anti-hypertensive, and anti-aging agents for functional foods and cosmetics.

• Clean Technology
• /
• v.20 no.4
• /
• pp.375-382
• /
• 2014

This work investigated the plasma-catalytic decomposition of isopropyl alcohol (IPA) and the behavior of the byproduct compounds over monolith-supported metal oxide catalysts. Iron oxide ($Fe_2O_3$) or copper oxide (CuO) was loaded on a monolithic porous ${\alpha}-Al_2O_3$ support, which was placed inside the coaxial electrodes of plasma reactor. The IPA decomposition efficiency itself hardly depended on the presence and type of metal oxides because the rate of plasma-induced decomposition was so fast, but the behavior of byproduct formation was largely affected by them. The concentrations of the unwanted byproducts, including acetone, formaldehyde, acetaldehyde, methane, carbon monoxide, etc., were in order of $Fe_2O_3/{\alpha}-Al_2O_3$ < $CuO/{\alpha}-Al_2O_3$ < ${\alpha}-Al_2O_3$ from low to high. Under the condition (flow rate: $1L\;min^{-1}$; IPA concentration: 5,000 ppm; $O_2$ content: 10%; discharge power: 47 W), the selectivity towards $CO_2$ was about 40, 80 and 95% for ${\alpha}-Al_2O_3$, $CuO/{\alpha}-Al_2O_3$ and $Fe_2O_3/{\alpha}-Al_2O_3$, respectively, indicating that $Fe_2O_3/{\alpha}-Al_2O_3$ is the most effective for plasma-catalytic oxidation of IPA. Unlike plasma-alone processes in which tar-like products formed from volatile organic compounds are deposited, the present plasma-catalyst hybrid system did not exhibit such a phenomenon, thus retaining the original catalytic activity.