• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.973-976
• /
• 2011

In this paper, the conjugated heat transfer anslysis was performed about an electric heater used in a combustion test equipment of a combustor engine to figure out a physical phenomenon that heater coil was periodically cut during heating test. The result of analysis is that the temperature of coil at coil inlet region was increased locally because the velocity of air was slow in that region. The coil of heater was moved to 25mm downstream so that the structure stability of coil was assured by the decrease of the coil temperature due to increase of an air velocity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.49-56
• /
• 2007

The existing Double T-Beams have been positively constructed in America and Europe due to their elegant appearance and simple section shapes. However, there are some problems; thery are relatively weak in the structural resistance, and need to use somewhat limited and complicated construction methods. In this paper, new composite beams made of concrete and steel are proposed, by taking adventage of their merits in an effort to solve thess controversial problems. In addition, feasibility is presented in developing composite Double T-Beams by introducing pre-stressing forces as well to enhance structural safety.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.533-543
• /
• 2000

Deformation behavior and stability of vertical pipeline subjected to underground excavation have been studied by means of numerical analysis. Vortical ground displacements cause the pipe to be compressed, while horizontal ones cause it to be bent. In that region the vertical pipeline meets with the induced compressive stress and bending stress. In addition horizontal rock stress subjected to underground excavation may press the tube in its radial direction and it finally produces the tangential stress of pipe. In this study active gas well system is considered as an example of vertical pipelines. Factor analysis has been conducted which has great influence on the pipeline behavior. Three case studies are investigated which have the different pillar widths and gas well locations in pillar. For example, where overburden depth is 237.5 m and thickness of coal seam is 2.5 m, chain pillar of 45.8 m width in the 3-entry longwall system is proved to maintain safely the outer casing of gas welt which is made of API-55 steel, 10$\frac{3}{4}$ in. diameter and 0.4 in. thickness. Finally an active gas well which was broken by longwall mining is analyzed, where the induced shear stress turn out to exceed the allowable stress of steel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.239-239
• /
• 2011

최근에 감지막의 pH 감지특성을 평가하기 위해 electrolyte insulator semiconductor (EIS) 구조가 유용하게 이용되고 있다. EIS는 CMOS공정과 호환이 가능하고 구조가 간단하며 pH 변화에 반응속도가 빠르다는 장점을 가지고 있다. EIS 구조를 갖는 pH 센서의 동작 메커니즘은 pH 용액의 수소이온이 감지막의 표면에서 표면전위를 변화시키는 것에 기인한다. pH 감지막으로는 높은 유전율과 안정성이 뛰어난 high-k 물질이 많이 연구되고 있다. 그 중 high-k 물질인 ZrO2은 낮은 열전도도, 산성에서 알칼리성 영역까지의 넓은 화학안정성을 가지며 낮은 열 팽창성, 높은 유전상수 등 우수한 특성을 가지고 있다. 본 실험은 SiO2/ZrO2를 적층한 EIS 소자를 제작하여 열처리에 따른 전기적 특성과 pH 감지 특성을 평가해 보았다. EIS 적층막으로 사용된 SiO2는 실리콘과 high-k 감지막 사이의 계면상태를 양호하게 유지시키기 위한 완충막으로 성장되었다. 후속열처리는 rapid thermal annealing (RTA) 시스템을 이용하여 750$^{\circ}C$, 850$^{\circ}C$, 950$^{\circ}C$로 H2/N2 분위기에서 30초 동안 실시하였다. RTA 열처리 온도가 증가할수록 높은 pH 감지특성이 보였으며 hysteresis 현상과 drift 효과와 같은 non ideal 효과에 강한 immunity가 있는 것을 확인하였다. 결론적으로 SiO2/ZrO2 적층구조를 갖는 EIS는 RTA 950$^{\circ}C$ 열처리를 실시하였을 때 우수한 EIS pH 센서를 제작할 수 있을 것으로 기대된다.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.45-56
• /
• 2014

Frozen ground in cold region consists of an upper active layer and lower permafrost which is permanently frozen land. During the summer season, the air temperature is high enough to make the frozen ground melt, which causes the reduction of soil strength and thaw settlement. These phenomena result in structural instability, so it is necessary to apply frozen ground stability techniques. Thermosyphon is a closed natural two-phase convection device to maintain the ground temperature below $0^{\circ}C$ by extracting heat from the ground and discharges it into the atmosphere. Experimental and numerical investigation has been performed to estimate the effect of the refrigerant filling ratio in thermosyphon using R-134a refrigerant and the thermal conductance of the thermosyphon.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.75-85
• /
• 2023

In areas where excavation works are carried out, it is very important to select a retaining wall method to minimize ground water level and ground subsidence changes. In this regard, the use of Secant Pile Wall(SPW) method, which can complement the disadvantages of the CIP method, is gradually domestic increasing for the construction of retaining wall method. This study investigated the design elements of the SPW method and the interrelationship between the structural stability factors of the wall. The design elements for the retaining method are the overlap length between piles, pile diameter, and the specifications of the H-Beam specifications, while the structural stability factors of the wall are the bending stress, shear stress, horizontal displacement, and concrete strength. The study results showed that the pile diameter and H-Beam specifications have a significant impact on the capacity of the H-Beam, the overlap length and pile diameter have a significant impact on the horizontal displacement, and the pile diameter and H-Beam specifications have a significant impact on the required strength of the concrete.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.604-610
• /
• 2023

The nitrogen reduction reaction (NRR), which produces NH₃ by reducing N₂ under ambient conditions, is attracting attention as a promising technology that can reduce energy consumption in industrial processes. We investigated the adsorption behaviors at various active sites on the Ni (100) surface, which is widely used among catalytic metal surfaces capable of adsorbing and activating N₂, based on density-functional theory calculations. We also investigated two N₂ adsorption structures, so-called end-on and side-on structures. We find that for the end-on case, N₂ is adsorbed on a top site, and the reaction proceeded in a distal pathway, while for the side-on case, N₂ is adsorbed on a bridge site, and the reaction proceeded with enzymatic pathway. Finally, this study provides insight into the adsorption of metal catalyst surfaces for the NRR reactions based on the calculated Gibbs free energy profiles of the thermodynamically most favorable pathways.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.558-566
• /
• 2017

In this study, we developed an electron-emission OH radical generator for waste water treatment. The stability of the circuitry was ensured by implementing stable pulse waves with a MOSFET and reducing the momentary current rise. The OH radical generator uses a high-voltage and low-current discharger. The performance of the device was evaluated experimentally, which showed that it is possible to produce a stable and uniform pulse waveform for the drain current of the power MOSFET, which is connected to the input side of an AC multiplying converter through negative feedback circuitry with CR-snubber architecture. It was also possible to reduce the excitation current of the converter and improve the stability of the oscillation circuit. In addition, the generator can generate hydroxyl radicals stably. The bactericidal activities were also evaluated, and the germicidal power for E. coli, S. aureus, and S. flexneriwas improved by 99.9% or more after 60 minutes.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.542-549
• /
• 2022

Purpose: Pipes are widely used as applied devices in many industrial fields such as machinery, electronics, electricity, and plants, and are also widely used in safety-related fields such as firefighting and chemistry. With the diversification of products, the importance of technology in the piping field is also increasing. In particular, when changing the existing copper pipe to stainless steel, it is necessary to evaluate safety and flow characteristics through structural analysis or flow analysis. Method: This study investigated the structural stability of the 6.35 and 15.88 socket models, which are integrated insert type connectors developed by a company, using FEM. For structural analysis, HyperMesh as pre-processor, HYPER VIEW as post-processor, and LS-DYNA as solver were used. Result: In the case of 6.35 socket, the maximum stresses at hook, holder and hinge were 95.02MPa, 19.59MPa and 44.01MPa, respectively, and in case of 15.88 socket, it was 127.7 MPa, 40.09MPa and 45.23MPa, respectively. Conclusion: Comparing the stress distribution of the two socket models, the stress in the 15.88 socket, which has a relatively large outer diameter, appears to be large overall, but it is significantly lower than the yield stress of each material, indicating that there is no problem in structural safety in both models.

• 전기의세계
• /
• v.34 no.5
• /
• pp.272-280
• /
• 1985

전력계통의 목표를 달성하기 위한 기본적인 요청은 시시각각으로 변동되는 전력부하를 확실하게 예측하는 일부터 시작된다. 그런데 전력부하는 온도, 습도, 광도 등 예측일의 기상요인은 물론 산업구조, 경기변동의 사회적인 요인에 의해 변화된다. 또한 온라인 예측시는 자동급전시스템의 여건이나 예측주기에 따라 각각 고려해야 할 사항이 다양하므로 정확도가 높으면서도 안정된 결정적인 예측기법을 찾기가 어렵다. 그러나 주어진 계통과 이용할 수 있는 여건을 바탕으로 했을때의 허용정도 및 자동화등 실제 적용면에서 보다 나은 예측기법은 생각될 수 있다. 필자들은 우리나라 계통을 대상으로 자동급전시스템(AGC/SCADA system)에 의해 온라인 리얼타임으로 취득해온 부하데이터를 이용하여 자유자재 (interactive)기능을 내포한 단기 부하예측 팩키지를 개발한 바 있으며 이에 소개하는 바이다.