• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.414-418
• /
• 2006

유비쿼터스 컴퓨팅의 인프라가 되는 센서 네트워크는 매우 작은 하드웨어로 이루어지는 많은 수의 센서 노드들로 구성된다. 이 네트워크의 토폴로지와 라우팅 방식은 그 목적에 따라 결정되어야 하며, 하드웨어 및 소프트웨어도 필요한 경우에는 변경되어야 한다. 따라서 그러한 네트워크를 최적으로 설계하기 위해서는 시스템 동작을 확인하고 성능을 예측할 수 있는 센서 네트워크 시뮬레이터가 필요하다. 현존하는 몇몇 센서 네트워크 시뮬레이터들은 특정 하드웨어나 운영체제에 맞추어 개발되었기 때문에, 그러한 특정 시스템들을 위해서만 사용될 수 있다. 그리고 시스템 설계 상의 주요 이슈가 되는 전력 소모량 및 프로그램 실행 시간을 추정하기 위한 어떤 수단도 지원하지 못하고 있다. 이 연구에서는 기존의 센서 네트워크 시뮬레이터들이 갖고 있는 문제점을 해결한 시뮬레이터를 개발하고, 센서 네트워크의 계층적 라우팅 프로토콜인 LEACH, TEEN, APTEEN의 전력소모량을 시뮬레이션을 이용하여 분석하였다. 시뮬레이션의 작업부하인 명령어 트레이스로는 ATmega128L 마이크로컨트롤러용 크로스컴파일러에 의해 생성된 실행 이미지를 사용하였다. 따라서 각각의 라우팅 프로토콜을 실제 센서 보드에서 동작하는 응용 프로그램으로 구현하고, 컴파일된 실행 이미지를 작업부하로 사용하여 시뮬레이션 하였다. 라우팅 프로그램들은 ETRI의 센서 네트워크 운영체제인 Nano-Q+ 1.6.1을 기반으로 구현되었으며, 하드웨어 플랫폼은 옥타컴의 센서 보드인 Nano-24이다. 시뮬레이션 결과에 따르면, 센서 네트워크는 그 사용 목적에 따라 라우팅 프로토콜을 적절히 선택해야 한다는 것을 알 수 있다. 즉, LEACH는 주기적으로 네트워크의 상황을 체크해야 하는 경우에 적합하고, TEEN은 환경의 변화를 수시로 감지해야 하는 경우에 적합하다. 그리고 APTEEN은 전력소모량과 기능 측면을 모두 고려할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된다.리를 정량화 하였다. 특히 선조체에서의 도파민 유리에 의한 수용체 결합능의 감소는 흡연에 의한 혈중 니코틴의 축적 농도와 양의 상관관계를 보였다(rho=0.9, p=0.04). 결론: $[^{11}C]raclopride$ PET을 이용하여 비흡연 정상인에서 흡연에 의한 도파민 유리를 영상화 및 정량화 하였고, 흡연에 의한 선조체내 도파민 유리는 흡연시 흡수된

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.613-618
• /
• 2019

The flow-induced vibration in a heat exchanger may cause the damage to piping. Therefore, it is necessary to establish the flow induced vibration characteristics for the structural stability of a heat exchanger. The purpose of this study was to compare the generation, development, and separation characteristics of a vortex around a circular tube with respect to time when the flow velocity of the inlet was fluctuating constantly and periodically. The time characteristics of lift and drag and the PSD characteristics were also investigated. In the case of a constant inlet flow velocity, the well-known Kalman vorticity distribution was shown. The vortex generation, growth, and separation were also observed alternately at the upper and lower sides of the tube. In the case of periodic inlet flow velocity, the vortex occurred simultaneously in the upper and lower sides of the tube. In the case of constant inlet flow velocity, the magnitude of the lift PSD was 500 times larger than that of drag. The frequency was 31.15 Hz and that of drag was doubled at 62.3 Hz. In case of a periodic inlet flow velocity, the PSD of the drag was approximately 500 times larger than that of lift. The frequency was 15.57 Hz, which was the same as the inlet-flow velocity frequency. In addition, the frequency of lift was 31.15 Hz, which was the same Karman vortex frequency.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.107-115
• /
• 2021

This study empirically analyzed the effect of SME representative competency on account receivable management and management performance using questionnaire data. The research model was confirmed through EFA, reliability analysis, CFA, and model fit, and the hypothesis was verified with a SEM. As a result, representative's manager competency had a positive(+) effect on account receivable management, and entrepreneurial competency had a negative(-) effect on credit control management. Account receivable management had a positive(+) effect on management performance. In the mediating test, credit sales management had a positive(+) effect but credit control management had a negative(-) effect on the effect between entrepreneurial competence and business performance. The result suggests that representative competency is an important factor and it is necessary to cultivate management competencies such as finance, utilization of management resources, and account receivables knowledge to improve management performance, and to manage account receivable based on insurance and customer credit for stable account receivable management. In the future, research on the impact of external factor such as consulting and government support and the account receivable management is required.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.203-214
• /
• 2021

Assessment of benthic quality status was implemented along the subtidal areas of Jindo and Jejudo to understand faunal structure of polychaete assemblages and ecological quality of the benthic environment. Sediment analysis was characterized by well sorted of both mud and sand in Jindo, and a little higher sand in Jejudo instead. A total of 68 polychaete species were found at 14 sampling stations with a mean density of 231 inds./m², and 61 species, 167 inds./m² and 62 species, 295 inds./m² in Jindo areas and Jejudo areas. Dominant species found in Jindo areas were Heteromastus filiformis, Ampharete arctica, Prionospio sp., Sigambra tentaculata, Thelepus sp. and Amphicteis gunneri, Ampharete arctica, Prionospio sp., Spiochaetopterus costarum, Heteromastus filiformis in Jejudo. With a help of cluster analysis, it was found that the sampling stations showed distinctive pattern of the distribution pattern and benthic quality status in Jindo and Jejudo except sampling station numbers 5 and 6, respectively. AMBI analysis the results were 1.2-3.4, grade V benthic polychaetes did not appear. It was evident that both Jindo and Jejudo had different sedimentary characteristics as well as distribution pattern of polychaete assemblages.

• Journal of Korea Foundry Society
• /
• v.42 no.2
• /
• pp.83-93
• /
• 2022

Throughout this research course, we have analyzed the financial situation of more than 2,700 companies using credit evaluation disclosures from 2017 to 2019. The population was gathered based on the certification of Ppuri companies and Ppuri Expertise companies through the Korea National Ppuri Industry Center, accompanied by the NICE credit evaluation index. For the first time in Korea, we wanted to look at growth, profitability, and stability through financial analysis of the Ppuri industry. Through an indepth analysis, we identified operating income (rate), net income (rate), asset size, and debt ratio, along with three years of Ppuri company workers and total sales fluctuations, and looked at the financial structure per capita. In addition, financial status per person was compared by dividing Ppuri companies into six groups by employee size. Groups were 10 or fewer people, 11 to 20 people, 21 to 50 people, 51 to 200 people, 201-300 people, and 300 or more people; single individual companies were excluded for research convenience. Overall, the financial situation of Ppuri companies was judged to be in a very bad downturn, and financial indicators deteriorated over the course of the three years of investigation. In particular, the smaller the number of employees, the greater the financial fluctuations were and the worse the situations were. Among Ppuri companies, the casting industry, which is the technical starting point for the value chain of the industry, was found to also be in a very bad state, with continued workforce declines, total assets and sales reductions at severe levels, and operating income (rate) and net income (rate) also very poor. This is why we need a suitable and feasible policy direction, something that is difficult but must be allowed to develop.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.368-368
• /
• 2020

최근 초대형화 되어 나타나고 있는 이상홍수와 지진 등에 의한 저수지 붕괴와 같은 대규모 비상상황 발생으로 하류지역 주민의 생명과 재산의 피해가 발생하고 있다. 국내의 경우 1996년 이후로 지속적으로 발생하고 있는 이상홍수로 인해 1998년에는 40개,1999년에는 5개의 소규모 저수지가 붕괴되었으며 최근 2013년과 2014년에도 저수지가 붕괴되는 상황이 발생했다. 댐붕괴의 원인은 구조물의 자연적 노화, 극심한 강우나 홍수, 지진, 제체전도, 파이핑, 침윤발생, 월류 및 파랑 등에 의한 자연적 상황 등이 요인이 될 수 있으며, 시공결함, 사고 또는 전쟁과 같은 인위적인 요인으로 발생할 수도 있다. 과거에 설계 및 시공기술이 부족하였거나 경제적인 이유로 부실하게 건설되어 있는 댐이 세계적으로 산재되어 있어 잠재적인 위험을 상당수 내재하고 있는 실정이다. 본연구는 댐의 점진적인 파괴에 의해 발생하는 유출수문곡선을 구하고 파괴의 성질을 예측 및 홍수파를 수리학적으로 추적하기위해 BREACH 모형과 DAMBRK 모형을 사용했으며 극한홍수(PMF)조건과와 최대지진발생(MCE)조건을 적용하여 원주시 관내 저수지 붕괴 모의 시나리오를 구축했다. 저수지 붕괴에 따른 유출수문곡선을 유도하기 위해서 본 연구에서는 기존의 EAP보고서 자료를 참고하여 붕괴지속시간, 붕괴부 평균폭, 붕괴부 측벽면 경사의 변화에 따라 다양한 모의를 수행함으로써 발생되는 붕괴부 유량 수문곡선을 도출하여 각각의 조건들이 붕괴파 형성에 미치는 영향에 대한 분석을 실시하였다. 그 결과 저수지의 붕괴시 첨두유출량에 민감한 영향을 주는 인자는 붕괴지속시간과, 붕괴부 평균폭으로서 이들 값이 붕괴유출량 변화에 많은 영향을 주는 것으로 나타났다. 최대지진발생(MCE)조건 해석결과 홍수류의 범람으로 인해 홍수파가 하류측으로 진행할수록 완만히 감소하며, 하천 중·상류부 인근 제내지로 홍수류의 범람이 발생하는 것으로 검토되었으며, 극한홍수(PMF)조건 해석결과 최대지진발생(MCE)조건과 같이 홍수파가 하류측으로 진행할수록 완만히 감소하는 특성을 보이며, 하천 전체 구간에서 인근제내지로 홍수류의 범람이 발생하는 것으로 검토되었다. 본 연구는 침수구역 피해규모 산정 및 비상대처계획도를 작성시 기초데이터가 되어 상황별 피해예상지역에 대해 응급행동요령, 주민대피계획비상대처계획을 수립하여 지역 주민생활에 안정을 기여하고자 한다.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2023

Ceramic membranes are generally used for various industrial processes operating under extreme conditions because of its high thermal and chemical stability. However, due to the trade-off phenomenon of permeability and mechanical strength, preparation of high permeability-high strength membrane is necessary. In this study, the change in characteristics and performances of ceramic membranes was analyzed depending on the type of polymer binder and its mixing ratio. Because the solubility between solvent and polymer binder was higher in PSf (polysulfone) than in PES (polyethersulfone), the viscosity and discharge pressure of the PSf-based dope solution were higher than those of PES-based dope solution. When PSf was used as a polymer binder, ceramic membrane showed high mechanical strength and low water permeability due to the dense structure. On the other hand, in case of PES, the mechanical strength was slightly reduced and the water permeability was increased. It was confirmed that the optimum mixing ratio of the PSf and PES with high water permeability and mechanical strength was 9:1.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.140-145
• /
• 2024

Removable partial denture wearers are exposed to the risks that remaining teeth get damaged by caries, attritions, erosion, and fracture. In the case of damaged abutment tooth which should fit to Removable partial denture (RPD), the fabrication of surveyed crown is followed by the making of RPD. However, making new denture takes a long time, and needs several processes and costs. Also, patients should get used to new denture. If other abutment teeth and edentulous ridges provide the existing denture with support, retention, and stability, use of existing denture is considered clinically acceptable. In this situation, fabricating retrofit crowns to an existing removable partial denture makes patient use existing denture, cuts costs, and reduces discomfort. In this case, severely worn teeth were restored using monolithic zirconia crown which fit to an existing removable partial denture by CAD-CAM. Moreover, support, retention, and stability of the denture were improved, and both doctor and patient were satisfied with the result.

• Journal of Wetlands Research
• /
• v.26 no.2
• /
• pp.139-146
• /
• 2024

Various injection materials, such as asphalt-based injection materials, urethane-based injection materials, cement- based injection materials, and acrylic-based injection materials, are used for the repair of aged conduits and underground structures with cracks. In this study, research was conducted on an environmentally friendly acrylic- based leak repair material that exhibits good curing properties even in humid conditions and stability in temperature fluctuations. To compare the performance of the improved acrylic leak repair material with the existing acrylate injection material, experiments were conducted using KS standard methods, including underwater length change rate tests, underwater leakage resistance tests, and chemical performance tests. The comparative experiments revealed that the improved acrylic leak repair material showed no changes in shrinkage due to humidity, temperature variations, or chemical reactions compared to the existing acrylate injection material. In the underwater resistance test, the improved acrylic leak repair material did not show any leakage. Additionally, to assess the environmental impact of the improved acrylic leak repair material, acute fish toxicity tests and acute oral toxicity tests were conducted, and the results showed no mortality and no specific concerns with the test specimens. The experimental results led to the conclusion that the improved acrylic leak repair material is considered to be superior in performance, environmentally safe, and harmless to the human body. Based on various experimental results, it is inferred that the improved acrylic leak repair material is suitable for use as a repair material for cracks in manholes and underground structures compared to the existing acrylate repair material. This study aims to propose valuable data for future technological development by evaluating the applicability of acrylic leak repair materials.