• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.338-344
• /
• 2022

It is necessarily required in developing Si-based anode materials for lithium ion batteries, and the related researches are actively working especially in Si-carbon composite material. On the other hand, the photovoltaic and semiconductor industries discard huge amount of Si resources, facing the environmental issue. In this study, recycled Si resource is adopted to obtain Si-carbon composite for LIB(Lithium-Ion Batteries). In order to improve high-capacity retention characteristics and cycle stability of a Si anode material for the LIB, two differenct composites having a mass ratio of silicon and pitch of 1:1 and 2:1 are synthesized and electrochemical characteristics of the anode material manufactured by simple self-assembly method. This result in excellent initial capacity with stable cycle life, and confirming the potential use of recycled Si material for LIB.

• Journal of Fisheries and Marine Sciences Education
• /
• v.7 no.1
• /
• pp.14-30
• /
• 1995

한국(韓國)의 연근해어업(沿近海漁業)은 국내외 여건의 변화로 경쟁력(競爭力)을 잃어가고 있다. 따라서 구조개선(構造改善)을 통한 활로개척의 필요성이 강하게 대두되고 있으나, 중앙정부(中央政府) 차원의 어업여건(漁業與件) 개선은 장기간이 소요될 것으로 예상된다. 따라서 지방화시대(地方化時代)를 맞이하여 수산정책(水産政策)도 지방정책(地方政策)에 의한 지역적 특성을 가진 정책으로 발전시켜나갈 필요가 있다. 여기에서는 그런 차원에서 본토(本土)와는 지리적(地理的), 사회적(社會的), 경제적(經濟的)으로 상당히 독립된 특성을 가지고 있는 제주도(濟州道)에 있어서의 연근해어업(沿近海漁業)에 관한 각종 자료를 이용하여 어업의 현황을 분석하고, 나아가 생산성(生産性)을 보다 향상시킬 수 있는 어업구조(漁業構造)의 개선방향(改善方向)에 관하여 연구하였다. 그 연구결과(硏究結果)는 다음과 같다. 1. 제주도(濟州道) 연근해어업(沿近海漁業)의 실태(實態) 1) 어업인구(漁業人口)는 계속 감소하고 있으며 부녀자(婦女子) 비율이 뚜렷하게 높다. 2) 어선세력(漁船勢力)은 10톤이하의 소형선(小型船)이 꾸준히 증가되고 있으며, 10~50톤급의 증가률(增加率)도 매우 높다. 3) 어항(漁港)은 107개가 있으나 그중 80%는 비법정(非法定)의 소규모(小規模) 어항(漁港)이었다. 4) 어선어업(漁船漁業)은 연승(延繩) 유자망(流刺網) 채낚기 분기초망어업(焚寄抄網漁業) 등을 중심으로 이루어지고 있다. 5) 생산물(生産物)의 종류는 어류(魚類)가 주축을 이루고 있고, 대부분 고급(高級) 어종(魚種)이며, 가격은 상당히 높다. 6) 어선어업(漁船漁業)의 한어기(閑漁期)에 관광산업(觀光産業)과 연계하여 운영하고 있는 유어어업(遊漁漁業)은 상당히 발전할 소지를 가지 고 있다. 2. 문제점(問題點) 1) 어업인구(漁業人口)는 감소하는 반면 부녀자(婦女子)의 참여율은 높아 어선어업(漁船漁業)에 종사할 인력의 수급이 어려우며, 이것이 조업규모(操業規模)를 지속적으로 확대하지 못하는 요인이 되고 있다. 2) 어항시설(漁港施設)이 미비하여 어선어업(漁船漁業)의 규모를 확대시키기가 곤란하다. 3) 연근해어업(沿近海漁業) 어획물(漁獲物)의 판매를 위한 제도 및 시설이 소비환경(消費環境) 및 기호변화(嗜好變化)에 적절히 대응하지 못하고 있다. 4) 유어어선(遊漁漁船)의 운영기반(運營基盤)이 취약하여 활성화되지 못하고 있다. 5) 어업의 경쟁력 확보를 위한 기술교육(技術敎育) 및 연구(硏究) 지도체제(指導體制)가 취약하다. 3. 구조개선(構造改善)의 방향(方向) 1) 어업인력(漁業人力)의 안정적인 수급(需給)을 위하여 어민(漁民)의 정주환경(定住環境)을 개선하고, 어민후계자(漁民後繼者) 육성사업(育成事業)의 자금지원 수준을 향상시켜야 하며, 수산고등학교(水産高等學校) 졸업자(卒業者)를 수산계대학(水産系大學)에 일정 비율 정원외(定員外) 특예입학(特例入學) 시킴으로써 기술(技術)의 고도화(高度化)와 어촌 정착 동기를 높여 주어야 한다. 2) 어업인력(漁業人力) 감소에 대비하여 어선의 장비를 현대화, 생력화(省力化)하여 적은 인력으로도 운영이 가능하도록 유도하여야 한다. 3) 어업의 경쟁력 확보를 위해 어항시설(漁港施設)을 확충하고, 소비자(消費者)의 기호변화(嗜好變化)에 대응하여 위탁판매(委託販賣) 장소를 중심으로 종합어시장(綜合魚市場)을 개설해야 하며, 이와는 별도로 활어위판장(活魚委販場)을 시설하여 어획물(漁獲物) 부가가치제고(附加價値提高) 및 유통개선(流通改善)을 이루어야 할 것이다. 4) 유어어선(遊漁漁船)의 운영도 편의시설(便宜施設)을 확충하고 인공어장(人工漁場)의 조성을 추진하여 안정적인 부업으로 정착될 수 있도록 하는 노력이 필요하다. 5) 연구(硏究) 지도(指導)의 강화를 위하여 제주도(濟州道)에 소재하고 있는 연구(硏究) 지도기관(指導機關)을 적극적으로 활용함은 물론, 필요하다면 기관을 개편 증설하고, 어업인력(漁業人力)의 질적 향상을 위한 어민교육원(漁民敎育院)의 설립도 검토해 볼 필요가 있다.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.549-556
• /
• 2009

This research analyzed the structural efficiency and application by improving the 100 mm width vertical joint to 150 mm and developing three connection methods to reduce the difficulty in assembling and handling PC walls. Moreover, nonlinear finite analysis was used for analyzing. From the analysis results, when double width connection was applied, the PC wall showed larger load capacity and ductility due to the steel bar sharing loads efficiently. Moreover, as the dimension of loops and the number of bars increased, the maximum load capacity increased as well. Also, among the double width connections, the largest capacity showed in the order of welding, ring and C type loop. However, in case of welding type loop connection, the ring type loop is more stable due to changes in different site conditions. Therefore, thorough quality control of welding is necessary.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.135-144
• /
• 2016

It is essential to lighten the weight of switch girders in order to reduce their costs of manufacturing and make it easier to use them in construction. Lightening the weight of switch is also important to the Maglev 3-way switches system, however, the design variables should be considered very carefully if lightening is to be applied to the system, because these variables are vitally related to the levitation stability. Because Urban Maglev trains have a structure in which train bogie wraps around the guiderail, the adjustment of a girder's height is a possible way to reduce the weight. The safety of the application of this concept is ensured by repeated experiments in a test bed, however, due to a lack of space and budget limits, the design parametric study for the system model can substitute for actual application. The purpose of this paper is to study the design parameters that are concerned with levitation stability while a Maglev train is running on the Maglev 3-way system depending on the weight of the switch girders. In this study, switch girder weight is reduced by adjustment of girder height and girders are and modeled as a flexible body. The effect of the adjustment of girder height on the levitation stability can be analyzed by comparing the velocity of the train when it passes the switch girders, with the lateral gap, and the levitation gap which are obtained from the co-simulation of the Maglev train's dynamics model and flexible switching system. The results of this research will be used to design a Maglev switch.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.632-638
• /
• 2013

This paper describes on the flame stability and combustion instability of coal derived synthetic gas especially for gases of Buggenum IGCC in Netherlands and Taean IGCC in Korea. These combustion characteristics were observed by conducting ambient-pressure elevated-temperature combustion tests in GE7EA model combustor when varying heat input and nitrogen dilution ratio. Flame stability map is plotted according to the flame structure by dividing all regimes into six, and only regime I and II are identified to be stable. Both syngases of Taean and Buggenum with nitrogen integration corresponds to regime II in which syngas burnt stably and flame coupled with outer recirculation flow. Stable regime of Buggenum is larger than that of Taean when considering only $H_2$/CO ratio due to higher content of hydrogen. However, when considering nitrogen dilution, syngas of Taean is burnt more stably than that of Buggenum since more nitrogen in Buggenum has negative effect on the stability of flame.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.169-193
• /
• 2014

This paper attempts to analyze how the psychological factors would have an effect on the user's intention to make use of the mobile care via smart-phone, identifying the relationships among individual motivation propensity that consists of prevention propensity and promotion propensity, perceived usefulness and ease of use, perceived cost, behavioral use attitude and use intention based on technology acceptance model, and verifying them empirically through the structural equation modeling. The findings are as the followings. First, prevention motivation propensity affects positively on usefulness of smart-phone for mobile care service, but there are no significant indications that it affects on the ease of use and perceived cost. Second, promotion propensity affects positively on perceived ease of use and perceived cost of smart-phone for mobile care service, but there is no significant indication that it affects on perceived usefulness. Third, perceived usefulness and ease of use, and perceived cost affects positively on the use attitude. In sum, this paper confirms that the prevention propensity and promotion propensity might be used as antecedent variables for developing new smart-phone services of mobile care.

• Korean small business review
• /
• v.41 no.4
• /
• pp.87-110
• /
• 2019

The structural and sustainable implementation of the microfinance policy is required to be successful. To this end, the government should focus on availability and accessibility of the public microfinance, away from providing the beneficial financing (financial benefits)featured by the combination of the welfare and finance in the past. In addition, the government-sponsored microfinance needs to aim for performance-oriented evaluation that leads to stabilization of financial life of ordinary people or increase of income, moving away from conventional funding based on the scale and the quantity for the poor. It is necessary to implement the following policies in order for the Moon's administration to take the government-sponsored microfinance to the next level. The government-sponsored microfinance must be in the market failure domain, but nonetheless, it is required to be managed by structural and sustainable ways so that it complies with the market principles and does not crowd out the private microfinance. Last but not least, making the best use of the capital market function can be a way to fund social enterprises or social economy enterprises. This aims to enable catalyst capital in the capital market to play a prime role for the inflow of private capital for the purpose of creating the social value.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.5
• /
• pp.403-410
• /
• 2000

This study was carried out to understand the effect of addition of potato search on the frozen dough. The characteristics of frozen dough were measured by the farinogram, the extensogram and the amylogram. The results of these measurements show that the dough added with starch has higher stability than the control. The physical and chemical change of the dough were measured in accordance with the period of the frozen storage. The dough added with starch showed smaller physical and chemical change than control, which means that the starch prevents the frozen dough from the deterioration during the frozen storage. It is supposed from this result that the starch protects the activity of yeast and the structure of gluten matrices from frozen damage. It is understood from this study that addition of potato starch into frozen dough improve the stability of the frozen dough.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.69-71
• /
• 2007

최근 들어 전력 계통은 점차 복잡해지고 계통의 규모 역시 빠른 속도로 성장하고 있다. 한국전력거래소는 전력계통의 안정적, 경제적 운영을 담당하고 있는 기관으로 '01년 현재의 에너지관리시스템(EMS)를 도입하여 실시간 전력계통에 대한 정확한 판단을 기반으로 전력계통의 안정성과 경제성 확보에 주력하고 있다. EMS의 대표적인 기능은 계통데이터의 수집(SCADA), 자동발전제어(AGC), 계통해석(NA) 등으로 대별되며, 이중 계통해석 기능은 프로그램 규모면에서 가장 큰 부분을 차지하고 있다. 계통해석 기능은 또다시 상태추정(SE), 상정사고분석(CA), 안전도해석(SENH), 고장해석(SCT) 등의 프로그램으로 구성되어 다양한 실시간 계통해석을 수행하게 된다. 전력계통 해석은 먼저 대상계통을 수학적 모델로 정식화하기 전에 계통망의 기하학적 구조를 기술하는 단계가 필요한데 이를 토폴로지 처리라고 하며, 보통 그래프이론인 노트(Node)와 마디(Branch)를 사용하여 전력계통망을 구성하는 요소들의 연결관계를 정의하게 된다. 본고는 이론적 수준을 넘어 EMS의 계통해석 기능에서 실계통을 해석하기 위해 쓰이고 있는 토폴로지 처리의 기본 알고리즘을 분석하여 국내 전력산업 기술 선진화에 기여하고자 한다.