• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.441-450
• /
• 2006

WiBro(Portable Internet Service) is service being capable to provide a high data rate wireless internet access with Personal Subscriber Station under the stationary or mobile environment, anytime and any where. It will fill the gap between very high data rate wireless local area networks and very high mobility cellular systems. The security is an important point of WiBro providing high data and mobile wireless services. This paper proposes user authentication mechanism of WiBro wireless networks applied EAP-AKA authentication protocol. As a result of Wireless authentication based on EAP-AKA, this mechanism is capable to be used in WiBro-WLAN-3GPP interworking scenario as well as the WiBro authentication mechanism.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.58-65
• /
• 2008

Most connections for the glulam structural members consisted of connector and fastener. The mechanical behaviour of the connection can be occurred by the dowel bearing resistance and wood shear by the fastener. This study aims at the examination of the shear properties for the small specimen with lamination components and for the full-sized pin connection and the moment resisting property for the double shear full-sized pin connection using structural column and beam members. Small specimens including glue line shows greater density and shear strength by the lamination effect than other specimens. It is needed that estimations of double shear property and moment resistance for the pin connections should be adjusted in some degree. For the better and safe estimation of moment resistance strength for the column-beam pin connection, however, the shear strength of small specimens should be deducted by 10%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.53.1-53.1
• /
• 2011

현재 태양전지시장에서 비중이 많은 실리콘 태양전지는 높은 효율에 비해 제조 단가가 비싸다는 단점을 가지고 있다. 이에 비해 칼코파라이트 구조의 $CuInSe_2$ (CIS)계 화합물은 직접 천이형 반도체로서 높은 광흡수 계수($1{\times}105cm-{\acute{e}1$)와 밴드갭 조절의 용이성 및 열적 안정성 등으로 인해 고효율 박막 태양전지용 광흡수층 재료로 많은 관심을 끌고 있다. CIS 계 물질에 속하는 Cu(InGa)$Se_2$ (CIGS) 태양전지의 경우 양산화에 sputtering방식사용하고 Showa Shell에서는 대면적 CIGS 모듈 효율 13.4%를 달성한 바 있다. 현재 CIGS는 열처리하는 방법으로 selenization 공정을 사용하는데 이 공정은 유독한 $H_2Se$ gas를 이용해야 한다는 점과 긴 시간 동안 열처리를 해야 하는 단점을 가지고 있다. 따라서 이러한 단점을 보완하기 위해 본 연구에서는 전자빔을 사용하여 후속 공정을 실시하였다. 전자빔을 사용할 경우 낮은 온도에서 precursor를 처리하며 짧은 시간에 공정이 끝난다는 장점이 있다. 본 연구에서는 sodalime glass위에 조성비(Cu 60.87% Se 38.66%)인 Cu_2Se$ target(4.002"${\times}0.123$") 을 DC sputter를 이용하여 DC power를 50W,100W를 주고 Working pressure를 20,15,10,5,3,1mtorr로 조절하여 증착하였다. 전자빔의 세기 조건을 3Kv, Rf power 200W, Ar 7sccm로 전자빔 조사 시간을 1,2,3,4,5min으로 늘려가며 최적화 실험 하였고 최적화된 조건으로 $Cu_2Se$ target에 조사 하였다. 박막의 특성평가는 전자빔 조사 전/후에 대해 XRD, SEM, XRF, Hall measurement, UV-VIS을 이용하여 분석평가를 하였다. 이 실험은 $Cu_2Se$상이 자라는 특성과 표면 상태에 따라 CIGS박막을 증착하였을 때 나타나는 효율 변화를 알아 보기위한 초기 공정 실험이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.13-18
• /
• 2016

Humidifiers are used to control indoor humidity. Element-type humidifiers have the advantages of simple structure and low energy consumption, and Japanese products have been widely used for the humidifying elements. In this study, a new humidifying element made of cellulose and PET was developed, and the performance was compared with that of a Japanese element. The mass transfer rates and pressure drops were measured for an element installed at the entrance of a suction-type wind tunnel. The humidification efficiency of the new element was 2 to 4% greater and the pressure drop was 23 to 32% smaller compared to the Japanese element. The mass transfer effectiveness ($j_m/f$) of the new element is also 5 to 28% higher. However, the water absorption capacity was smaller than that of the Japanese element, meaning further development is needed.

• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.51-57
• /
• 2008

The long-term behaviors of prestressed concrete cable-stayed bridges are considerably influenced by the time dependant material characteristics such as creep and shrinkage. This study investigated the influences of the change of relative humidity by application of the CEB-FIP model and ACI model, which are generally used in the prediction of long-term behavior of concrete structures. In case of the moment of girder, CEB-FIP model predicted a bigger effect of relative humidity change than the ACI model. Furthermore, the effect was significant. Also, the long-term behaviors between these models were different each other even under the same material condition. Therefore, the prediction of the long-term behavior should be compensated after comparative analysis with the results of material tests of each construction site and between the different models.

• Journal of Elementary Mathematics Education in Korea
• /
• v.23 no.3
• /
• pp.323-345
• /
• 2019

This study examines the introduction of fractions in the third grade mathematics textbooks focusing on stages of units coordination and suggests alternative activities to help students develop their understanding of fractions. As results, the sessions of introduction units in textbooks was well organized to allow students to construct more extensive fraction schemes (i.e., Part-whole fraction scheme → Partitive unit fraction scheme → Partitive fraction scheme). However, most of the activities in textbooks were related to stages 1 and 2 of units coordination. In particular, the operations and partitioning schemes (i.e., equi-partitioning and splitting schemes), which are key to the development of students' fraction knowledge, were not explicitly revealed. Fraction schemes also did not extend to the Iterative fraction scheme, which is central to the construction of improper fractions. Based on these results, this study is expected to provide implications for the introduction of fractions in textbooks focusing on stages of units coordination to teachers and textbook developers.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.433-439
• /
• 2009

With the help of fast growing popularization of internet, all areas of e-Health have expanded rapidly; such that people have become interested in digital personal health record and its management. This paper examined the characteristics of personal health record and made the analysis of the structure of Google Health, the internet-based personal health record system. Google Health allows you to store and manage all of your health information, import medical records from hospitals and pharmacies, share your health records, and explore online health services. This examples represents not only a significant change of current medical systems but also enables to estimate the future stream of it. As a result, this paper, in the areas of e-Health which will be expanded in various service areas, may give you a greater sense of importance of personal health record and will eventually provide more complemental structure of future personal health record through comparative studies on the strength and weakness of it.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.208-211
• /
• 2007

Separation Devices have two functions. These two functions are to bond and to separate two bodies. This paper is about separation devices which use explosives to separate their bodies. Explosive bolt is separated with two bodies when the explosives in the body detonated. The good things of explosive bolt are that it has simple operational system and it is made of few parts. But it has side effects; fragment and pyre-shock. To avoid these side effects gas expansion separation(GES) bolt and pressure cartridge actuation separation(PAS) devices are invented. These use pressure to separate their bodies. The pressure is generated when explosives are burned. But the sizes of PAS devices are bigger than explosive bolts. And GES bolt has a mechanically lower bonding ability than that of explosive bolt. When you design separation devices, it is recommended to know operational system and characteristics of separation devices, to design best one.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.534-539
• /
• 2013

The research about the Korean integrated wireless network for railways is in progress. The network integrates and complements the various railway functions. In addition, the network is trying to change from wire communication to radio communication. The activities for the railway frequency acquisition are also in progress for the implementation of the network. This paper analyzes the problems for the Korean railway communication networks. The problems revolve around the dispersed network structure, the limited functions, the different communication methods, the technology limitation for the communication methods, and the usage of the non-licensed band. Subsequently, we explain the current state and trend for the foreign communication of the railways. This paper suggests improvement plans for the problems and also explains the expected efficiency for the improvement plans.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.52-57
• /
• 2002

A simulation tool for an optimal ATIS design and drivers' dynamic route choice behavior analysis is developed, which is applicable to urban networks. Due to the difficulty to make drivers feel the time pressure according to traffic conditions, current SP questionnaire survey type surveys have a limitation to capture correct driver reactions to real-time traffic Information provision. The simulator Is a web-based upgraded version, named WATiSim (Web-based ATIS Simulator), to quickly perform a wide population survey with a minimal cost using INTERNET Furthermore, the time pressure issue is lessened by its interface and simulation modules. After WATiSim mimicked a VMS based ATIS in a partial network of Seoul Metropolitan, reactions of drivers to various traffic conditions were surveyed through INTERNET and analyzed using a logit model. Drivers under the ATIS environment clearly understood the provided traffic information, and their reactions were closely related to traffic conditions, scheduled delay, trip purposes as well as toll charge if any.