• Journal of the Korean Geographical Society
• /
• v.33 no.3
• /
• pp.447-454
• /
• 1998

As a widespread tephra erupted 24 to 25 KA, Aira-Tn Ash, or AT, provides an invaluable datum for stratigraphic study of late Pleistocene in Northeast Asia. AT can be identified from their tonal characteristic and morphology (the so­called bubble-wail feature), as well as typical refractive index. First reported in 1983, its presence was confirmed from many palaeolithic deposits distributed throughout Korea. It forces us to reconsider the age of prominent Pleistocene deposits. At the famous archaeological site of Chon-gok-ni, presence of AT lends a firm support that sedimentation and deposition of lithic assemblage were in fact a late Upper Pleistocene event, thus, throwing a new question at archaeologists to explain why such archaic-looking tools were continued to be made. Discovery of AT at Chongdongjin is more surprising, since the coastal terrace has been regarded by many as an early Lower Pleistocene eustatic feature. It implies strongly that we need to devise a new scheme for Quaternary stratigraphy. In the absence of reliable datum and marker for Quaternary research, efforts must be given to search for and identify AT and other widespread tephras.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.51-60
• /
• 2014

Load and Resistance Factor Design (LRFD) is one of the limit state design methods, and has been used worldwide, especially in North America. Also, the study for LRFD has been actively conducted in Korea. However, the data for LRFD in Korea were not sufficient, so resistance factors suggested by AASTTO have been used for the design in Korea. But the resistance factors suggested by AASHTO represent the characteristics of bedrocks defined in the US, therefore, it is necessary to determine the resistance factors for designs in Korea, which can reflect the characteristics of bedrocks in Korea. Also, the calculated probabilities of failure from conventional reliability analyses which commonly use log-normal distribution are not realistic because of the lower tail that can be extended to zero. Therefore, it is necessary to calibrate the resistance factors considering the lower-bound resistance. Thus, this study calculates the resistance factors using thirteen sets of drilled shaft load test results, and then calibrates the resistance factors considering the lower-bound resistance corresponding to a target reliability index of 3.0. As a result, resistance factors from conventional reliability analyses were determined in the range of 0.13-0.32 for the shaft resistance, and 0.19-0.29 for the base resistance, respectively. Also, the lower bounds of resistance were determined based on the Hoek-Brown failure criteria (2002) and GSI downgrading. Considering the lower-bound resistances, resistance factors increased by 0~8% for the shaft, and 0~13% for the base, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.21-29
• /
• 2016

In this study, recycled aggregates crushed from waste concrete were sorted into three groups, 10-13 mm, 13-20 mm, and 20-25 mm. They were treated in different ways and then their crushability was evaluated for each treatment. Coffee waste was used for reducing their pH level. The pH of recycled aggregate was almost 11, regardless of aggregate sizes. The pH of coffee waste was nearly 5 and 10, 30, or 50 g of coffee waste was mixed with 1000 ml of distilled water and recycled aggregates. The lowest pH was about 6.2 when 50 g of coffee waste was mixed. Aggregates were treated with microwave or soaked for 1 day in vinegar (pH = 2) for neutralization reaction. Microwave treated and neutralized aggregates showed 3.3% and 6.2% higher crushing values compared to non-treated one, respectively. Neutralized treatment was more effective for crushing. In crushing tests, a sample height of 120 mm was tried, which gave 6.3% higher crushing value. A four stepped loading with each 100 kN gave 7.1% higher crushing value, compared to standard 100 mm height and 400 kN continuous loading.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.533-542
• /
• 2001

In this paper, we present a scheduling method for real-time mobile transaction manager in mobile computing environment. The proposed method checks whether a transaction is executable or not. It is able to by considering not only the deadline of real-time data in mobile hosts. And then, it schedules the real-time mobile transactions by making optimal execution window based on the priority queue, while considering transaction value and deadline. Disconnection with mobile hosts is monitored in selecting the transaction for execution. Using the proposed method reduces the number of restarting times after transaction aborts which is caused by the violation of the validity constraints of real-time data. And in has merits of maximizing the sum of values of real-time mobile transactions which meet the deadline. The performance evaluation demonstrates that the number of committed real-time transactions within the deadline is improved by 20%. This method can be used in real-time mobile transaction manager is such environments as cellular communications, emergency medicine information system and so on.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.562-566
• /
• 2012

A novel design of tubular segmented-in-series(SIS) solid oxide fuel cell (SOFC) sub module was presented in this paper. The tubular ceramic support was fabricated by the extrusion technique. The NiO-YSZ anode and the yttria-stabilized zirconia (YSZ) electrolyte were deposited onto the ceramic support by dip coating method. After sintering at $1350^{\circ}C$ for 5 h, a dense and crack-free YSZ film was successfully fabricated. Also, the multi-layered cathode composed of LSM-YSZ composite, LSM and LSCF were coated onto the sintered ceramic support by dip coating method and sintered at $1150^{\circ}C$. The performance of the tubular SIS SOFC cell and sub module electrically connected by the Ag-glass interconnect was measured and analysed with different fuel flow and operating temperature.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.718-724
• /
• 2018

In this study, the $Ni_{0.9}Co_{0.05}Ti_{0.05}(OH)_2$ precursor was prepared by the concentration gradient co-precipitation method. In order to overcome the structural change due to oxygen desorption in the cathode active material with high nickel content, the physical and electrochemical analysis of the cathode active material according to the calcination temperature were investigated. Physical properties of $Li_{1.05}Ni_{0.9}Co_{0.05}Ti_{0.05}O_2$ were analyzed by FE-SEM, XRD and TGA. The electrochemical performance of the coin cell using a cathode active material and $LiPF_6$(EC:EMC=1:2 vol%) electrolyte was evaluated by the initial charge/discharge efficiency, cycle retention, and rate capabilities. As a result, the initial capacity and initial efficiency of cathode materials were excellent with 244.5~247.9 mAh/g and 84.2~85.8% at the calcination temperature range of $750{\sim}760^{\circ}C$. Also, the capacity retention exhibited high stability of 97.8~99.1% after 50cycles.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2016

This study found a proper parametric life distribution based on maintenance history data of each bridge member under the jurisdiction of the Korea Expressway Corporation for the past 10 years by introducing the concept of reliability and suggested a measure to calculate the mean life and reliability of each bridge member using the parameter obtained with the maximum-likelihood classification. As a result of analyzing the exponential distribution, weibull distribution and log normal distribution being utilized frequently in order to find the parametric life distribution type which well described the life data of each bridge member, it was found that the log normal distribution and weibull distribution described the characteristics of the relevant life data the best. As a result of calculating the mean life of each bridge member based on the estimated parameter, the average life of the steel bridge coating was 18.51 years which was the longest, followed by the bridge deck as 17.56 years. The mean life of the drainage facility and the bridge bearing were 12.27 years and 12.57 years respectively, showing the shortest life.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.184-188
• /
• 2008

This study presented simple and efficient fabrication of chemical sensors for the detection of acidic gas using 1,3-bisdicyanovinylindane as an indicator because it can be promising materials having property of the rapid color change according to the variation of pH. The dissociation of proton and dye in acidic condition as changing of ion pairs give rise to dramatically change the absorbance intensity of 1,3-bisdicyanovinylindane, which can be easily applied to the development of chemical sensors. In addition, indicator dyes having negatively charge in aqueous phase can be easily fabricated using layer-by-layer (LBL) methods by way of electrostatic interaction. For the proof of concept, we demonstrated the abrupt presentation of skeleton symbol on the chemical sensor, which could be resulted from the reaction of 1,3-bisdicyanovinylindane as background color with acidic gas. Thus, the rapid appearance of symbol will induce user's caution under the emergency condition. The presented chemical gas sensor using 1,3-bisdicyanovinylindane have strong advantages. First, the fabrication process of gas sensor was very simple and low-cost. Secondly, sensors reacted by acidic gas could be reused for several times. Finally, the chemical gas sensor would be environmentally friend, which can be a basic tool for the realization of eco-organic sensor device.

• Journal of Korea Foresty Energy
• /
• v.7 no.1
• /
• pp.11-21
• /
• 1987

To estimate the biomass, net production and nutrient distribution of Pinus Koraiensis and Quercus mongolica stand, experimental plots located in Kwangju of Kyonggi-do were selected. Ten sample trees selected account of DBH distribution were felled and the diagram of oven-dry weight distrubution of leaves, branches and stems for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the variable of $(DBH)^2$ H obtained. The standing crops were estimated to be as much as 152.07 and 156.02 tons of dry matter per hectare in P. koraiensis and Q. mongolica stand respectively. The net production was estimated as 24.66 and 20.35t/ha$\cdot$yr and the net assimilation rate was 1.90 and 3.42kg/kg$\cdot$yr in same order. Particulary large proportions of nitrogen. calcium and magnesium were found in soil of P. koraiensis stand, phosphours and potassium in overstory of it. At Q. mongolica stand, large proportions of nitrogen. phosphorus. potassium and magnesium were found in soil and calcium in overstory. The amounts of litter fall was 4.013t/ha$\cdot$8 months in P. koraiensis stand and 3.490t/ha$\cdot$8 months in Q. mongolica stand.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.239-261
• /
• 2001

A large suite of official statistical data sets has been compiled for geographical units under the national directives, and it is the quantitative regional analysis procedures that could add values to them. This paper reports our attempts at prototyping a statistical GIS which is capable of serving over the Web a variety of regional analysis routines as well as value-added statistics and maps. A pilot database of some major statistical data was ingested for the city of Seoul. The baseline subset of regional analysis methods of practical usage was selected and accommodated into the business logic of the target system, which ranges from descriptive statistics, regional structure/inequality measures, spatial ANOVA, spatial (auto) correlation to regression and residual analysis. The leading-edge information technologies including the application server were adopted in the system design and implementation so that the database, analysis modules and analytic mapping components may cooperate seamlessly behind the Web front-end. The prototyped system supports tables, maps, and files of downloadable format for input and output of the analyses. One of the most salient features of out proposed system is that both the database and analysis modules are extensible via the bi-directional interface for end users; The system provides users with operators and parsers for algebraic formulae such that the stored statistical variables may be transformed and combined into the newly-derived set of variables. This functionality eventually leads to on-the-fly fabrication of user-defined regional analysis algorithms. The stored dataset may also be temporarily augmented by user-uploaded dataset; The extension of this form, in essence, results in a virtual database which awaits for users commands as usual. An initial evaluation of the proposed system confirms that the issues involving the usage and dissemination of information can be addressed with success.