• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.965-976
• /
• 2006

A realistic lifetime seismic-reliability based approach is unavoidable to perform Life-Cycle Cost (LCC)-effective optimum design, maintenance, and retrofitting of structures against seismic risk. So far, though a number of researchers have proposed the LCC-based seismic design and retrofitting methodologies, most researchers have only focused on the methodological point. Accordingly, in most works, they have not been quantitatively considered critical factors such as the effects of seismic retrofit, maintenance, and environmental stressors on lifetime seismic reliability assessment of deteriorating structures. Thus, in this study, a systemic lifetime seismic reliability analysis methodology is proposed and a program HPYER-DRAIN2DX-DS is developed to perform the desired lifetime seismic reliability analysis. To demonstrate the applicability of the program, it is applied to an example bridge with or without seismic retrofit and maintenance strategies. From the numerical investigation, it may be positively stated that HYPER-DRAIN2DX-DS can be utilized as a useful numerical tool for LCC-effective optimum seismic design, maintenance, and retrofitting of bridges.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.251-267
• /
• 1991

Plastic strength analysis using plastic failure mode as a limit state is adopted instead of a conventional elastic structural analysis to predict the ultimate strength of Web frame idealized by a plane frame. Linear programming arid Compact procedure are developed for determining the collapse load factor. It is found that the final results are good agreement with the results of Elasto-plastic analysis. Besides, the redundant structures like Web frame is known to have multiple failure modes. Web frame may collapse under any of the possible failure modes. Thus, the identification of these possible failure modes is necessary and very important in the reliability analysis of Web frame. In order to deal with multiple failure modes, automatic generation method of all failure modes and basic failure modes is used for selecting the dominant failure modes. The probability of failure pastic collapse of Web frame is calculated using these dominant failure modes. The safety of Web frame is asscssed and compared by performing the deterministic and probabilistic analysis.

• Journal of Information Technology and Architecture
• /
• v.11 no.1
• /
• pp.33-44
• /
• 2014

Recently, blogs have attracted much attention as personal media. The power of blogs as a way to provide valuable resources on Internet is so tremendous because of the high speed of information dissemination and the huge influence of the circulated information on Internet users even when the information itself is not true. Especially, contents on blogs that attract a lot of public attention are sometimes reproduced or magnified in an inappropriate way. In this paper, a method to measure the trust level of contents posted on personal blogs is proposed to reduce the damage of wrong information circulated along with blog networks. Trust variables such as relationship data in SNS are used to measure the comparative trust level of blog contents. The structure of the prototype system is also designed to apply this framework to blogsphere.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.48-55
• /
• 2016

The assessment and prediction of service life of a structure are usually under uncertainty so that rational probabilistic concepts and methods have to be applied. Based on these rational assessment and prediction, optimum maintenance strategies to minimize the life-cycle cost and/or maximize the structural safety can be established. The service life assessment and prediction considering maintenance actions generally includes effects of maintenance types and times of the structural components on the service life extensions of structural system. Existing researches on the service life management have revealed the appropriate system modeling considering the correlation among the components is required for system reliability analysis and probabilistic service life estimation. However, the study on correlation among the maintenance actions is still required. This paper deals with such a study for more effective and efficient service life management. In this paper, both the preventive and essential maintenances are considered for the extended service life estimation and management.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.1-10
• /
• 2013

Probabilistic nonlinear first ply failure loads of flat composite panels and nonlinear buckling loads of curved composite panels with cutouts are estimated to provide the more reliable main load carrying structure in the renewable energy industry and offshore structures. The response surface method approximates limit state surface to a second order polynomial form of random variables with the results of deterministic finite element analyses at given sampling design points. Furthermore, the iterative linear interpolation scheme is used to obtain a more accurate approximation of the limit state surface near the most probable failure point (MPFP). The advanced first order second moment method and the Monte Carlo method are performed on an approximated limit state surface to evaluate the probability of failure. Finally, the sensitivity of the reliability index with respect to transformed random variables is investigated to figure out the main random variables that have an effect on failures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.97-106
• /
• 2001

본 연구에서는 트러스 구조물의 이산최적설계를 위해 유전알고리즘(GA)을 적용하였다. 확률론적인 절차를 통해 설계에 필요한 초기 집단을 생성시킨 후, 설계를 개선시키기 위해서 자연선택 및 적자생존의 원리를 적용하였다. 다하중조건 하에서 트러스 구조물의 중량 최소화를 위해 응력 및 변위 제약을 고려하였다. 먼저, 이미 잘 알려진 트러스 구조물에 대해서 GA를 이용하여 얻은 최적해와 기존 문헌들에서 제시하고 있는 값들을 비교함으로써 GA의 신뢰성 및 적용성을 검증하였고, 이러한 신뢰성 검증을 바탕으로 사용성 있는 트러스 구조물의 이산최적설계를 위해 현재 생산중인 강재제원표로부터 부재가 선택되도록 하였다. 강재의 단면으로는 L형강을 사용하였으며, L형강의 강종은 9개의 강종들 (SS 400, SWS 400, SMA 41, SWS 490Y, SWS 520, SMA 50, SWS 570, SMA 58) 중에서 설계자에 의해 자유롭게 선택되도록 하였다.

• Computational Structural Engineering
• /
• v.5 no.2
• /
• pp.93-104
• /
• 1992

The final objective of optimization methods is to find global optimum accurately and efficiently. The optmization processes by simulated annealing and genetic algorithm which have stochastic search process are examined and are applied to several mathematical models and truss, beam structures. Then the robustnesses of these two methods are studied and compared with the results of deterministic optimization methods from the viewpoints of reliability and running time in obtaining the global optimum.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.115-124
• /
• 1993

A structural system reliability analysis is studied for the safety assessment of midship section. Probabilistically dominant collapse modes are generated by Element Replacement Method and Incrimental Load Method. In order to avoid generating the same modes repeatedly, it is branched at final plastic hinge. Using first and second order bound methods, system failure probability of midship section is computed and compared with deterministic load factor method to show the usefulness of the proposed method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.72-79
• /
• 2015

An efficient and practical reliability evaluation method is proposed for the coastal structures in this paper. It is capable of evaluating reliability of real complicated coastal structures considering uncertainties in various sources of design parameters, such as wave and current loads, resistance-related design variables including Young's modulus and compressive strength of the reinforced concrete, soil parameters, and boundary conditions. It is developed by intelligently integrating the Latin Hypercube sampling (LHS), Monte Carlo simulation (MCS) and the finite element method (FEM). The LHS-based MCS is used to significantly reduce the computational effort by limiting the number of simulation cycles required for the reliability evaluation. The applicability and efficiency of the proposed method were verified using a caisson-type breakwater structure in the numerical example.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.45-52
• /
• 2009

In conventional structural design, deterministic optimization which satisfies codified constraints is performed to ensure safety and maximize economical efficiency. However, uncertainties are inevitable due to the stochastic nature of structural materials and applied loads. Thus, deterministic optimization without considering these uncertainties could lead to unreliable design. Recently, there has been much research in reliability-based design optimization (RBDO) taking into consideration both the reliability and optimization. RBDO involves the evaluation of probabilistic constraint that can be estimated using the RIA (Reliability Index Approach) and the PMA(Performance Measure Approach). It is generally known that PMA is more stable and efficient than RIA. Despite the significant advancement in PMA, RBDO still requires large computation time for large-scale applications. In this paper, A new reliability-based design optimization (RBDO) method is presented to achieve the more stable and efficient algorithm. The idea of the new method is to integrate a response surface method (RSM) with PMA. For the approximation of a limit state equation, the moving least squares (MLS) method is used. Through a mathematical example and ten-bar truss problem, the proposed method shows better convergence and efficiency than other approaches.