• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.213-225
• /
• 2018

For constructing three-dimensional (3D) spatial information occlusion region problem arises in the process of taking the texture of the building. In order to solve this problem, it is necessary to investigate the automation method to automatically recognize the occlusion region, issue it, and automatically complement the texture. In fact there are occasions when it is possible to generate a very large number of structures and occlusion, so alternatives to overcome are being considered. In this study, we attempt to apply an approach to automatically create an occlusion region based on learning by patterning the blocked region using the recently emerging deep learning algorithm. Experiment to see the performance automatic detection of people, banners, vehicles, and traffic lights that cause occlusion in building walls using two advanced algorithms of Convolutional Neural Network (CNN) technique, Faster Region-based Convolutional Neural Network (R-CNN) and Mask R-CNN. And the results of the automatic detection by learning the banners in the pre-learned model of the Mask R-CNN method were found to be excellent.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.69-73
• /
• 2018

This study examined the reduction effect of a hydrodynamic force acting on the vertical wall of a portable water storage tank with a convex bottom floor. For the numerical simulation, the linearized Peregrine's equation was used to analyze the lapping waves in the tank caused by water falling from a supplying nozzle. The hydrodynamic force could be calculated by measuring the maximum run-up wave height at the vertical wall. The initial conditions of the numerical experiments were set up by controlling the positions and heights of the water supplying nozzle. Finally, the hydrodynamic force acting on the vertical wall can be reduced by the convex bottom design of the portable water storage tank so it can be applied to improve the structural stability.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.7
• /
• pp.171-178
• /
• 2019

Auto Climbing Formwork System (ACS) for construction of high-rise building is a construction method for automatically lifting the formwork system supported by the anchor on the pre-constructed concrete wall. It has excellent construction speed and quality, but it has the possibility of structural failure depending on the quality of concrete and also has low economical efficiency due to the use of foreign technology. In order to overcome these problems, this study conducted an optimum design for the development of a new concept of Corner Supported Auto Climbing System (CS-ACS) in conjunction with the development of corner steel-reinforced concrete core wall system. For the design the formwork system, the basic module and structural member compositions were planned, and the structural analysis program was used to analyze the optimum member's cross section and spacing. As a result, the horizontal displacement and the stress of the horizontal members were influenced by the spacing more than the cross-section of the member. On the other hand, vertical members did not affect the displacement and stress of the formwork system. The form tie was very effective in controlling the displacement when adjusting the spacing of the horizontal members, but when the spacing of the form tie is more than 1,500mm, it is analyzed that form tie is yielding in basic module. When the span of the formwork system is more than 30m, it is analyzed that the basic module needs to be changed because of the increase of overall displacement.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.102-107
• /
• 2002

This study deals with a physical properties of Larch(Larix kaemferi Carr.) treated at temperatures above 100℃. Treatment conditions of this experiment were operated at regular intervals of 20℃ at temperature up to 180℃ for 10, 30, 60 and 90 minutes by using the bomb, respectively. The results of this study were as follows : 1) The density was decreased with increasing the times and temperatures of steaming. 2) It was considered that the steaming treated specimen's higher shrinkage compared to control was due to change of composition and structure in cell wall. 3) The warpage of half edge grain specimen was decreased by high temperature steaming.

• Journal of the Korea Society for Simulation
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2009

Enterprise security management system proposed to properly manage heterogeneous security products is the security management infrastructure designed to avoid needless duplications of management tasks and inter-operate those security products effectively. In this paper, we defined the security policies using Z-Notation and the detection algorithm of policy conflict for managing heterogeneous firewall systems. It is designed to help security management build invulnerable security policies that can unify various existing management infrastructures of security policies. Its goal is not only to improve security strength and increase the management efficiency and convenience but also to make it possible to include different security management infrastructures while building security policies. With the process of the detection and resolution for policy conflict, it is possible to integrate heterogeneous security policies and guarantee the integrity of them by avoiding conflicts or duplications among security policies. And further, it provides convenience to manage many security products existing in large networks.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.99-104
• /
• 2007

The deep soil mixing, on ground modification technique, has been used for many diverse applications including building and bridge foundations, port and harbor foundations, retaining structures, liquefaction mitigation, temporary support of excavation and water control. This method has the basic objective of finding the most efficient and economical method for mixing cement with soil to secure settlements through improvement of stability on soft ground. In this research, the experiments were conducted on a laboratory scale with the various test conditions of mixing method; the angle of mixing wing, mixing speed. Strength and shapes of improved soil of these test conditions of deep mixing method were analysed. From the study, it was found that the mixing conditions affect remarkably to the strength and shapes of improved soils.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2022

Bacteria grow biofilm on various surface such as separation membrane, food packaging film and biomedical device. Growth of biofilm is associated with the formation of a complex structure of exopolysaccharides. Effect of antibacterial effect reduce drastically once the biofilm developed due to the difficulties in mass transport of antimicrobial agent. In order to enhance the antibacterial activity, surface of the membrane is modified, coated or immobilized with functional materials with biocidal properties. One of the idea is to introduce positive charge on the membrane surface by the presence of quaternary ammonium group which might displace divalent metal ion such as magnesium or calcium present in the bacteria cell wall. Efficacy of cell membrane disruption depends on the mobility of the agents available directly on the surface environment. In this review, various biocidal agents like quaternary ammonium group, helamine or zwitter ion containing membrane are discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.49-49
• /
• 2020

하천 보 상류영역에서 발생하는 박리 흐름을 분석하기 위해 실험수로에 하천보 모형을 설치하고, 보 주변에서 발생하는 흐름 구조를 입자 영상 유속계(PIV)로 이용하여 정밀하게 측정하였다. 본 연구에 사용된 보는 하천 설계기준을 따른, 전방 수직벽과 하류 경사램프가 있는 유한한 마루 길이 보이다. 실험 조건은 보 상·하류부 수심으로 인한 4가지 흐름(Hydraulic jump, Plunging jet, Surface wave, Surface jet)을 기반으로 설정하여 수리조건에 따른 유속 특성을 규명하였다. 실험에서 측정한 수직-수평방향 평균 유속·유선도를 분석한 결과, 보 전방의 하부에서 재순환 흐름이 관측되었고, 역방향 흐름도 이 지역에서 발견되었다. 유속 편차의 제곱 평균(Root Mean Square) 흐름장에서 보 전방과 재순환 흐름 영역에 불안전한 흐름이 강하게 발견되었다. 역방향 흐름은 박리 흐름에서 발견되는 주요 특성으로, 역방향 흐름의 전체 면적을 매 관측마다 측정하여 이를 분석한 결과, 재순환 흐름의 면적은 오른쪽으로 기울어진 분포를 가지고, 항상 0보다 큰 값을 가지는 것으로 나타났다. 재순환 면적에 따른 흐름 특성은 역방향 흐름 면적에 대한 조건부 평균을 이용하여 파악했는데, 조건부 평균의 구간은 재순환 흐름의 중심에서 지배적인 주기값을 이용했다. 역방향 흐름이 작은 영역에선, 보 상류의 흐름이 재순환 흐름으로 말려들어가는 열린 박리흐름이 나타나며, 역방향 흐름이 큰 경우에는 재순환 영역의 흐름은 보 상류의 흐름과 분리되는 닫힌 박리흐름이 발생하였다. 역방향 흐름이 가장 큰 경우, 보 전방의 박리흐름은 보의 상단을 넘는 것으로 관찰되었다. 이러한 결과를 통해 보 마루에서 발생하는 박리흐름이 보 전방에 박리흐름에 영향을 미치는 것으로 파악되었다. 조건부 평균된 역방향 흐름의 면적과 박리 지점(separation point)의 관계를 분석한 결과, 역방향 흐름의 오른쪽으로 기울어진 분포와 대규모 흐름 방출 현상이 관측되었다. 박리 지점의 위치와 수리 매개변수의 관계를 분석한 결과, 상류의 수심 증가에 따라 증가하는 경향이 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.311-316
• /
• 2006

Despite geospatial information systems are widely used in many different fields as a powerful tool for spatial analysis and decision-making, their capabilities to handle realistic 3-D urban environment are very limited. The objective of this work is to integrate the recent developments in 3-D modeling and visualization into GIS to enhance its 3-D capabilities. To achieve a photorealistic view, building models are collected from a pair of aerial stereo images. Roof and wall textures are respectively obtained from ortho-rectified aerial image and ground photography. This study is implemented by using ArcGIS as the work platform and ArcObjects and Visual Basic as development tools. Presented in this paper are 3-D geometric modeling and its data structure, texture creation and its association with the geometric model. As the results, photorealistic views of Purdue University campus are created and rendered with ArcScene.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2C
• /
• pp.41-49
• /
• 2009

Due to the increased size of civil infrastructure and the cost of materials, the needs exists for utilizing large sized cast-inplace piles in lieu of conventional precast piles. Among them, the barrette pile has become more commonly used in fields where a diaphragm wall is the retaining wall, to improve workability and economical efficiency, and to ensure hole stability under deep soil layers. In this paper, the bearing capacity and displacement characteristics of the barrette pile are evaluated by using the bi-directional loading test data obtained from four different sites. In addition, the design value of pile shaft resistance, ${\beta}$, is assessed with previous literatures and load transfer analysis. Finally, numerical analyses were performed to analyze the load-displacement behavior, and the interface effect on the piles, using the 3-dimensional finite element method.