• Journal of computational fluids engineering
• /
• v.12 no.2
• /
• pp.8-13
• /
• 2007

A general purpose program NUFLEX for the analysis 3-D thermo/fluid flow and pre/post processor in complex geometry has been developed, which consists of a flow solver based on FVM and GUI based pre/post processor. The solver employs a general non-orthogonal grid system with structured grid and solves laminar and turbulent flows with standard/RNG $k-{\varepsilon}$ turbulence model. In addition, NUFLEX is incorporated with various physical models, such as interfacial tracking, cavitation, MHD, melting/solidification and spray models. For the purpose of evaluation of the program and testing the applicability, many actual problems are solved and compared with the available data. Comparison of the results with that by STAR-CD or FLUENT program has been also made for the same flow configuration and grid structure to test the validity of NUFLEX.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.87-90
• /
• 2007

A general purpose program NUFLEX for the analysis 3-D thermo/fluid flow and pre/post processor in complex geometry has been developed, which consists of a flow solver based on FVM and GUI based pre/post processor. The solver employs a general non-orthogonal grid system with structured grid and solves laminar and turbulent flows with standard/RNG ${\kappa}-{\varepsilon}\;SST$ turbulence model. In addition, NUFLEX is incorporated with various physical models, such as interfacial tracking, cavitation, MHD, melting/solidification and spray model. For the purpose of verification of the program and testing the applicability, many actual problems are solved and compared with the available data. Comparison of the results with that by STAR-CD or FLUENT program has been also made for the same flow configuration and grid structure to test the validity of NUFLEX.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.3-10
• /
• 2018

Cladding that finishes the exterior of a building could enhance the value of the building, and shape control is an important factor. With the recent development of 3D printing, cementitious claddings were printed by 3D printer in China, U.S.A and elsewhere. On the other hand, the structural safety of the exterior panel should be examined, as casualties occur when the exterior panel fails due to typhoon or impact. Cement-based cladding is reinforced by wire mesh to improve safety. Introducing 3D printing composite system with polymer and cement, makes it possible to produce claddings fast and accurate. Prior to the development of 3D printing cementitious cladding, the major parameters influencing the optimal shape were identified based on structural performance. The wind load, joint, and bond behavior between polymer and cement were considered. Polymer laminate shape, order, and thickness were variables, and finite element analysis was performed.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.588-594
• /
• 2001

본 연구를 통해 초음속 전투기 날개의 공력-구조를 동시에 고려한 다학제간 설계를 수행하였다. 공력해석을 위해 사용된 3 차원 Euler Code는 수렴 속도를 개선하기 위해 Multigrid를 적용하였으며, 3차의 transfinite interpolation을 사용하여 O-H type의 공력해석 격자계를 생성하였다. 구조 분야는 절점당 54개의 자유도를 가지는 9 절점 쉘 혼합 유한요소(9-node shell mixed finite element)를 사용하여 해석을 수행하였다. 설계변수는 공력쪽으로 날개의 평면형상에 관련된 변수 3개, 구조쪽은 날개 윗면과 아래면의 표피두께에 관련된 4개의 설계변수 사용하였으며, D-optimality 조건을 만족시키는 실험점들에 대해 공력해석과 구조해석이 연동된 정적 공탄성 해석을 수행한 후, 반응면 기법을 이용하여 목적함수와 제약조건에 대한 반응면을 구성하였다. 단일점 설계를 수행한 후 이를 바탕으로 3개의 설계점을 동시에 고려한 다점 설계를 수행하였으며, 공력만을 고려한 설계 결과와 공력-구조를 동시에 고려한 다학제간 설계결과의 비교를 통해 다학제간 설계의 타당성과 우수성을 입증하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.312.2-312.2
• /
• 2014

실리콘은 광센서, 태양전지, 발광다이오드 등 광소자 응용 분야에서 널리 사용되고 있는 물질이다. 그러나 실리콘의 높은 굴절율(n~3.5)은 표면에서 약 30% 이상의 Fresnel 반사를 발생시켜 소자의 효율을 감소시키는 원인이 된다. 따라서, 반사손실을 줄이기 위해서는 실리콘 표면에 효율적인 무반사 코팅을 필요로 한다. 기존의 단일 혹은 다중 박막을 이용한 무반사 코팅 기술은 물질간 열팽창계수의 불일치, 접착력 문제, 박막 두께 조절 및 적합한 굴절율을 갖는 물질 선택 어려움 등의 단점을 지니고 있다. 최근, 이러한 무반사 코팅 기술의 대안으로 곤충 눈 구조를 모방한 나노크기의 서브파장 격자구조 (subwavelength gratings, SWGs)에 대한 연구가 활발히 이루어지고 있다. 이러한 SWGs 구조는 공기와 반도체 표면 사이에 점진적, 선형적으로 변화하는 유효굴절율을 갖기 때문에, 광대역 파장영역뿐만 아니라 다양한 각도에서 입사하는 빛에 대해서도 효과적으로 Fresnel 표면 반사를 낮출 수 있다. 본 연구에서는 실리콘 기판 표면 위에 효율적인 무반사 특성을 갖는 계층적 SWGs 나노구조를 제작하기 위해, 레이저간섭리소그라피 및 열적응집금속 입자를 이용한 식각 마스크 패터닝 방법과 유도결합플라즈마 식각 공정을 이용하였다. 제작된 무반사 실리콘 SWGs 나노구조의 표면 및 식각 프로파일은 전자주사현미경으로 관찰하였고, 표면 접촉각 측정 장비를 이용하여 샘플 표면의 젖음성을 확인하였다. 제작된 샘플의 광학적 특성을 조사하기 위해 UV-vis-NIR 스펙트로미터와 엘립소미터 측정 시스템들을 이용하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.157-163
• /
• 2006

Vibration and deformation sensing control of lightweight structures using optical fiber sensor technology is introduced in this presentation. This paper shows several examples of vibration control and deformation estimation for structures using these optical fiber sensor systems. Among various optical fiber sensors, in this paper, two types of optical fiber sensors, Fabry-Perot Interferometer(EFPI) and Fiber Bragg Grating(FBG) sensors, are mainly dealt with. Fiber optic sensors show many advantages over conventional strain gages for the measurement of vibration and deformation of lightweight structures.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.225-237
• /
• 1998

본 연구의 목적은 가로망의 구조 및 통행수요의 변화에 따라 통행 중 교통정보제공의 효과가 어떻게 달라지는가를 모의실험을 통하여 분석하고자 하는 것이다. 이를 위하여 본 연구에서는 실제의 대규모 가로망에 대하여 적용할 수 있는 통행배정기법을 제안하였다. 제안된 모형은 시간의 흐름에 따른 가로망의 상태를 고려하여 통행을 배정하는 방법으로 $\ulcorner$시간종속적 통행배정$\lrcorner$이라 명하였다. 본 연구에서는 가로망 형태(격자형 및 방사환상형), 가로망 크기, 통행수요의 지역별 분포, 그리고 교통혼잡정도에 따라 각각 시나리오를 작성하고, 각 시나리오에 대하여 모의실험 및 사례연구(노드 348개, 링크 1179개)를 통해 정보를 받는 차량의 비율에 따른, 그리고 정보를 제공하는 빈도에 따른 통행중 교통정보제공에 대한 효과를 분석하였다. 연구 결과, 모의실험에서는 정보를 받는 차량의 비율이 30%~70% 구간에서 14%까지의 총체계비용의 감소효과가 나타났으며, 가로망의 규모가 클수록, 혼잡이 심할수록, 그리고 대안도로가 많을수록 교통정보제공의 효과는 커지는 것으로 분석되었다.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2008

Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.153-158
• /
• 2016

In this paper, TE(transverse electric) scattering problems by a conductive strip grating between grounded double dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the conductive boundary condition is applied to analysis of the conductive strip. The numerical results for normalized reflected power are analyzed by according as the width and spacing of conductive strip, the relative permittivity and thickness of the double dielectric layers, and incident angles. The most normalized reflected powers of the sharp variations in minimum values are scattered in direction of the other angles except incident angle. The numerical results for the presented structure of this paper having a grounded double dielectric layer are shown in good agreement compared to those of the existing papers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.73-79
• /
• 2018

In this paper, TM(transverse magnetic) scattering problems by a conductive strip grating between a double dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the conductive boundary condition is applied to analysis of the conductive strip. The most normalized reflected powers of the sharp variations in minimum values are scattered in direction of the other angles except incident angle. Generally, in the case of numerical analysis except for reflection and transmission power in free space, as the dielectric constants of the double dielectric layer increases, the reflected power increases and the transmitted power decreases relatively, respectively. The numerical results for the presented structure of this paper having a grounded double dielectric layer are shown in good agreement compared to those of the existing papers.