• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.347-353
• /
• 1997

BaTiO$_{3}$물질은 뛰어난 유전체로 널리 알려져 왔으며 특히 Heywang등이 제안한 PTCR특성은 이 물질의 응용범위를 세라믹 필터, 회로보호소자, 온도감지소자 및 저항가열장치 등으로 확대시켰다. 이러한 특성의 발현기구는 아직까지 밝혀지지 않은 상태이지만 제 특성을 향상시키기 위한 노력은 계속되어왔다. 특히 개발목적에 맞게 온도에 따른 정저항 특성(PTCR; Positive temperature constnat of resistivity phenomena)을 설계하려는 시도가 계속되어 왔으며 그 중에서도 페로브스카아트계의 2가와 4가의 양이온 자리를 등가나 원자가가 다른 양이온으로 치환하여 특성을 개선하려는 시도가 계속되어 왔다. 특히 $Ca^{2+}$나 Sr$^{2+}$는 $Ba^{2+}$자리를 치환할 수 있는 물질로 개별적인 첨가에 대한 연구는 많은 연구자들에 의해 진행된 상태이지만 최종적인 영향이나 해석에 대해서는 연구자들간에 이견이 많은 상태이다. 이번 실험에서는 BaTiO$_{3}$계에 합성한 (Ca, Sr)TiO$_{3}$를 Ca와 Sr의 상대적인 비를 변화시키면서 전체적인 첨가량을 변화시켜 그에 따른 전기적 특성 및 미세구조를 살펴보았다. (Ca, Sr)TiO$_{3}$의 첨가로 상온저항 및 PTCR특성을 변화시킬 수 있었으며 이를 통해 PTCR물질의 활용범위를 넓힐 수 있는 발판을 마련할 계기가 되었다. 특히 기존의 연구가 주로 개별적인 Ca나 Sr의 첨가에 의한 미세구조와 전기적 특성변화의 연구에 치중해 있었던 것과는 달리 Sr과 Ca을 함께 치환하여 상대적인 비가 특성에 더 중요한 영향을 끼치는 것을 확인하였으며 적절한 합성비를 선택하면 퀴리온도에서의 저항변화폭을 유지하면서 상온저항을 낮출 수 있음을 확인하였다.문했던 연구소인 Shanghai Research Center of Biotechnology, Shanghai Institute of Industrial Microbiology 및 Scientific Research Institute of Food and Fermentation Industry을 소개하고저 한다. 짧은 기간의 방문이라 주로 해당연구소의 자체소개 자료를 중심으로 방문하면서 느낀점을 기술하고저 한다.초염기성암 기원의 사문암이 열수변질작용을 받아 생성되었음을 명확하게 지시하며, 따라서 활석 광석내에 존재하는 녹니석은 활석의 근원 광물로서 녹니석편암 및 녹니석 편마암 매의 녹니석이 활석화되고 남은 잔존광물이 아니라, 주변암에 의해 성분상의 영향을 받은 열수와 사문암과의 변질교대작용에 의한 활석화과정 중에 주로 생성된 것으로 추정된다. 이러한 결과는 연구지역의 활석광상이 초염기성암의 사문암화 작용과 활석화 작용의 두 가지 변질작용에 의해 형성되어졌음을 알려준다.농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회로의 복귀가 빠르며, 고위험군에 적용할 수 있고, 무엇보다도 미용상의 이점이 크다는 면에서 자연기흉에 대해 유용한 치료방법임에는 틀림이 없으나 개흉술에 비해 재발율이 높고 비용이 비싸다는 문제가 제기되고 있는 만큼 더 세심한 주의와 장기 추적관찰이 필요하리라 사료된다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.35-63
• /
• 1991

Currently, Korea's banking industry holds a sizable amount of non-performing loans which stem from the government-led bailout of many troubled firms in the 1980s. Although this burden was somewhat relieved with the aid of banks' recapitalization in the booming securities market between 1986-88, the insolvent credits still resulted in low profitability in the banking sector and have been detrimental to the progress of financial liberalization and internationalization. This paper surveys the corporate bailout experiences of major advanced countries and Korea in the past and derives a rationale for readjustment measures against non-performing loans, in which rescue plans depend on the nature of the financial system. Considering the features of Korea's financial system and the banking sector's recent performance, it discusses possible means of liquidation in keeping with the rationale. The conflict of interests among parties involved in non-performing loans is widely known as one of the major constraints in writing off the loans. Specifically, in the case of Korea, the government's excessive intervention in allocating credits has preempted the legitimate role of the banking sector, which now only passively manages its past loans, and has implicitly confused private with public risk. This paper argues that to minimize the incidence of insolvent loan readjustment, the government's role should be reduced and that the correspondent banks should be more active in the liquidation process, through the market mechanism, reflecting their access to detailed information on the troubled firms. One solution is that banks, after classifying the insolvent loans by the lateness or possibility of repayment, would swap the relatively sound loans for preferred stock and gradually write off the bad ones by expanding the banks' retained earnings and revaluing the banks' assets. Specifically, the debt-equity swap can benefit both creditors and debtors in the sense that it raises the liquidity and profitability of bank assets and strengthens the debtor's financial structure by easing the debt service burden. Such a creditor-led or market-led solution improves the financial strength and autonomy of the banking sector, thereby fostering more efficient resource allocation and risk sharing.

• Food Science and Industry
• /
• v.52 no.2
• /
• pp.188-201
• /
• 2019

In the past, food additives were classified and managed as chemical synthetic and natural additives according to the manufacturing process, but it was difficult to confirm the purpose or function of food additives.CODEX, an internationalstandard, classifies food additives according to their practical use, based on scientific evidence on the technical effects of food additives, instead of classifying them as synthetic or natural. Therefore, very recently, the food additive standards in Korea have been completely revised in accordance with these global trends. Currently, the classification system of food additives is divided into 31 uses to specify their functions and purposes instead of manufacturing methods. Newer revision of the legislative framework for defining and expanding the scope of the Act as an enlarged area is required. Competition for preempting new food products based on bio-based technology is very fierce in order to enhance the safety of domestic people and maximize the economic profit of their own countries. In this age of infinite competition, it is very urgent to revise or supplement the current regulations in order to revitalize the domestic food industry and enhance national competitiveness through the development of food additives using new biotechnology. In this report, current laws on domestic food ingredients, food additives and manufacturing methods, and a comparison of domestic and foreign advanced countries' regulations and countermeasures strategies were reviewed to improve national competitiveness of domestic advanced biotechnology-based food additives industry.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.153-163
• /
• 2017

The objective of this study is to enhance the model's speed of estimating weather variables (e.g., minimum/maximum temperature, sunshine hour, PRISM (Parameter-elevation Regression on Independent Slopes Model) based precipitation), which are applied to the Agrometeorological Early Warning System (http://www.agmet.kr). The current process of weather estimation is operated on high-performance multi-core CPUs that have 8 physical cores and 16 logical threads. Nonetheless, the server is not even dedicated to the handling of a single county, indicating that very high overhead is involved in calculating the 10 counties of the Seomjin River Basin. In order to reduce such overhead, several cache and parallelization techniques were used to measure the performance and to check the applicability. Results are as follows: (1) for simple calculations such as Growing Degree Days accumulation, the time required for Input and Output (I/O) is significantly greater than that for calculation, suggesting the need of a technique which reduces disk I/O bottlenecks; (2) when there are many I/O, it is advantageous to distribute them on several servers. However, each server must have a cache for input data so that it does not compete for the same resource; and (3) GPU-based parallel processing method is most suitable for models such as PRISM with large computation loads.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.77-84
• /
• 2012

Purpose: To develop a geometrical quality control real-time analysis program using an electronic portal imaging to replace film evaluation method. Materials and Methods: A geometrical quality control item was established with the Eclipse treatment planning system (Version 8.1, Varian, USA) after the Electronic Portal Imaging Device (EPID) took care of the problems occurring from the fixed substructure of the linear accelerator (CL-iX, Varian, USA). Electronic portal image (single exposure before plan) was created at the treatment room's 4DTC (Version 10.2, Varian, USA) and a beam was irradiated in accordance with each item. The gaining the entire electronic portal imaging at the Off-line review and was evaluated by a self-developed geometrical quality control real-time analysis program. As for evaluation methods, the intra-fraction error was analyzed by executing 5 times in a row under identical conditions and procedures on the same day, and in order to confirm the infer-fraction error, it was executed for 10 days under identical conditions of all procedures and was compared with the film evaluation method using an Iso-align$^{TM}$ quality control device. Measurement and analysis time was measured by sorting the time into from the device setup to data achievement and the time amount after the time until the completion of analysis and the convenience of the users and execution processes were compared. Results: The intra-fraction error values for each average 0.1, 0.2, 0.3, 0.2 mm at light-radiation field coincidence, collimator rotation axis, couch rotation axis and gantry rotation axis. By checking the infer-fraction error through 10 days of continuous quality control, the error values obtained were average 1.7, 1.4, 0.7, 1.1 mm for each item. Also, the measurement times were average 36 minutes, 15 minutes for the film evaluation method and electronic portal imaging system, and the analysis times were average 30 minutes, 22 minutes. Conclusion: When conducting a geometrical quality control using an electronic portal imaging, it was found that it is efficient as a quality control tool. It not only reduces costs through not using films, but also reduces the measurement and analysis time which enhances user convenience and can improve the execution process by leaving out film developing procedures etc. Also, images done with evaluation from the self-developed geometrical quality control real-time analysis program, data processing is capable which supports the storage of information.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.67-80
• /
• 2015

Although recent policies and regulations in Korea strongly advocate and encourage cultivation of venture foundations, studies on venture foundation and success are very limited and often primarily focus on entrepreneurship or individual quality as a venture founder in addition to such studies' validity in question. Therefore, this study primarily focuses on venture preparation process which is subject to venture founder's effort to verify the policy effectiveness in the relationship between venture preparation and business performance. Major goal of this study is to reduce social cost of venture failure by suggesting systematic policy support for venture foundations and analyzing the relationship between following variables: first, venture preparation and financial performance, second, venture preparation and non-financial performance, and third, venture preparation and business performance. 400 initial venture foundations less than 5 years are selected from KISED(Korea Institute Startup & Entrepreneurship Development) trend analysis to carry out statistical analysis using SPSS 18.0. To organize the data features, frequency analysis as well as descriptive statistics are performed to verify the hypothesis. As a result, sub-factors in measurement of venture preparation which are venture education period, venture benefit, and experience of incubating organization are selected as independent variables. Likewise, sub-factors in measurement of business performance which are financial performance and non-financial performance are used as dependent variables. To validate interactive effect, venture preparation period is selected as control variable to perform hierarchical regression analysis. The analysis result verifies that venture benefit has positive influence on financial and non-financial performance while venture education period has positive influence on non-financial influence and experience of incubating organization has negative influence on non-financial performance without influence on financial performance. In addition, interaction of venture preparation period has positive influence solely between venture benefit and non-financial performance. Through this study, appropriate supporting plans depending on the level of venture preparation can be derived to improve business performance of initial venture foundations for policy designer of venture support, and quality rather than quality improvement of venture businesses is possible through investigation of structural issues of individual venture businesses. Ultimately, this study suggests venture founders to determine whether to focus on venture preparation process or to start a venture business.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.14-28
• /
• 2017

Mt. Seunghak's Miscanthus sinensis community is not only a landscape resource in terms of cultural services within the Ecosystem Services but also a site that is visited by many mountaineers in autumn. As the current Miscanthus sinensis community has been experiencing a rapid decline due to Korean forest succession characteristics, ongoing artificial management is thought to be needed for landscape resource use. The purpose of this study was to determine growth environment characteristics and the cause of the rapid decline of the Miscanthus sinensis community in Mt. Seunghak, which is located inside a large city with a large scale and outstanding accessibility. As the Miscanthus sinensis community is the representative early vegetation that appears temporarily in dry, barren soil, the Miscanthus sinensis community in Korean forest succession tends to be unsustainable. As the current soil on Mt. Seunghak is inappropriately fertile for the Miscanthus sinensis community, other wetland woody plant communities are anticipated to succeed it. If Miscanthus sinensis community maintenance is needed for Miscanthus sinensis landscape scenery, various alternatives apart from overall Miscanthus sinensis community maintenance should be determined for cost-effective management. For example, while many byways toward the inside of the Miscanthus sinensis community have affected the Miscanthus sinensis community growth environment, the installation of wooden fences and ropes has been a control in approach. As a result of this positive effect, many byways toward the inside of Miscanthus sinensis community have been restored naturally. Through viewable range analysis, as good scenery sites on the observatory have a good viewable range on the main trail as well, if these scenery sites are intensively managed, effective Miscanthus sinensis ccommunity management will be done despite maintenance budget cutbacks. This study is expected to be used as a basic material regarding the alternatives for a sustained Miscanthus sinensis community and the possibility of cultivating other growth in poor soils of fallow fields and unused land.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2008

Ad-Hoc network is a network architecture which has no backbone network and is deployed temporarily and rapidly in emergency or war without fixed mobile infrastructures. All communications between network entities are carried in ad-hoc networks over the wireless medium. Due to the radio communications being extremely vulnerable to propagation impairments, connectivity between network nodes is not guaranteed. Therefore, many new algorithms have been studied recently. This study proposes the secondary header approach to the cluster based routing protocol (CBRP). The primary header becomes abnormal status so that the primary header can not participate in the communications between network entities, the secondary header immediately replaces the primary header without selecting process of the new primary header. This improves the routing interruption problem that occurs when a header is moving out from a cluster or in the abnormal status. The performances of proposed algorithm ACBRP(Advanced Cluster Based Routing Protocol) are compared with CBRP. The cost of the primary header reelection of ACBRP is simulated. And results are presented in order to show the effectiveness of the algorithm.

• Spatial Information Research
• /
• v.6 no.2
• /
• pp.133-152
• /
• 1998

This article considers the experimental foundations of geographical phenomena for the distribution of lodging houses and the development of lodging Information Systems in Shin-Chon Area. This system allows the rural students to find their lodging houses conveniently. We examine the geographical reality of lodging houses in Shin-chon area and explores the lodging information system, reflecting how students select the lodging houses. Criteria for selection of lodging houses are travel time to school, interior facilities, rent fee, members, owners of lodging houses, which are collected by field swvey. The lodging information system is built in integration of Visual Basic with spatial data which are created in Mapinfo and Arcview through MapObject, component GIS software. This system provide query tools to efficiently investigate data as well as interactive map display. Also it displays the characteristics of a selected lodging houses using the identify tool on the map.