• Journal of Korea Multimedia Society
• /
• v.3 no.1
• /
• pp.63-76
• /
• 2000

Most work done in CSCW (Computer Supported Collaborative Work) system has been targeted toward supporting the exchange of documents or messages among group members, and yet support for cognitive aspects such as group organization, division and merge of work, and work flow control. The objective of the study is to provide CSCW environment for the engineering design process such as CAD (Computer Aided Design) and CASE (Computer Aided Software Engineering). The proposed DCWA (Distributed Collaborative Writing Aid) system suggests a mechanism that unifies the group organization, work division, and work flow control in the CAO, CASE, and software simulation tool. In particular, CAD relates the group and work partition by providing expressing the relation of drawing object (e.g., binding, attachment, and proportional scaling) which is owned by different members of group, and CASE combining with the simulation tool supports the flexibility of the work flow control. Simulating the prototype before manu-facturing a product can reduce time and cost in development.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.288-293
• /
• 2010

This paper presents to calculate the lethality of missile for the simulation test program and to verify the simulation results. In order to calculate a reliable lethality we need may data and experiments of fuse and warhead, but in reality it is hard to perform a task. Therefore, this paper obtained from the reference paper to analyze the lethality data for the calculation of the lethality. We form the 6 DOF simulation model using the MATLAB/SIMULINK. And formed the autopilot algorithm using the vertical and horizontal acceleration feedback and PNG (Proportional Navigation Guidance) command be used to the guidance algorithm. Finally, we evaluate the results about three cases, front launch, side launch and rear launch to simulate the simulation program, and the target is designed to have a constant speed and direction.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.315-318
• /
• 2007

A dynamic simulation of a turbo-shaft engine was performed for analysis of transient-state and engine-starting characteristics using the MATLAB/SIMULINKTM. The turbo-shaft engine was modelled based on thermodynamic and rotor dynamic relations. The analysis of engine starting characteristics was performed by monitoring the rate of the pressure, temperature and mechanical torque changes along the engine stations by the torque input generated from the accessary power unit and transmitted to the power turbine. The simulation of the transient-state characteristics of the engine was performed under fuel flow rate increase from the steady-state condition. For the future study, engine control unit will be added to the basic turbo-shaft engine model to enhance capability of engine performance simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.97-104
• /
• 2018

In the conventional direction finding, the antenna is installed at a high position on the ground to detect the position of the target with the environment of the LOS(Line of Sight) as much as the signal receiving environment. However, in order to configure such environment, high cost and installation time were required. In this paper, we use TDOA(Time Difference of Arrival) technique to utilize drones in direction finding, so that four drones can be used for directions finding simulation. Simulations based on drone and TDOA direction finding were constructed using additional signal processing Taylor series and Exact Interactive Algorithm. In the simulation, the receiving power is defined by using the 800MHz path-loss model using the GPS information of the ground direction detection, and the position estimation performance is analyzed when the TDOA technique, the Taylor series, and the Exact Interactive Alogrithm are applied.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.29-34
• /
• 2016

Many researchers have used cohort DB (database) to predict the occurrence of disease or to keep track of disease spread. Cohort DB is Big Data which has simply stored disease and health information as separated DB table sets. To measure the relations between health information, It is necessary to reconstruct cohort DB which follows research purpose. In this paper, XML descriptor, editor has been used to construct ontology-based Big Data cohort DB. Also, we have developed ontology based cohort DB search system to check results of relations between health information. XML editor has used 7 layered Ontology development 101 and OWL API to change cohort DB into ontology-based. Ontology-based cohort DB system can measure the relation of disease and health information and can be used effectively when semantic relations are found. We have developed ontology-based cohort DB search system which can measure the relations between disease and health information. And it is very effective when searched results are semantic relations.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.335-345
• /
• 2017

It is necessary for an instructor to understand the student's team building behavior for an effective guidance of team activities. In this study, we developed an agent-based computational model for simulating the student's self-controlled behavior. We validated the model by comparing the actual behavior. Through the simulation, we found that the time to stabilization of team formation and the ratio of the students having no team are decreasing as the population of the student increases. However, we also found that over a certain amount of population, the time and the ratio do not show much progress in the difference. The simulation also shows that the more heterogeneity between the students the higher chance of delaying the team formation and increasing the ratio. We expect to use the model as a tool for guiding and supporting students' team activities.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1994.10a
• /
• pp.7-8
• /
• 1994

최근 들어 원자재, 재공품 또는 완제품을 신속하고 정확하게 공급/배분하기 위해 저장과 인출을 담당하는 Material Handling System을 이용하여 작업자의 개입요소를 줄이며, 제고관리 Computer를 이용하여 입고/출고 명령을 유효적절하게 처리하는 ASRS(Atomated Storage and Retreival System : 자동창고 시스템)가 널리 공급되고 있다. 중앙은행의 현금창고, 병원의 약품창고, 식품/화장품 회사의 배송창고, 군수물자의 군납창고에 이르기까지 물품의 저장 또는 공급의 필용성을 갖는 곳에서는 어디든지 찾아볼 수 있는 ASRS는 가깝게는 관공소나 대형빌딩의 주차장에도 이의 개념이 도입되어 사용됨을 볼 수 있다. 최근의 인금인상, 구인난등의 이유로 ASRS설치는 계속 증가할 추세에 있으나 자동 창고 시스템을 설치하기 위해서는 막대한 초기 투자가 필요하며 시스템의 설계 및 설치후 운영에 대한 연구가 반드시 필요하다. ASRS의 운영 Rule 검증, 수행능력 분석등의 목적을 갖는 연구에는 여러 접근방법이 있을 수 있으나 구성 설비와 운영 Rule의 복잡한 관계로 컴퓨터 시뮬레이션의 거의 유일한 문제해결 방법이다. ASRS의 Modeling에 관한 기존의 연구로는 수리모델 수립. 이산사건 시스템의 관점에서 event-graphy, petri-net을 이용한 modeling이 있으며 ASRS에 대한 전용 Simulator 개발등이 진행되었다. 본 연구의 대상 시스템은 2개의 Rack과 하나의 Stacker Crane 으로 구성된 Aisle과 입출고의 물류를 처리하는 순환 RGVS(Rail Guided Vehicle System), 입/출고장을 구성하는 Conveyor Net등으로 이루어진 제조-물류시스템의 일반적인 ASRS이다. 또 이 ASRS의 입/출고 방식은 전수 입/출고만을 포함하며 Blocking 방지를 위한 Capaicty 예약, 다중설비 선택등의 문제등을 고려하고 있다. 본 연구의 접근방법으로는 ASRS의 개념적인 Reference Model을 수립하고 이 Reference Model에 대한 Formal Model로 DEVS(Discrete Event System Specification)을 이용하여 시스템을 Modeling하였다. 이의 Computer Simulation을 위하여 DEVS형식론 환경에서의 Simulation Language인 DEVSim ++ⓒ를 이용하여 시스템을 구현하였다.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.131-137
• /
• 2019

The operation of the precision-guided missiles with seekers is becoming more and more dominant since the modern wars became geographically localized like anti-terror campaigns and civil wars. Imaging seekers are relatively low-price and applicable to various operational conditions. The image tracker, however, requires highly advanced method for the target tracking under harsh missile flight condition. Missile roll can reduce the tracking performance since it introduces big differences in imagery. The missile roll is inevitable because of the disturbance and flight control error. Consequently, the errors of the subsystems should be under control for the stable performance of the tracker and the whole system. But the performance prediction by some simple metric is almost impossible since the target signature and the tracker are highly nonlinear. We established M&S tool for a precision-guided missile with imaging seeker and analyzed the roll effects to tracking and system performance. Furthermore, we defined the specification of missile subsystems through error analysis to guarantee system performance.

• Journal of the Korea Society for Simulation
• /
• v.22 no.3
• /
• pp.25-33
• /
• 2013

The research focuses on the method to improve the Logistics considering investigating the present state of the fast growing social commerce. The improving Logistics is the jointed transport system, which proposes the concept of the packaged delivery for customers in same area and the condition-specific benefits as the transport cost and delay period. Customers in this system will obtain the advantage as the decrease of transport cost and social commerce companies will make the effect about growing the number of customer and the sales by the lowest price in the online markets. There are 7 scenarios for simulation. The performance assessment of the results from simulation is carried out by total number of orders, finished number of orders, sales, delivery times, delivery cost, earlier rate of delivery, and fluctuation of number of wrong delivery. The results of the research show that the total number of orders, finished number of orders and sales are increased, while the times and cost of delivery are decreased.

• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.87-95
• /
• 2006

We need to check into when a security system is newly developed, we against cyber attack which is expected in real network. However it is impossible to check it under the environment of a large-scale distributive network. So it is need to simulate it under the virtual network environment. SSFNet is a event-driven simulator which can be represent a large-scale network. Unfortunately, it doesn't have the module to simulate security functions. In this paper, we added the IDS module to SSFNet. We implement the IDS module by modeling a key functions of Snort. In addition, we developed some useful functions using Java language which can manipulate easily a packet for network simulation. Finally, we performed the simulation to verify the function if our developed IDS and Packets Manipulation. The simulation shows that our expanded SSFNet can be used to further large-scale security system simulator.