• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.101-106
• /
• 2006

In this study, the impedance behavior of micro-speaker had been investigated as a function of hole area existing on the grille. In order to theoretically study the change of acoustical property due to the different total hole area, the holes were treated as a short open pipe system, such as an orifice. This theoretical result was in an excellent agreement with the experimental one. In detail, the acoustic impedance to be caused by the hole could be greatly increased with the decrease of hole area. Therefore, it can be concluded that the acoustic property of micro-speaker could be greatly changed by increasing the acoustic impedance of hole with reducing hole area.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.491-498
• /
• 2016

Stress on plates may increase in the neighborhood the edges or the holes for rivets or bolts. Excessive stress concentration may lead to severe breakage of the plates. Thus, it is important to conduct optimization of arrangement of holes at the design stage. In this paper, accuracy of FEM analysis was examined for such stress concentration. By changing the hole size on a narrow plate, change of the stress concentration factor(K) was investigated. Additionally, the same experiment was conducted about series of multiple holes on plate to investigate interaction between the adjacent holes. Then, the FEM results were compared to the reference predictions respectively. Finally, a method by which simple stress concentrating situations can be optimized, will be suggested. This method was examined by FEM, and showed similar tendency with the expectation. Therefore, this method can be valuable when arranging the holes on a plate.

• Publications of The Korean Astronomical Society
• /
• v.6 no.1
• /
• pp.27-37
• /
• 1991

두 스칼라장 $\phi_1$, $\phi_2$를 사용한 원시 검은 구멍 생성모형을 살펴보았다. $\phi_1$은 Linde의 혼돈 인플레이션장을, 그리고 $\phi_2$는 SU(5) 대통일 이론의 Higgs장을 사용하였다. 인플레이션은 $\phi_1$에 의해서 일어난다고 가정하였는데, 재가열(reheating) 온도가 $\phi_2$장의 임계온도(${\sim}1.31{\times}10^{14}GeV$)보다 높을 경우 재가열 직후에 검은 구멍이 생성됨을 알 수 있었다. 재가열 온도가 $1.48{\times}10^{14}GeV$정도 되면, 질량이 1kg쯤인 검은 구멍이 생성되는데, 현재의 지평선에 해당되는 당시의 영역 내에서 생성되었던 검은 구멍들의 총 질량이 ${\sim}10^{55}g$($\approx$현재 우주의 지평선 질량)이 되어, 그 증발과정이 우주론적으로 중요해질 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.243-254
• /
• 2020

Korean traditional kite has the unusual shape of the elongated rectangle with the center hole. The aerodynamic forces are numerically computed on Korean traditional kite with aspect ratio 1:1.5 by using FLUENT software. Simulating the flight of the kite with various diameters of the center hole, the present study has investigated the role of the center hole as well as the effect of diameter of the center hole. The center hole plays a role in relieving the sudden increase of tension associated with fast rewinding of the kite thread in kite fighting, thereby enabling faster rewinding of the kite thread. The proper diameter of the center hole is 1/3 of the width.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.419-428
• /
• 2011

This study was conducted to test the efficacy of Ulva pertusa kjellman as immunomodulators under lipopolysaccharide (LPS) challenge in broilers by investigating their effects on serum superoxide dismutase (SOD) like ability, immunoglobulin concentration, and splenic cytokine mRNA expression. A total of ninety six1-d-old male broiler chicks (Ross 308) were divided into 4 treatment groups with 8 replicates of 3 birds in each group. NC (negative control, no immune substances), PC (positive control, ${\beta}$-glucan 25 ppm), Ulva P (Ulva pertusa kjellman Powder 3%), and Ulva E (Extract form Ulva pertusa kjellman 0.3%) were added in feed with respective substance. Heparinized venous blood and spleens were collected from five birds per dietary treatment at 5 wk of age. The SOD like activities in Ulva P and Ulva E were significantly increased in comparison with other groups (P<0.05). The immunoglobulin M content was lower in the Ulva E than other groups (P<0.05). Expression patterns of splenic cytokine mRNA in the IL-$1{\beeta}$, IL-2 and IL-6 were similar. Expression rate of IL-$1{\beta}$, IL-2 and IL-6 in Ulva pertusa kjellman (Ulva P, Ulva E) were decreased (P<0.05) in comparison to other groups. Expression rate of IL-$1{\beta}$, IL-2 and IL-6 were significantly lower in groups treated with Ulva E than Ulva P. In conclusion, dietary supplementation of Ulva pertusa kjellman improved SOD like activity and affect immune system by inhibiting inflammatory response in broiler chicks. In addition, it is more effective to use Ulva pertusa kjellman extract than powder for immunomodulatory function. These results suggest the possibility that Ulva pertusa kjellman could be used as the immunomodulator for inflammatory response in broiler chicks.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.721-726
• /
• 1995

사용후핵연료 중간저장 시설의 누수사고시 예상되는 SFLFL 컴퓨터 코드 분석 결과에 따른 실제 피복관의 산화시험 결과 저장용기 밑바닥 세가지 구멍은 크긴 조건들에 대히 환기회수가 시간당 0회인 경우는 사고후 48시간 경과시 매우 심각한 산화가 예상되며, 나머지 조건의 경우에는 48시간 산화 후 최대 산화량이 90mg/dm$^2$으로 시설의 누수사고시 산화막에 의한 영향은 거의 무시 할 수 있는 것으로 나타난다. 9가지의 시험조건중 안전성은 구멍의 크기가 7.62cm, 환기수가 시간당 2회인 경우가 가장 놓으며. 두번째는 구멍의 크기가 5.08cm, 시간당 환기수 2회의 경우였다. 같은 환기회수의 경우 구멍의 크기가 5.08과 7.62cm인 경우는 비슷하게 나타나지만 2.54와 5.08cm의 경우는 큰 차이를 보인다. 여기에서 수행된 시험은 미조사, 미전처리 시편을 사용한 것이므로 실제로 조사 및 로내 산화막이 입혀진 시편에 대한 추후 시험이 요구된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.147-152
• /
• 1992

본 연구에서는 같은 직경의 2개 원형구멍이 동축상에 있는 4변고정, 등반성 정사각형판의 자유진동특성을 충격진동실험과 유한요소 해서방법으로 원형 구멍직경의 변화에 다른 고유진동수와 무차원 진동수 매개변수를 구하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.548-550
• /
• 2000

본 논문은 재구성 가능한 메쉬(RMESH) 병렬 모델에서 상수 시간에 구멍이 있는 다각형의 한 점으로부터의 가시성 다각형을 구하는 문제를 고려한다. 알고리즘의 기본 전략은 프로세서의 수에 있어 준-최적인 상수 시간 알고리즘을 사용하여 문제의 크기를 감소시킴으로써 최적인 상수 시간 알고리즘을 얻는 것이다. 이 전략을 사용해 모두 N개의 에지로 구성된 구멍이 있는 다각형에 대한 가시성 다각형을 N$\times$N RMESH에서 상수 시간에 구하는 알고리즘을 제시한다. 이 알고리즘은 다각형들의 집합이 주어져 있을 때 외부의 한 점에서 가시 영역을 구하거나, 선분들의 집합이 주어져 있을 때 평면상의 한 점에서 가시 영역을 구하는 문제도 해결할 수 있다.

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.151-158
• /
• 2018

The intervertebral foramen is formed by two adjacent vertebrae and an intervertebral disc. Previous studies examining the foramen have been performed using various methods. The author obtained characteristics of the intervertebral foramen based on silicon mold. The author used 18 cadavers and dissected the lumbar intervertebral foramen. First, positional levels of the spinal nerve in the intervertebral foramen were measured. Second, after being removed all tissues covering the intervertebral, bony foramen was filled with melted silicon to mold the cross section. Subsequently, the solidified silicon mold was removed and stamped on a paper. The paper was scanned and analyzed area, perimeter, height and width of the intervertebral foramen on a computer. Area (average, $9.43mm^2$) and perimeter (average, 48.02 mm) did not show any statistical significant pattern for any lumbar vertebral levels. However, the height and width significantly differed at the fifth lumbar vertebra, which had the shortest height (the fifth, 13.00 mm; average, 15.78 mm) and longest width (the fifth, 8.61 mm; average, 7.87 mm), although there were similar patterns in case of area and perimeter of the first to fourth lumbar vertebra. Height had a decrease tendency while width had an increase tendency both from the second to fifth lumbar vertebra. Spinal nerves went through near the intervertebral disc level from the first to fourth lumbar vertebra, although they passed below the disc at the fifth level. This study provides a different view of methodology for the 3-dimensional aspect for the intervertebral foramen. Results of this study may indicate that height and width of the intervertebral foramen changed along all lumbar vertebral levels; nevertheless, area and perimeter of the intervertebral foramen remained constant.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.411-419
• /
• 2017

Stress concentration is one of the causes of the damage due to the large stress than the mean stress acting on the bar. This paper presents the results for stress of a stepped bar with a hole under torsional loading. The analysis for stress concentration and shearing stress was done by ANSYS Workbench which is a commercial finite element analysis software. The analysis results on fillet and hole are increased as the distance between them are become close. In addition, the distribution of the maximum equivalent stress developed in the fillet and hole in the outside range of the specific distance L (-100 mm ~ 300 mm) was almost constant in the models used in the analysis. On the other hand, the distribution of the maximum equivalent stress developed in the fillet and hole in the inside range of the specific distance L (-100 mm ~ 300 mm) was rapidly increasing and decreasing the change in the models used in the analysis. In addition, it was also possible to identify the location where the differences between equivalent stresses of hole and fillet occurred within a specific distance L (-100 mm ~ 300 mm). The analysis results of paper can used when selecting a hole location in a stepped bar under torsional loading.