• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.15-30
• /
• 1996

저작은 치아, 악골, 저작근 뿐만 아니라 근 신경계, 고위 중추까지 복합적으로 관여되는 기능적 행위이다. 저작 형태는 다양한 모양을 가지나 두 가지 전형적인 군, 즉, 전방에서 관찰 시 그 양상이 수직적이며 절단 (chopping) 운동을 하는 군과 주로 측방으로 이루어지며 연마 (grinding)를 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 차이가 교합면 마모에 미치는 영향을 조사하는 것이다. 두개 하악 관절과 저작 습관에 이상이 없으며 교합면에 수복물이 없는 치과 대학생으로 하악 운동 궤적 기록기를 이용하여 상기의 전형적인 2가지 저작 형태를 보이는 각 15명씩을 피검자로 선택하였다. 각 피검자에 대한 임상 검사를 통해 ordinal scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하였다. 각 피검자에 대한 인상 채득 후 모형을 제작하고 arbitrary scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하고 저작측과 비저작측 마모를 비교 조사하였으며 수평 마모면과 수직 마모면을 비교 조사하였다. 1. 평균 치아 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 2. 부위에 따른 치아의 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 3. 평균 치아 마모도는 arbitrary scale로 측정하였을 때, 절단형에 비교하여 연마형에서 높은 마모도를 보였다.(p<0.05). 4. 절단형에 비교하여 연마형은 arbitrary scale로 측정하였을 때, 구치부에서는 높은 마모도를 보였으며 전치부에서는 유의할 만한 차이가 없었다(p<0.05) 5. 구치 평균 치아 마모도와 부위에 따른 치아의 마모도는 균형측에서 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다(p>0.05). 6. 전치 평균 치아 마모도와 부위에 따른 치아의 마모도는 수평 마모면과 수직 마모면 비교시, 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다.(p>0.05)

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.328-334
• /
• 2020

Clinical remounting of complete denture is performed to refine occlusal harmony in maxillo-mandibular relation. It has been reported that patients who used adjusted dentures with clinical remounting felt less complications such as pain and discomfort in mastication. The purpose of this study was to assess effects of clinical remounting with case series. Seven patients with existing complete prosthesis were included. Clinical remounting procedure was done through interocclusal relation recording. In addition, occlusal force was measured with pressure indicating sensor and occlusal contact areas were evaluated with photo occlusion analysis. Occlusal contact areas of prosthesis were enlarged, while bite pressure was not increased. Hit and slide phenomenon of prosthesis was reduced concurrently. Clinical remounting procedure improved denture stability and increased occlusal contact area. Therefore, clinical remounting should be considered.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.157-168
• /
• 2010

Many athletes have been using occlusal stabilization appliances to improve their performance. Few studies have examined the benefits of such an appliance in golf. We determined the effect of such appliances on the masticatory muscle activities and driving distances of professional golf players. The appliances were customized for each player and adjusted using a computerized device. The electromyographic muscle activities and driving distances with and without the appliance were measured and compared using the K7 Analyzer and the GolfAchiever II assembly. A paired t-test was used for statistical analysis. The muscle activities of the temporo-frontal and masseter muscles with the appliance were significantly more stable than those without the appliance, and the driving distances with the appliance were significantly different from those without it. Although there were intra-individual differences, professional golf players with temporomandibular disorders showed a greater improvement in performance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.44-54
• /
• 2023

In order to manufacture functional and esthetic prostheses, it is essential to accurately transmit information about the patient's occlusal plane. In particular, in the case of a completely edentulous patient, the occlusal plane is very important to correctly support the soft tissue, to achieve aesthetic harmony with the facial appearance, and to properly pronounce it, and to form a balanced occlusal relationship for stable mastication. In the conventional method, various facebow systems were used to transmit patient's information from the clinic to the laboratory, but there were several limitations in the process of transferring them to CAD. To simplify this process, a prefabricated POP (PNUD Occlusal Plane) Bow system was recently developed. In this case, a CAD-CAM (Computer-aided design-computer-aided manufacturing) treatment dentures reflecting the patient's occlusal plane information was manufactured using the POP Bow system during the treatment of a completely edentulous patient, and aesthetic and functional satisfaction was obtained.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.311-321
• /
• 1995

This study was undertaken to investigate the distribution of the chewing side preference and variations in the maximum bite force and facial morphology according to chewing side preference since unilateral chewing may cause morphologic and functional anomalies. 50 dental students who had no signs or symptoms of masticatory system and Angle's Class I relationship in posterior segments were selected, and divided into two groups, that is, 25 in bilateral chewing group(19 male and 6 female) and 25 in unilateral chewing group(10 male and 15 female). Maximum bite force was estimated ana posteroanterior cephalogram were measured ana statistically analyzed. The results were as follows : 1. Their were more students with bilateral chewing side preference($68\%$) and unilateral chewing side group consisted of right side preference($68\%$) and left side preference($32\%$). 2. There was no significant difference in the strength of max. bite force between the right and left side in bilateral chewing group. The bite force of the chewing side nab greater in the unilateral chewing group but less in the non-chewing side compared to those of bilateral chewing group with Bo significant difference. Max. bite force of chewing side was greater than that of non-chewing side in the unilateral chewing group(Female p<0.05). Max. bite force of males was about twice in that of females in both groups(p<0.05). Max. bite force of chewing side of the unilateral chewing group was similar to that of the bilateral chewing group, but that of non-chewing side was less than that of the bilateral chewing group. 3. In comparison of the facial morphology, there was no statistically significant difference in the size between the right and left side of the bilateral chewing group and between chewing and non-chewing side of the unilateral chewing group.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.28-31
• /
• 2022

위에서 살펴본 바와 같이 나는 급성 턱관절장애의 경우, 첫번째 유형은 주로 턱관절 디스크공간의 문제와 하악의 위치를 바로잡아주는 근육의 문제가 주 원인일 것으로 추정하고 있다. 만약 턱관절 디스크공간이 정상공간이라면 턱의 지그재그 움직임이나 턱관절잡음, 턱통증, 턱탈구, 그리고 개구장애 등이 발생할 수 없기 때문이다. 그리고 근육의 문제 중에서는 턱관절 디스크원판을 양측에서 잡아주는 내외측 익돌근의 문제가 가장 많은 영향을 미치고 있다. 특히 내측 익돌근의 긴장 및 수축이 디스크 원판을 내측으로 빠져나가게 함으로써 하악의 좌우 지그재그 움직임을 야기시키고 턱관절잡음이나 턱통증 및 개구장애를 유발하기 때문이다. 나머지는 저작에 관여하는 근육들이 그 다음으로 영향을 미치는 것으로 예측하고 있다. 그러나 제2형 급성 턱관절장애의 경우는 제1형 급성 턱관절장애가 한단계 더 발전하여 이와 연관된 근육이나 인대의 긴장수축이 오랜 시간 진행되어, 이들이 다시 상부 경추의 아탈구와 두개골의 비정상적 움직임에까지 영향을 미쳐 나타나는 것으로 생각된다. 그렇게 되면 뇌에서 필요 충분한 뇌혈액공급이나 뇌척수액순환의 문제를 일으킬 수 있기 때문이다. 그리고 제1형 만성 턱관절장애의 경우는 제2형 급성 턱관절장애가 좀 더 진행되면서 척추 및 근골격계의 구조변화, 교합 및 턱의 구조변화 그리고 안면구조의 변화에 이르기까지 점점 진행되어 나타나는 것으로 보인다. 따라서 각종 척추 디스크질환, 관절질환을 비롯해서 두개천골계의 순환문제, 부정교합 및 턱 비대칭, 안면 비대칭의 문제를 유발하게 된다고 추정된다. 그러나 두번째 유형의 만성 턱관절장애는, 턱에서 지속적이고 반복적인 그리고 과다한 부정적 자극들이 오랜 기간 누적되면서 턱에 분포된 C 섬유를 비롯한 3차신경의 가소성변화를 유발하면서 결국 중추신경계를 포함하여 전체신경계의 회로망에까지 파급되어 다양한 만성질환 또는 난치성 질환들이 양산되는 것으로 추정하고 있다. 아마도 지금까지 서양의학에서 아직 밝혀내지 못한 대부분의 질병들이 여기에 포함되지 않을까 하는 것이 나의 생각이다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.101-108
• /
• 2005

Children are in mixed dentition during 6 years after 3 years old. this time is very important for sound permanent dentition. There are many factors of influence to tooth eruption stage ; adjacent teeth, tooth resorption, early loss or retention of deciduous tooth, local lesion, lip and tongue, masticatory muscles, ect. These factors should be in balance, if not, relation of adjacent teeth is changed, then severe malocclusion is occurred maybe. These cases revealed influences of resin bonded metal splint on occlusal surface of children's molar to mixed dentition. Splints interfere with falling off of deciduous tooth, tooth eruption, normal occlusion formation, and development of mixed dentition and occlusion. Therefore we removed the metal splint from teeth, follow-up checked occlusion and tooth eruption.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.197-203
• /
• 2004

Tweed-Merrifield directional force technology is a very useful concept, especially for the treatment of Glass II malocclusion. It has contributed to treating a favorable counter-clockwise skeletal change and balanced face, while head gear force using high pull J-hook (HPJH) in an appropriate direction is also essential to influence such results. Clinicians have encountered some problems concerning patients' compliance; however skeletal anchorage has been used widely of late because it does not necessitate patients' compliance, yet produces absolute anchorage. In this case, a good facial balance was obtained by Tweed-Merrifield directional force technology using HPJH together with skeletal anchorage, which provided anchorage control in the maxillary posterior area, torque control in the maxillary anterior area, and mandibular response. This indicates 4hat skeletal anchorage can be used to reinforce sagittal and vortical anchorage in the maxillary posterior area during the retraction of anterior teeth. The author used HPJH for torque control, Intrusion, and the bodily movement of maxillary anterior teeth during on masse movement. However, it is thought that such a result nay also be achieved by substituting mini- or microscrews for HPJH. Consequently, Tweed-Merrifield directional force technology using skeletal anchorage for the treatment of Class II malocclusion not only maximiaes the result of treatment but can also minimize patients' compliance.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.431-436
• /
• 2009

In a case of class III skeletal patients with severe alveolar bone resorption, it must be a complete denture treatment plan provided stable and durable occlusion. Despite a markedly increased tooth mobility and unfavorable crown-to-root ration due to periodontal tissue breakdown, if the inflammatory process is controlled and an adequate oral hygiene performed, fixed splints will be considered. Patient's discomfort will be eliminated by achievement better clinical tooth mobility using fixed splints. So it can be a cost and time effective treatment option. In this case, it used a T-Scan System for confirmation a bilateral balanced occlusion and a occlusal force distribution reflected a patient's functional mandibular movement.

• Journal of TMJ Balancing Medicine
• /
• v.9 no.1
• /
• pp.4-11
• /
• 2019

Objectives: Although intraoral balancing appliance therapy has been used effective to several diseases, verification studies through cerebral diseases are poorly reported so far. Thus we investigated the effect of tooth-cut induced dental malocclusion against mouse model of ischemic stroke. Methods: Tooth-cut and 90 min middle cerebral artery occlusion (MCAO) were loaded to C57BL/6 male mice, and total infarct area, neurological deficit scores (NDS), histological change of hippocampal region were observed. Production levels of reactive oxygen species (ROS) and inducible nitric oxide synthase (iNOS) in cerebral tissue were also measured. Results: The longer the tooth-cut period, the greater the area of cerebral infarction caused by MCAO, and NDS began to increase as the tooth was cut, and the results were more negative when MCAO was loaded. Histological change of hippocampal cells was significant when tooth-cut was maintained for 7 days. Those damages were thought to depend on the generation of ROS and iNOS in brain tissue. Conclusions: Since tooth-cut increased total area of cerebral infarction due to MCAO in mice, it is able to be confirmed that anomaly of the temporomandibular occlusion can affect neurological diseases.