• Title/Summary/Keyword: 교통저항

Search Result 137, Processing Time 0.021 seconds

Snubber Resistor Optimization by Frequency Domain Analyze for PSFB Converter (주파수 해석을 통한 PSFB 컨버터 스너버 저항 최적설계 기법)

  • Ko, Jae Hak;Oh, Seung Min;Kim, Hag-Wone;Cho, Kwan-Yuhl
    • Proceedings of the KIPE Conference
    • /
    • 2018.11a
    • /
    • pp.80-82
    • /
    • 2018
  • 위상천이 풀-브릿지 컨버터(PSFB converter)는 다양한 전원장치에 응용되고 있다. 하지만 2차측에 링잉(ringing)현상이 생겨 다이오드에 과도한 전압 스트레스를 유발하는 문제가 있다. 링잉 현상을 억제하기 위해 스너버 회로를 추가하여 사용해야 하지만 저항 값에 대한 주파수응답 해석이 이루어지지 않아 스너버 튜닝에 많은 시간이 소요되었다. 본 논문에서는 저항 값에 따른 스너버 회로의 주파수 응답특성 분석을 통해 링잉으로 인한 전압 스파이크를 최소화 할 수 있는 저항 값 선정 기법을 제안하며 PSIM/Matlab 시뮬레이션으로 검증한다.

  • PDF

Buck Converter analysis and controller design considering parasitic resistance of inductor and capacitor (인덕터, 커패시터의 기생저항을 고려한 Buck Converter 해석 및 제어기 설계)

  • Lee, Kyu-Min;Kim, Il-Song
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.487-488
    • /
    • 2019
  • 본 연구는 인덕터, 커패시터의 기생저항을 고려한 Buck Converter의 회로 해석 및 Two Loop Control 방법의 제어기 설계를 제안한다. 일반적인 Buck Converter의 회로 및 제어기 설계에서는 인덕터, 커패시터의 기생저항의 값이 작아 0으로 간주한다. 본 논문에서는 인덕터와 커패시터의 기생저항을 고려한 회로를 수학적으로 해석한 뒤 Matlab SISOTOOL을 이용하여 전압 및 전류 제어기를 설계하고 PSIM을 통해 회로를 구성하여 시뮬레이션을 통해 검증함으로써 일반적인 설계보다 정확성을 가진 설계방법을 제안한다.

  • PDF

A Study on Inner Zone Trip Estimation Method in Gravity Model (중력모형에서 존내 분포통행 예측방법에 관한 연구)

  • Ryu, Yeong Geun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.5D
    • /
    • pp.763-769
    • /
    • 2006
  • Gravity Model estimates target year's distributed trips using three variables like as origin zone's trip production, destination zone's trip attraction and traffic impedance between origin zone centroid and destination zone centroid. Estimating inner zone trip by gravity model is impossible because traffic impedance of inner zone has "0" value. So till today, for estimating inner zone trips, other methods like growth factor model are used. This study proposed inner zone trip estimation method that calculates inner zone's traffic impedance using established gravity model and estimates inner zone trips by putting calculated traffic impedance into the gravity model. 1988 year's surveyed O-D as basic year's O-D, proposed method's and existing methods(growth factor method and regression model)'s estimated results of 1992 year's and 2004 year's were compared with each year's real O-D by $x^2$, RMSE, Correlation coefficient. And resulted that the proposed method is superior than other existing methods.

Transfer Impedence of Trip Chain with a Railway Mode Embedded - Using Seoul Metroplitan Transportation Card Data - (철도수단이 내재된 통행사슬의 환승저항 추정방안 - 수도권 교통카드자료를 활용하여 -)

  • Lee, Mee young;Sohn, Jhieon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.36 no.6
    • /
    • pp.1083-1091
    • /
    • 2016
  • This research uses public transportation card data to analyze the inter-regional transfer times, transfer frequencies, and transfer resistance that passengers experience during transit amongst the metropolitan public transportation modes. Currently, mode transfers between bus and rail are recorded up to five times during one transit movement by Trip Chain, facilitating greater comprehension of intermodal movements. However, lack of information on what arises during these transfers poses a problem in that it leads to an underestimation of transfer resistances on the Trip Chain. As such, a path choice model that reflects passenger movements during transit activities is created, which attains explanatory power on transfer resistance through its inclusion of transfer times and frequencies. The methodology adopted in this research is to first conceptualize the idea of metropolitan public transportation transfer, and in the case that mode transfers include the city-rail, to newly conceptualize the idea of transfer resistance using transportation card data. Also, the city-rail path choice model within the Trip Chain is constructed, with transfer time and frequency used to reevaluate transfer resistance. Further, in order to align bus and city-rail station administrative level small-zone coordinates to state and regional level mid-zone coordinates, the big node methdod is utilized. Finally, case studies on trip chains using at least one transfer onto the city-rail is used to determine the validity of the results obtained.

A schedule-based Public Transit Routing Algorithm for Finding K-shortest Paths Considering Transfer Penalties (환승 저항을 고려한 운행시간표 기반 대중교통 다중 경로 탐색 알고리즘)

  • Jeon, Inwoo;Nam, Hyunwoo;Jun, Chulmin
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.3
    • /
    • pp.72-86
    • /
    • 2018
  • Schedule-based public transit routing algorithm computes a single route that calculated minimum travel time using the departure and arrival times for each stop according to vehicle operation plan. However, additional factors such as transfer resistance and alternative route choice are not reflected in the path finding process. Therefore, this paper proposes a improved RAPTOR that reflected transfer resistance and multi-path searching. Transfer resistance is applied at the time of transfer and different values can be set according to type of transit mode. In this study, we analyzed the algorithm's before and after results compared with actual route of passengers. It is confirmed that the proposed algorithm reflects the various route selection criteria of passengers.

Development of the Algorithm of a Public Transportation Route Search Considering the Resistance Value of Traffic Safety and Environmental Index (교통안전, 환경지표의 저항값을 고려한 대중교통 경로 탐색 알고리즘 개발)

  • Kim, Eun-Ji;Lee, Seon-Ha;Cheon, Choon-Keun;Yu, Byung-Young
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.16 no.1
    • /
    • pp.78-89
    • /
    • 2017
  • This study derived the algorithm of a public transportation route search that adds safety and environmental costs according to user preference. As the means of an algorithm application and evaluation, Macro Simulation, VISUM was conducted for an analysis. The route using the subway, which is relatively low in safety and environment resistance value was preferred, and it was analyzed to select the safe and environmental route even though it detours. This study can be applicable when to verify the algorithm of route search considering safety and environment, and when introducing the algorithm of route search according to user preference in the smart-phone application in the future, it can provide users with very useful information by choosing a route as for safety and environment, and through this, the quality of user-friendly information provision can be promoted.

A Study of Transfer Impedance of KTX and Rail Stations (KTX역사 및 일반철도역사의 환승저항 산정)

  • Kim, Hye-Ran;Kim, Hwang-Bae;O, Jae-Hak;Choe, Jin-Hui
    • Journal of Korean Society of Transportation
    • /
    • v.27 no.5
    • /
    • pp.189-194
    • /
    • 2009
  • Transfer impedance is one of the most critical factors decreasing the competitive power of public transportation. Therefore, it is necessary to improve transfer impedance of KTX and rail station users in order to increase the usage of public transportation. Important factors influencing transfer decisions include exterior walking distance, interior walking distance, steps, and escalators. However, their comparative impedances are different. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in KTX and rail stations and calculated transfer impedance on major KTX and rail stations in Korea. The study results show that the addition of one escalator decreases travel time by one to three minutes. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different KTX and rail stations and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

Numerical simulation study on applicability of electrical resistivity survey at tunnel face (터널 굴착면에서의 전기비저항 탐사 적용성에 관한 수치해석 연구)

  • Yi, Myeong-Jong;Kim, Nag-Young;Lee, Sangrae;Hwang, Bumsik;Ha, Myung Jin;Kim, Ki-Seog;Cho, In-Ky;Lee, Kang-Hyun
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.24 no.3
    • /
    • pp.279-292
    • /
    • 2022
  • Unexpected anomalies in the geotechnical investigation at design stage may cause problems during tunnel excavation. Therefore, it is important to predict the ground condition ahead of a tunnel face during tunnel excavation in order to prevent tunnel collapse. Despite the fulfillment of an electrical resistivity survey at the tunnel face, the existing electrical resistivity survey program can produce distorted results by the limitation of tunnel modelling. In this background, this study develops a modelling program for an electrical resistivity survey considering the tunnel shape. Numerical simulation and inverse calculation were performed for the electrical resistivity survey in the tunnel using the developed program. As a result, it was proved that the developed program could predict accurately the anomalous object's location and condition ahead of the tunnel face.

An Evaluation of Skid Resistance Properties of Asphalt Concrete Pavement (아스팔트콘크리트 포장의 노면 미끄럼 저항성 평가)

  • Kim, Nakseok;Jeong, Haesoo
    • Journal of the Society of Disaster Information
    • /
    • v.7 no.2
    • /
    • pp.87-95
    • /
    • 2011
  • The skid resistant of pavement surface is an important parameter since it is directly related to the traffic safety under moving vehicular loads. In particular, it should be considered as a major factor in pavement performance evaluations to reduce the traffic accident from vehicular sliding. In this study, a portable and an automatic skid resistance tests were used to evaluate the skid resistances of the in-situ pavements. The test results showed that the skid resistance of the conventional dense graded pavement was more noticeable than the other pavement types such as the drainage pavement and the stone mastic asphalt(SMA) pavement as the service life of pavement was increased.

A study on the pedestrian accessibility for the general hospital buildings (종합병원건물의 보행공간 접근성에 관한 연구)

  • 서경부
    • Proceedings of the KOR-KST Conference
    • /
    • 1998.10a
    • /
    • pp.42-51
    • /
    • 1998
  • 안전한고 쾌적한 보행환경을 조성하여 보행 교통을 활성화시킨다면, 자동차의 사용이 줄게 되고 자동차의 유해한 배출가스로 인한 공기 오염 및 소음 등을 낮출 수 있을 뿐만 아니라 도심부의 미관 증대, 역사적 구역의 보존, 물리적인 도시 이미지 향상 등의 효과로 도심기능의 활성화에 기여할 수 있을 것이다. 이와 같은 보행통행의 중요성을 인식하여 안전하고 효율성 있는 보행동선을 조성할 필요가 있다. 그러나 상당수의 종합병원과 같은 공공성을 띤 건물들은 대부분의 보행자가 보행동선을 이용하여 건물에 접근하는데도 불구하고 차량을 중심으로 동선이 운영되고 있는 실정이다. 차량위주의 동선 체계는 보행 통행자로 하여금 차량통행으로의 전환을 유도할 가능성이 있어 이에 대한 대책이 필요하다. 본 연구는 분석대상으로 차량과 보행자에게 동등하게 접근의 용이성을 제공해야 하는 광주시의 4대 종합병원을 대상으로 보행자 집단에게 가해지는 저항이 구체적으로 얼마나 심각하며, 그 원인은 어떠한 물리적 조건에 의하여 발생하는지 알아 보았다. 보행저항을 파악하기 위한 지표로는 차량과 보행자의 충돌점의 수, 최단거리 선호도, 보행로 미확보율 등을 설정하여 분석하였다. 이러한 분석의 결과 나타난 문제점들을 해결하기 위한 방안도 함께 모색하였다.

  • PDF